Assembling the BodyCraft 78500LP XPress Gym Pro II Multistation requires careful attention to detail. Follow these steps, referencing the official instruction manual for visuals and specifics. Begin by attaching the Weight Base Connector to the Base Frame using two 3/8" X 3" Hex Bolts, four 3/8" Washers, and two 3/8" Nylon Nuts. Next, secure the Long Leg Press Connector to the Base Frame utilizing the existing two 3/8" X 3" Hex Head Bolts and two 3/8" Washers. In the second step, connect the Leg Press Main Frame to both the Weight Base Connector and the Long Leg Press Connector with four 3/8" X 4" Hex Bolts, eight 3/8" Washers, and four 3/8" Nylon Nuts. Then, attach the Base Stabilizer to the Leg Press Main Frame. Afterwards, install the Rear Leg Press Support, Front Leg Press Support, Foot Plate Connector, Foot Plate, Leg Press Handles, Seat Pad, and Back Pad for Leg Press as detailed in the manual. Carefully assemble the Leg Press Cable, strictly following the routing instructions. Ensure all cables are correctly mounted and run through the pulleys. Before use, thoroughly check and tighten all bolts and cables. Pre-stretch the cables by applying force to remove any kinks and provide an initial stretch. Apply a household lubricant to the adjustable areas to improve performance. For any further assistance or questions regarding your BodyCraft 78500LP XPress Gym Pro II Multistation, consult your local BodyCraft dealer or their customer service department.
