Adjusting the hanging length of your Progress Lighting P500418 3-Light Aged Brass Coastal Cylinder LED fixture allows you to perfectly position it in your space. Here's a step-by-step guide:
-
Chain Holder Setup: Begin by attaching the chain holder (EE) to the [insert relevant part reference from manual, e.g., 'fixture body'] (FF). Thread hex nuts (AA) onto the [same part reference as above]. Then, secure this assembly to the mounting plate (CC) using the provided mounting screws. Attach the mounting plate (CC) to the outlet box.
-
Canopy Alignment: Slide the canopy (KK) over the chain holder (EE). Adjust the chain holder's depth so at least 1/4 of the threaded portion extends through the canopy hole. This is accomplished by altering the depth of the [same part reference as above] (FF) on the mounting plate (CC).
-
Determine Desired Length: Pass the fixture wires through the stem (B), cage (C), and chain loop (JJ). Secure one end of the stem (B) to the fixture's [part A] (A), and the other to the cage (C) using the chain loop (JJ).
-
Modify the Chain: Determine your desired hanging length. Remove chain links (GG) as needed. You may also trim the electrical and ground wires to the appropriate length. Leave at least 6 inches of wire extending past the chain holder (EE) for easy connections.
-
Chain Link Connections: Open a chain link on one end of the chain (GG) and attach it to the loop (JJ). Close the chain link securely with pliers. Connect the other end of the chain to the chain holder (EE) and use the quick link (HH) to fasten it tightly.
Following these steps ensures your Progress Lighting P500418 fixture is perfectly positioned. Always exercise caution when dealing with electrical connections, and consult a qualified electrician if you have any concerns.
