Changing the password on your SCS Sentinel AAA008 Wireless Keypad is a straightforward process, enhancing your security or personalizing access. Here's how to do it: First, press and hold the "11 C" button on the keypad for 12 seconds. You'll know you've done it correctly when you hear a long beep and see the red/blue lights flashing alternately. Next, enter the factory default password, which is "11111", and then press the "OK" button. You should hear two beeps, and the blue light will illuminate. Now, enter your new 4-digit password and press "OK" again until you hear two beeps and the blue light remains on. Finally, re-enter your new 4-digit password one more time and press "OK". You should hear three beeps, and the blue light will flash, confirming the successful programming of your new password. After updating your password, you can use it for various operations. For instance, to fully open your gate, dial "+ 11 new password + OK". To partially open the gate (pedestrian access), dial "+ new password + OK". If you need to program an additional receiver, you'd dial "+ 11 new password + OK". Should you need to reset the wireless keypad, locate the RESET button near the batteries and press it until you hear a long beep. Remember that if you have multiple keypads, each must use the same code for consistent operation. If you need any further assistance or encounter any issues, don't hesitate to reach out to SCS Sentinel's technical support using their contact information.
