Setting up your iRoom iO iTop OnWall docking station for your iPad is straightforward. Here's a step-by-step guide: First, make sure you install the included Backbox, as operating without it may void the warranty; consult the Backbox installation manual for detailed instructions. Next, connect the necessary cables to the mainboard, including the network cable. You can also connect an optional power cable if desired. For power, you have options: you can connect 110-240V AC wires according to the color code or utilize PoE+ (IEEE 802.3at) through a switch or injector. Assemble the docking station by attaching the back panel to the Backbox and securing it with screws. Then, connect the ribbon charging cable to the circuit board, aligning the markers, and use screws and magnets to attach the front panel to the rear panel. After that, feed the keypad cable through the front panel, attach the keypad bezel, and connect the power to boot the docking station. Now, download the free iOS App "iRoom's iDock" from the App Store. Dock your iPad into the iRoom iO iTop OnWall docking station. Open the "iRoom's iDock" app on your iPad and follow the on-screen instructions to configure the docking station. In the app, verify that the status shows "online" to confirm a successful docking procedure. If you want to change icons, unplug the keypad cable, power cycle the docking station, and reconnect the cable. Following these steps and referring to the user manual will help you successfully configure your iRoom iO iTop OnWall docking station.
