Setting up your KING VQ4510 Tailgater Bundle Portable Satellite is straightforward. Follow these steps for a successful setup: First, locate a spot with a clear view of the southern sky, ensuring no obstructions like trees or buildings are in the way. If not already done, attach the rubber feet to the antenna unit. Next, connect one end of the provided RG-6 coax cable to the MAIN port on your KING Tailgater and the other end to the SATELLITE IN port on your receiver. Plug the receiver into a 110-volt AC power source; the green power light should illuminate. Then, connect your TV to the receiver using an appropriate cable (HDMI, etc.) and select the corresponding input on your TV. Use your receiver's remote to press SAT and then RECORD. Verify that CONTINUE is highlighted and press SELECT. On the Portable Antenna Setup screen, use the arrow keys to select the letter group containing the first letter of your state, then press SELECT. Choose your state from the menu and press SELECT again. Ensure Scan is highlighted and press SELECT to start the scan, which may take several minutes. The receiver will download software, which could take 20-25 minutes, then reset. Repeat the scan process. Once complete, an Acquiring Signal message will appear; this may take up to 5 minutes. Finally, after the signal is acquired, you can activate your service by calling 1-800-963-DISH (3474). Allow approximately 10 minutes for the electronic program guide to download. If you encounter any issues, consult the user manual or contact KING's customer support.
