How do I perform a firmware update on my Atlona AT-HDR-EX-100CEA-RX receiver?

[Hubert]

Keeping your Atlona AT-HDR-EX-100CEA-RX receiver's firmware current is essential for peak performance and compatibility. Here's how to update the firmware, following the steps from the installation guide:

1. Begin by downloading the latest firmware file from the "Firmware" section on the Atlona website (ensure you're on the page for the AT-HDR-EX-100CEA-RX model).
2. Extract the downloaded firmware file to a convenient location on your computer, such as your desktop.
3. Carefully disconnect the Ethernet cable from the HDBaseT IN port on the receiver.
4. Using a mini-USB to USB-A cable, connect the "FW" port on the receiver to an available USB port on your computer where the firmware file is located.
5. Reconnect the Ethernet cable to the HDBaseT IN port on the receiver.
6. After a few moments, your computer should recognize the device as a USB drive. If it doesn't appear, check in Windows Explorer.
7. If any files exist on the USB drive, delete them to prepare for the new firmware.
8. Drag and drop the firmware file onto the drive. The receiver's green power LED will flash during the firmware loading process.
9. Once the LED turns solid green, the firmware update is complete. Safely disconnect the receiver from your computer.

Following these steps will successfully update the firmware on your Atlona AT-HDR-EX-100CEA-RX receiver, ensuring you have the latest features and improvements.