
Pairing a Wireless Universal Voltage Dimming Switchpack with a Wireless Area Controller (WAC) in your WaveLinx Pro system involves a few simple steps. First, when you power up the Relay Switchpack, it initially turns ON (closed), and the 0-10V output is set to 75% light output. To begin pairing, press and release the commissioning button on the Relay Switchpack; this action toggles the Relay state. Observe the on the Relay Switchpack; its state indicates the Relay's status. Once the Relay Switchpack joins the WaveLinx Pro wireless network, the Relay will turn OFF for 5 minutes. This is a visual check to identify which fixtures received the join beacon from the WAC. Make a note of any fixtures that did not turn OFF during this 5-minute period, as they will remain at 75% or full brightness. Upon completion of the pairing and the 5-minute OFF period, all relays become part of the default area and dimmable zone. For more detailed configuration, consult the WaveLinx Pro Mobile App manual to finalize your setup. If you run into any issues, consult the troubleshooting section of the manual, or reach out to Technical Services for further assistance.


