To customize the hanging length of your Progress Lighting P500418 3-Light Aged Brass Coastal Cylinder LED fixture, follow these steps. First, attach the chain holder (EE) to the xxxx (FF) and thread the hex nuts (AA) onto the xxxx. Secure this assembly to the mounting plate (CC) and then install the plate to your outlet box using the provided screws. Next, position the canopy (KK) over the chain holder (EE) and adjust the chain holder so that at least one-quarter of the threaded portion is visible through the canopy hole. This adjustment involves fine-tuning the depth of the xxxx (FF) on the mounting plate (CC). Now, decide on your desired hanging length. Feed the wires through the stem (B), the cage (C), and the chain loop (JJ). Tighten one end of the stem (B) onto the fixture's xxxx (A) and attach the other end to the cage (C) using the chain loop (JJ) to ensure a secure connection. To achieve the perfect length, remove the necessary chain links (GG) and, if needed, trim the electrical and ground wires to your preference. Remember to leave at least 6 inches of wire extending past the chain holder (EE) for convenient connections later on. Finally, open a chain link at one end of the chain (GG) and connect it to the loop (JJ). Close the chain link tightly using pliers. Attach the other end to the chain holder (EE) and secure it with the quick link (HH). By following these steps, you can perfectly tailor the hanging length of your Progress Lighting fixture to fit your space. Always prioritize safety and consult a qualified electrician if you have any doubts about electrical connections.
