To install your ZEVNI A04604 Bamako 9 Inch H Brass Wall Sconce safely and correctly, follow these steps: First, gather all necessary tools and components as detailed in the instruction manual. Safety is paramount: cut off the power supply at both the main circuit breaker and the wall switch before beginning. Next, begin the assembly process. Unscrew the nuts (F) from the back plate (E) and set them aside. Pass the electrical supply wires through the mounting plate (D), and then secure this plate to your outlet box using the provided mounting screws (A). Connect the wires according to the wiring diagram included, making sure to properly connect the ground wire. Align the holes in the back plate (E) with the pre-assembled mounting screws and attach the back plate to the mounting plate, using the nuts you set aside earlier. Tighten them until the back plate is flush against the wall. Then, unscrew the socket ring (I) from the socket (G), place the glass shade (H) over the socket, and secure it with the socket ring. Finally, insert a light bulb with the recommended wattage (not included). Before restoring power, double-check that all components are correctly installed. For cleaning, use a soft cloth on the fixture. Use a mild cleaner for the glass shade, and avoid abrasive materials. Keep the instruction manual for future reference, and for ordering replacement parts from the original point of purchase, using the exact wording from the illustration in the manual.
