Installing the ZEVNI A04404 Mordy 7 Inch H Black Wall Sconce involves a few straightforward steps. First, gather the necessary tools; these are not included, but the manual's illustration shows what you'll need. Safety first: turn off the power at your home's main fuse box or circuit breaker, and also ensure the wall switch for the sconce is off. Next, follow these assembly steps:
- Unscrew the xxxx nuts (I) from the back plate (E) and set them aside.
- Pass the supply wires from the outlet box through the mounting plate (D). Secure the mounting plate to the outlet box using the provided mounting screws (A).
- Connect the wires according to the wire connection chart in the manual. Properly connect the ground wire, and use plastic wire connectors and electrical tape for secure connections.
- Align the holes in the back plate (E) with the pre-assembled mounting screws. Attach the back plate to the mounting plate using the xxxx nuts (I), ensuring the back plate is snug against the wall.
- Attach the glass shade (H) onto the socket (G). Adjust the light angle using the swivel joint (F) by pressing the socket up and down within 90 degrees.
After installation, double-check that all components are correctly installed and securely mounted. Before turning the light on, confirm everything is in place. For replacement parts or any other questions, consult the contact details in the manual. Keep the manual handy for future reference and cleaning instructions. Following these steps, your ZEVNI A04404 Mordy 7 Inch H Black Wall Sconce should be successfully installed.
