Installing your Signature Hardware Stavros Vanity Sconce involves several steps to ensure both functionality and safety. Always prioritize safety by consulting a qualified electrician if you are not comfortable with electrical work. Begin by turning off the power at the circuit breaker or fuse box for the circuit you will be working on. Before starting, unpack and inspect the sconce for any shipping damage; if any is found, contact Signature Hardware customer service.
Gather all necessary tools and components as listed in the Stavros Vanity Sconce manual.
Here’s a step-by-step guide based on the provided instructions:
- Prepare the Mounting: Thread the mounting screws into the matching holes on the circular strap. Secure the circular strap to the outlet box using the outlet box screws.
- Wiring: Connect the white wire from the Signature Hardware Stavros Vanity Sconce to the white wire from your outlet box, and the black wire from the sconce to the black wire from the outlet box. Use the provided wire connectors and electrical tape to ensure a secure connection. Connect the copper ground wires from the fixture and the outlet box to the ground screw on the circular strap. Carefully tuck the wires inside the outlet box.
- Attach the Sconce: Raise the front plate, allowing the mounting screws to protrude through the holes on the front plate, and then secure it using the ball nuts.
- Install the Glass and Bulb: Slip the glass over the socket and insert the clip into the glass holder. Install the light bulb supplied with the Signature Hardware Stavros Vanity Sconce, making sure not to exceed the maximum wattage indicated on the socket.
For maintenance, wipe the fixture with a soft cloth. Clean the glass with mild soap. Avoid abrasive materials. For additional help, consult the Signature Hardware Help Center online or contact their Customer Service for product and warranty information. Following these steps and prioritizing safety will help you successfully install your Signature Hardware Stavros Vanity Sconce.
