How do I install the Signature Hardware Shockoe Single Light Outdoor Wall Sconce?

[JaceFitz]

Installing the Signature Hardware 941510 Shockoe Single Light 14 Inch Tall LED Outdoor Wall Sconce correctly involves a few key steps. First, ensure safety by turning off the power at the circuit breaker and removing any existing fixture. Next, unpack all the components and lay them out to avoid losing any small parts. Assemble the mounting plate by threading the two mounting screws and attaching the plate to the outlet box using outlet box screws. For the wiring, connect the black fixture wire to the black (hot) house wire, and the white fixture wire to the white (neutral) house wire, securing all connections with wire nuts and electrical tape. If your outlet has a ground wire, connect the fixture's ground wire to it; otherwise, connect the fixture's ground wire directly to the mounting plate. Neatly tuck the wires into the junction box. Attach the fixture to the mounting plate with the mounting screws and secure with cap nuts. To protect against moisture, apply clear caulk around the fixture's backplate where it meets the wall, leaving a small gap at the bottom for drainage. Finally, double-check all connections before restoring power. For more detailed guidance, consult the manual or contact Signature Hardware customer service.