How do I install the guide bar and chain on my EGO POWER PS1000E 56V Cordless Pole Saw?

[StNaomi]

Assembling the guide bar and chain on your EGO POWER PS1000E pole saw is straightforward. Here's a step-by-step guide: First, place the pole saw on a stable, level surface with the side cover facing up. Remember to wear gloves for safety. Next, remove the side cover. Then, take your new saw chain and lay it out flat, making sure to remove any kinks. Position the chain drive links into the groove of the guide bar, ensuring there's a loop at the back. Hold the chain in place on the guide bar and loop it around the drive sprocket on the pole saw. Make sure the chain's direction matches the arrow on the tool housing and the way the cutters on the guide bar are shaped. Now, reattach the side cover to the housing, lining up the holes and pins, and securely fasten the bolt. Finally, tighten the quick chain-tension adjuster fully clockwise to secure the chain. Rotate the chain by hand to check if it moves freely without any issues. If there's any binding, disassemble and reassemble the chain and bar. Following these steps will help you correctly assemble the guide bar and chain on your EGO POWER PS1000E pole saw.