How can I customize the sensitivity and timing of my VYNCO VMOSS-VMOSSB Flush Mount 360° Ceiling Sensor?

[MartinMarie]

To fine-tune the sensitivity and timing of your VYNCO VMOSS-VMOSSB Flush Mount 360° Ceiling Sensor, follow these steps: First, ensure the sensor is properly installed. Set the time dial to its minimum (5 seconds) and the lux dial to its minimum (DAY). Power on the lights or the connected load. It might activate briefly (about 30 seconds) during the sensor's warm-up and then turn off. Walk through the detection zone; the lights should activate, confirming correct wiring. Next, adjust the time dial to your preferred setting. To set the ambient light level, start with the lux dial at its minimum (night). When the ambient light reaches your desired level, have someone continuously walk through the detection zone while you gradually increase the lux dial. The sensor will trigger the lights ON at the correct ambient light level. For a functional daylight test: Confirm proper wiring by a qualified professional, adhering to the installation guide. Set both lux and duration to minimum. Cover the sensor with its packaging to bypass the lux control and activate the PIR; this ensures the load connection is correct. Once confirmed, adjust both the lux and time dials to your preferred settings. By following these steps, you can tailor the VYNCO VMOSS-VMOSSB Flush Mount 360° Ceiling Sensor's performance to perfectly match your environment.