Installing the ZEVNI A04697 Mavis 27" Wide Black Vanity Light requires careful attention to safety and procedure. Before you begin, always prioritize safety by turning off the power at both the main circuit breaker and the wall switch connected to the existing light fixture. Ensure the mounting surface is clean, dry, and strong enough to support the light's weight. Use 120V voltage and do not exceed 40W per bulb. Keep the fixture away from acidic and alkaline substances. Always allow bulbs to cool before handling them.
Here’s a step-by-step guide:
- Preparation: Gather your tools (not included: Green ground wire, mounting plate, backplate, screws, arm, sockets, glass shades, socket rings) and the included accessories (mounting screws, plastic wire connectors). Carefully unpack the fixture and ensure all parts are present.
- Mounting the Plate: Unscrew the screws from the backplate and set them aside. Pass the supply wires through the mounting plate and secure it to the outlet box using the mounting screws.
- Wiring: Make wire connections following the wiring diagram provided in the instruction manual, paying close attention to the ground wire connection.
- Assembly: Position the backplate and mounting plate in place and secure them with the screws you set aside. Place the glass shades onto the sockets and secure them with socket rings.
- Bulb Installation: Install bulbs (not included) that match the recommended wattage.
- Final Check: Double-check all connections and the fixture's stability before restoring power.
To clean the fixture, use a soft cloth. Clean glass components with a mild cleaner, avoiding abrasive materials. Keep the instruction manual for future reference, especially if replacement parts are needed. Parts can be ordered from the place of purchase using the exact wording from the illustration in the manual. For any further assistance or clarification, you can contact ihomeangel.com at +1 850 296 2377 or email homecustomercare@outlook.com during working hours.
