Installing your EMOS 1546137500 LED Highbay light fixture is straightforward with the two mounting options provided: Loop and Bracket. Here's a breakdown to guide you:
Loop Mounting Method
- Attach the loop with the gasket to the luminaire in the designated spot.
- Hang the luminaire from a hook.
- Connect the wiring to the power supply cable: Brown to L, Blue to N, and Green to G.
- Connect the wiring for dimming: Purple to Dim+, and Grey to Dim-.
- The recommended installation height is 2.5 meters.
Bracket Mounting Method
- Remove the four screws securing the driver.
- Place the bracket between the driver and the luminaire body.
- Re-insert the screws to their original positions.
- Install two M8 expanding bolts onto the mounting surface, aligning them with the holes on the luminaire.
- Loosen the auxiliary screws on both sides of the bracket.
- Adjust the luminaire to the desired angle, and then tighten the auxiliary screws.
- Connect the wiring to the power supply cable: Brown to L, Blue to N, and Green to G.
- Connect the wiring for dimming: Purple to Dim+, and Grey to Dim-.
- The recommended installation height is 2.5 meters.
Always consult the EMOS 1546137500 LED Highbay manual for detailed diagrams and safety information during installation.