Installing your new Cecily FR30600HBR Fredrick Ramond LED Wall Sconce is a straightforward process when following these steps. First, prepare for installation by finding a clear workspace and unpacking the fixture and glass components. Carefully review the provided instructions before you begin. For mounting, detach the mounting plate (A) from the backplate (C) by unscrewing the screws (E). Attach the mounting bracket (A) to the junction box (J) using two 8-32 screws, ensuring the threaded holes are on the side and the plate is level. Next, make the necessary wiring connections according to the provided instruction sheet (I.S. 18). To install the glass, remove the outer sleeve (O) and loosen the set screws (S) on the glass fitter (F) using the Allen wrench. Slide the round end of the glass (G) into the glass fitter (F) and tighten the set screws. Secure the outer sleeve over the glass. When wiring, connect the positive supply wire to the positive fixture lead and the negative supply wire to the negative fixture lead. For outdoor fixtures, use silicone sealant for a watertight seal. Always remember to turn off the power supply before installation and consult with a qualified electrician if new wiring is required. Seal any gaps with caulk to prevent water entry. Following these instructions will help you successfully install your Cecily FR30600HBR Fredrick Ramond LED Wall Sconce.
