Installing the Eurotech Lighting KP914 Daisy Pendant safely and correctly involves these steps: 1. Mounting the Fixture: Begin by using the provided mounting brackets as a template to mark and drill two holes in your ceiling. Insert the white expansion tubes into these holes. Secure the brackets to the ceiling by screwing them into the expansion tubes through the bracket holes. 2. Connecting the Wires: Carefully connect the wires to the connector block, making sure to match the live, neutral, and earth markings. Next, attach the ceiling rose to the mounting bracket. 3. Finalizing the Installation: Once all wires are correctly connected, insert the LED lamp into the fitting and attach the glass. Before turning on the light, double-check your work to ensure everything is secure. 4. Safety First: It is crucial that a licensed electrician performs the installation, in compliance with all local regulations. Ensure wires are not pinched or damaged by sharp edges during installation. Clean the light fixture with a soft cloth and a pH-neutral detergent. Note that any misuse or modifications to the pendant will void the warranty. Avoid installing the pendant on unstable or damaged surfaces, or in areas with extreme temperatures or corrosive or explosive materials. Always refer to the Eurotech Lighting KP914 Daisy Pendant's specific instructions for the most accurate and up-to-date guidance.
