Balancing your camera on the CARTONI Lambda 25 Fluid Head is essential for smooth and professional-quality filming. Follow these steps to ensure your camera is perfectly balanced:
-
Release Camera Plate: Begin by pulling the red safety lever completely open to release the camera plate.
-
Attach Camera Plate: Secure the camera plate beneath your camera assembly using both screws, ensuring it's centered, considering your camera's center of gravity (CG).
-
Mount Camera: Place your camera onto the Lambda 25, leaning it against the external sliding base. Push the assembly horizontally until the red safety lever clicks, then fully engage the lever to lock it.
-
Find Camera Center of Gravity (CG): Unlock both vertical slide locking knobs. Use the outer slide crank to adjust the vertical position until the camera's CG is balanced. Once balanced, lock the vertical slide locking knobs.
-
Adjust Camera Mounting Bracket: Unlock both camera mounting bracket locking knobs and adjust the main vertical slide length to match your camera's dimensions. Use the crank to position the bracket and then secure it by locking the knobs.
-
Align Camera Center of Gravity: Unlock the horizontal slide locking knobs and position the slide. Ensure the camera assembly's CG aligns with the pan unit axis to maximize head performance and minimize offsets.
-
Test Rotation: Verify the camera can rotate 360 degrees around the tilt position using the adjustable main pan bar.
-
Adjust Drag Selectors: Fine-tune the pan and tilt drag selectors to your desired level of drag and unlock the pan lock.
By carefully following these steps, you can achieve optimal balance, leading to smooth, stable, and professional-looking camera movements with your CARTONI Lambda 25 Fluid Head.
