How do I adjust the high-frequency unit for different coverage patterns on my TW AUDiO VERA36?

[MacJonathan]

To modify the horizontal coverage of your TW AUDiO VERA36 10-inch 3-way compact PA loudspeaker, you'll need to adjust the high-frequency unit. Here's a step-by-step guide:

1. Preparation: Place the VERA36 speaker on a clean, stable surface with the front grill facing up.
2. Safety First: Ensure the speaker is secure and cannot move during the process. Consider having someone assist you.
3. Grill Removal: Use a TX25 hexalobular key to remove the four grill mounting screws on the left and right sides of the enclosure.
4. Disconnect: Carefully unplug the connector from the high-frequency unit.
5. Unscrew the Unit: Use a tool with SW8 to loosen the two screws holding the high-frequency unit.
6. Remove the Old Unit: Gently pull the high-frequency unit upward, out of the enclosure.
7. Install the New Unit: Position the new high-frequency unit into the guide groove until it fits snugly against the rear of the enclosure.
8. Reconnect: Plug the high-frequency unit back into the connection plate.
9. Reattach the Grill: Securely reattach the front grill using the screws you removed earlier.
10. Update Markings: Update the marking on the rear rigging to reflect the new high-frequency unit variant. This will help you keep track of your setup.

Always consult the TW AUDiO VERA36 user manual for detailed diagrams and any additional safety information before proceeding.