How do I assemble the wheel kit for my Champion CPG2500 generator

[MacZachary]

Assembling the wheel kit on your Champion CPG2500 Portable Generator makes it much easier to move. Here’s a step-by-step guide:

1. Gather Your Tools: You'll need a 17 mm wrench or adjustable wrench, a socket wrench with a 16 mm socket, and pliers.
2. Prepare the Generator: Before adding fuel or oil, carefully tip the generator onto its side.
3. Attach the Wheels:
   • Slide an M10x120 flange bolt through a washer, a sleeve, and then through one of the wheels.
   • Insert the bolt through the mounting point on the generator frame.
   • Secure the wheel with an M10 lock nut, tightening it firmly.
   • Repeat these steps to attach the second wheel.
4. Install the Support Leg:
   • Attach the vibration mounts to the support leg using flange bolts (M8 x 25) and flange lock nuts.
   • Connect the support leg to the generator frame using flange bolts (M8 x 16) and flange lock nuts. Tighten securely, but avoid over-tightening.
   • Gently set the generator down so it rests on the wheels and support leg. Always consult your Champion CPG2500 Portable Generator's manual for detailed diagrams and safety information.