Connecting your 797 Audio CR86 condenser microphone to your computer for recording requires a few steps. You'll need an audio interface or mixer with an XLR input. Here's a step-by-step guide:
- Power Up: Ensure your audio interface or mixer is powered on and connected to your computer via USB or another appropriate cable.
- Locate the XLR Output: Find the XLR output on the back of your 797 Audio CR86 microphone. It's a three-pin connector.
- Connect the XLR Cable: Take an XLR cable (not included with the microphone) and plug one end into the microphone's XLR output.
- Connect to the Interface/Mixer: Plug the other end of the XLR cable into the XLR input of your audio interface or mixer. This is also a three-pin connector.
- Select Input Device: In your computer's audio settings, select your audio interface or mixer as the input device. This process varies depending on whether you're using Windows or macOS.
- Choose Input in Recording Software: Open your recording software and select your audio interface or mixer as the input source for the track you'll be recording on.
- Set Gain Levels: Adjust the gain levels on your audio interface or mixer. The goal is to achieve a good audio level without clipping (distortion). Refer to your audio interface or mixer's manual for specific instructions on gain control.
- Start Recording: You're now ready to record with your 797 Audio CR86 condenser microphone!
For more detailed instructions, consult the user manual of your specific audio interface or mixer. These instructions provide a general overview, and settings may vary slightly depending on your equipment.
