···
Log in / Register

Can the GE CYNC Smart Light Switch work with C by GE and other smart plugs?

1Answers
ReedAnn
12/17/2025, 06:49:14 PM

Yes, the GE CSWONBLPWF1NN/ST1P CYNC Smart Light Switch can control your C by GE smart plugs. To achieve this, simply add both the switch and your C by GE plugs to the same room within the CYNC app. Unfortunately, this particular smart switch is not designed to be compatible with smart plugs from other brands.

Was this review help?
113
Share
More Q&A

What's the best way to clean and maintain my FLPRO Series Semi Flexible Solar Modules?

Keeping your FLPRO Series Semi Flexible Solar Modules in top condition is easy with these simple steps. To clean your modules: Use a soft cloth, either dry or slightly dampened with lukewarm water, to gently wipe the front surface. Avoid harsh chemicals, detergents, or abrasive tools like scrapers and high-pressure washers, as these can damage the modules. Refrain from using any greasy substances or metal tools. For areas experiencing winter weather, carefully remove snow and ice with a very soft broom to prevent damage to the module's protective layer. Perform a visual inspection at least annually, checking all connections and fixings to ensure they are secure and free from corrosion. Regular maintenance ensures your FLPRO Series Semi Flexible Solar Modules continue to provide optimal performance and a long lifespan.
116
Share

How can I verify my device is charging correctly with the Hama 00183259 USB A 12W Car Charger?

To confirm your device is charging correctly using the Hama 00183259 USB A 12W Car Charger, follow these steps: Device Compatibility Check: Before connecting, ensure your device can safely use the charger's 12W power output. Verify your device's power requirements do not exceed 12W. Connection Procedure: Plug the charger into your car's power outlet, then connect your device to the charger. Your device should display a charging status indicator. Monitor Charging Status: Observe your device's charging icon or LED indicator. This confirms the charging is in progress. Interrupting Charging: To pause charging, or when your device is fully charged, disconnect your device from the charger. Disconnecting the Charger: Remove the charger from the car's power outlet when charging is complete or when not in use. Charging Time Awareness: When charging devices with built-in rechargeable batteries, adhere to the specified maximum charging times to avoid overcharging. Car Battery Consideration: Some vehicles provide power even with the ignition off. To avoid draining your car battery, disconnect the Hama charger when the car is not in use. By following these steps, you can confidently ensure your device is charging properly with the Hama 00183259 USB A 12W Car Charger.
107
Share

How do I know when to charge the Streamlight Vulcan Clutch rechargeable lantern?

The Streamlight Vulcan Clutch rechargeable multi-function lantern features a helpful battery/charge status LED indicator. This indicator makes it easy to monitor the battery level. Here's what the different LED behaviors mean: A green LED that lights up for two seconds after the lantern is turned on signals that the battery is adequately charged. A solid red LED indicates that it's time to recharge the battery soon. A flashing red LED warns that the battery is depleted, and the lantern will soon shut down. By observing these LED signals, you can proactively manage your Streamlight Vulcan Clutch's power and ensure it's always ready when you need it.
109
Share

How do I change the unit on my TROTEC BQ16 HCHO-TVOC device from PPM to mg/m3?

To convert the unit of measurement from parts per million (PPM) to milligrams per cubic meter (mg/m3) on your TROTEC BQ16 HCHO-TVOC Measuring Device, follow these simple steps: First, press the SET button on the device. When you press the SET button, the displayed unit will toggle between PPM and mg/m3. Keep in mind that the conversion factor is 1 ppm = 1.226 mg/m3 for both formaldehyde (HCHO) and volatile organic compounds (TVOC). Release the SET button when your preferred unit, mg/m3, is displayed. This will set your TROTEC BQ16 to show readings in mg/m3.
102
Share

How do I ensure my MCOCOD DS13 Double Sliding Frameless Shower Door glass is perfectly aligned and level?

Achieving perfect alignment and level for your MCOCOD DS13 Double Sliding Frameless Shower Door glass panels is straightforward. Here's how, based on the instruction manual: Roller Adjustment: Begin by using the adjustable rollers. These allow for minor height and level corrections to compensate for any slight wall imperfections. It's best if any wall offset is no more than 1/4 inch. Glass Installation: After the rollers are adjusted, carefully hang the glass door onto the guide rail. You can further refine the height and level at this stage by fine-tuning the rollers until the glass fits precisely within your shower opening. Guide Block Installation: Once the glass is correctly positioned, use a level to verify both vertical and horizontal alignment. Finally, install the glass guide block. This secures the glass panels in their ideal position, completing the adjustment process. By following these steps, you'll ensure your MCOCOD DS13 shower door not only looks great but also functions flawlessly.
116
Share

How do I safely anchor my SECURE H14017 6-Tier Bookshelf to the wall to prevent it from tipping?

To ensure your SECURE H14017 6-Tier Bookshelf remains stable and prevents potential accidents, it's crucial to anchor it to the wall. Here's how to do it, based on the manufacturer's instructions: Positioning: Place your bookshelf in its final location against the wall. Wall Preparation: Drill two holes into the wall, aligning them with the height and position indicated by the anti-tip hardware included with your bookshelf. Refer to the instruction manual for precise measurements. Secure with Plastic Screws: Insert the provided plastic screws into the drilled holes. Make sure they are firmly seated. Anti-Falling Device Installation: Fold part H in half and attach it to both sides of the bookshelf. Use screws (G) through the top holes and lock them into the plastic pieces (F) to complete this anti-falling device installation. Tip-Over Restraint: Always use the tip-over restraint supplied with the bookshelf. This additional safety measure further reduces the risk of tipping. By following these steps, you significantly decrease the chance of your SECURE H14017 6-Tier Bookshelf tipping over, providing a safer environment, particularly if you have children or pets.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.