···
Log in / Register

Will points be deducted if the uphill slope is less than 30 cm in Subject 2?

6Answers
VanDelaney
07/29/2025, 10:16:03 PM

No points will be deducted if the uphill slope is less than 30 cm in Subject 2. Below is a relevant introduction about Subject 2: Point deduction situations in the Subject 2 test: No fixed-point parking, the front bumper of the vehicle not reaching the control line after stopping, rolling backward more than 30 cm after stopping, rolling backward less than 30 cm after stopping, not turning on the left turn signal when starting, the vehicle running over the solid edge line of the road during driving, the front bumper not reaching the parking line after stopping, the right front wheel being more than 30 cm away from the edge line when parking, and exceeding 30 seconds when starting. Subject 2 test techniques: When controlling the clutch, it is essential to maintain a steady speed and drive uniformly. Loosen the clutch slightly when turning the steering wheel one full turn to prevent the car from stopping. Do not stop midway during the test, and when stopping, be sure to press the brake pedal fully. Failure to do either of these will affect the test score.

Was this review help?
103
Share
MacAriana
08/15/2025, 04:19:43 AM

I remember when I was learning to drive and taking the Subject 2 test, the uphill stop at a designated point was a must-practice item. At that time, the instructor repeatedly emphasized that the front bumper of the vehicle must stay within 30 centimeters of the designated line to avoid any penalty; if it exceeded 30 centimeters but didn't reach 50 centimeters, 10 points would be deducted, which was quite nerve-wracking. During my test, I carefully watched the rearview mirror and the reference points on the front of the car, meticulously controlling the position, and ended up stopping at about 25 centimeters. The examiner nodded without deducting any points. Actually, controlling this distance isn't just for the test—it's very practical in real driving situations, like stopping on a slope at a traffic light to avoid rolling back and hitting the car in front, which greatly improves safety. So don't worry too much about staying under 30 centimeters; just practice well. The key is to maintain a stable mindset and practice several times to get the feel for it.

Was this review help?
9
Share
Expand All
AdelineLynn
10/21/2025, 01:16:18 AM

I just passed the driving test's second section, and the uphill stop left a deep impression on me! The instructor clearly said that as long as the front bumper is within 30 centimeters of the stop line, no points would be deducted. Even though I practiced every day, I was still a bit nervous. On the exam day, it was raining, and I was afraid of exceeding the distance. Fortunately, I used the windshield wiper as a reference to aim and stopped at about 28 centimeters. The examiner said it was fine. If it's more than 30 centimeters but less than 50, 10 points are deducted. Exceeding 50 centimeters means an automatic fail, but the passing score is 80, so don't let this affect you too much. I think adjusting the rearview mirror angle and controlling the speed during practice are crucial, as poor distance estimation can cost you.

Was this review help?
18
Share
Expand All
VioletMarie
12/04/2025, 12:42:17 AM

In the driving test regulations, the hill start and stop exercise in Subject 2 has clear criteria: no points are deducted if the front of the vehicle is within 30 cm of the designated line, as this is considered a safe range. Exceeding 30 cm results in a 10-point deduction, and if the distance is too large (e.g., over 50 cm), it leads to an immediate 100-point deduction and failure. I understand this rule is designed to assess the candidate's ability to precisely control the vehicle's position. During practice, fixed reference points on the car should be used to assist in visual estimation to avoid mistakes caused by excessive nervousness. This is not just a test requirement but also helps effectively reduce the risk of scratches in future driving.

Was this review help?
15
Share
Expand All
Tina
01/24/2026, 02:05:44 AM

Hey buddy, during the Category 2 driving test, keeping within 30 cm on the slope is absolutely fine—no points deducted! I've seen many friends pass by just ensuring the front of the car isn't too far from the stopping line. Going over 30 cm might cost a few points, but it's not a big deal as long as you pass overall. I recommend practicing by finding a good reference point, like aligning the center of the wiper with your target, and trying it a few times until you get it right. This little trick also helps prevent rolling back when driving later on.

Was this review help?
6
Share
Expand All
MilesRose
04/20/2026, 01:12:38 AM

The regulation in the driving test's Subject 2 uphill stop, where a distance of less than 30 cm is not penalized, made me realize that rules are not just about assessment but also about cultivating safe habits. In real driving, maintaining an appropriate distance during hill starts can prevent rear-end collisions or rollback accidents. Looking back on this training after several years of driving, I deeply appreciate its practicality. Exceeding 30 cm in the test results in a 10-point deduction, but the key lies in mastering the skills to enhance driving safety awareness, which greatly contributes to overall driving proficiency.

Was this review help?
10
Share
Expand All
More Q&A

What Are the Causes of Lithium Battery Degradation?

Lithium battery capacity degradation occurs due to the following reasons: 1. Lithium battery abuse: When the State of Charge (SOC) is below 120%, there is no significant capacity loss. However, when SOC exceeds 120%, lithium deposition begins at the anode, and due to the formation of a thicker SEI film, impedance increases, leading to the loss of active lithium. Continued overcharging can cause thermal runaway in lithium batteries. At excessively high SOC levels, the decomposition rate of the electrolyte accelerates, forming a thick deposition layer on the graphite anode, which contains precipitated lithium. High-rate charging and discharging also contribute to capacity loss, as the cathode and anode undergo volume contraction and expansion during the process. The larger the charging and discharging current, the more intense the contraction and expansion, leading to greater stress. Consequently, particles in the cathode and anode are more prone to fracture or detachment from the current collector due to rapid volume changes, accelerating cycle degradation. 2. Temperature factors: The usage environment and conditions of lithium batteries significantly impact their capacity. Temperature is undoubtedly one of the key factors affecting lithium battery lifespan. Excessively high or low temperatures reduce the content of active lithium ions, damage the structure of electrode materials, and cause metal ion dissolution, leading to severe capacity degradation. Conventional lithium batteries operate within a temperature range of -20°C to 60°C. Generally, performance declines below 0°C, and discharge capacity decreases accordingly. Therefore, the optimal operating temperature for lithium batteries is typically 0°C to 40°C. Lithium batteries designed for special environments may have different temperature requirements, with some even capable of normal operation at temperatures exceeding 100°C. 3. The primary factors affecting lithium battery capacity degradation include structural damage or deactivation of cathode and anode materials, electrolyte decomposition, and battery abuse. The charging and discharging process of a battery is a complex electrochemical process, and the factors leading to capacity degradation are not singular. Additionally, deterioration in one aspect may trigger other factors that collectively impact the battery's capacity, cycle performance, and energy density.
106
Share

What are the types of transmissions and their respective characteristics?

Automatic transmissions are divided into AT transmissions, CVT transmissions, AMT transmissions, and DCT transmissions. The specific introductions are as follows: AT transmission: This is the most commonly encountered type of automatic transmission. Its advantage is that the power delivery is "more direct," but it also has notable disadvantages, such as a noticeable jerk during acceleration and relatively higher fuel consumption. CVT transmission: Primarily represented by Japanese cars, models from Honda and Nissan mostly use CVT transmissions. The characteristics of CVT transmissions are quite distinct. Since the gear ratio is not a series of discrete points but a continuous range of values, the smoothness is excellent, and fuel efficiency is also quite outstanding. The downside is that the instantaneous power output lacks a burst point, making it relatively gentle. AMT transmission: Short for Automated Manual Transmission, the AMT transmission is a compromise between MT and AT transmissions. Its advantage is the relatively low production cost, and operation is more convenient compared to manual transmissions. DCT transmission: Short for Dual Clutch Transmission, the DCT, as the name suggests, uses two sets of clutches that work alternately.
112
Share

What are the differences between the 3 Series GT and the 3 Series?

The differences between the 3 Series GT and the 3 Series lie in the fact that the former focuses on performance, while the latter is more practical. Here are the relevant details: 1. The 3 Series GT is an original imported model, while the regular 3 Series is domestically produced. 2. In terms of power, the BMW 3 Series is equipped with a 1.5T inline 3-cylinder turbocharged engine, whereas the 3 Series GT is equipped with a 2.0T inline 4-cylinder turbocharged engine. The former has a maximum power and torque of 100kW/220N·m, while the latter boasts a maximum power and torque of 135kW/270N·m. From a performance perspective, the latter offers more power. 3. In terms of dimensions, the BMW 3 Series measures 4643x1811x1454mm with a wheelbase of 2810mm, while the 3 Series GT measures 4824x1828x1518mm with a wheelbase of 2920mm. 4. Regarding features, the 3 Series GT includes many additional items compared to the regular 3 Series, such as rear side airbags, collision warning, automatic emergency braking, rearview camera, panoramic sunroof, automatic anti-glare interior/exterior mirrors, and an electric trunk lid. 5. In terms of exterior design, the 3 Series GT adopts a hatchback-style design, making it more visually appealing than the regular 3 Series.
117
Share

What is Vapor Lock in Cars?

Vapor lock refers to the blockage of fuel lines by air due to high temperatures, which prevents fuel from reaching the engine and causes it to stall. Here are some fuel-saving driving tips: Maintain Good Driving Habits: When accelerating, the engine needs to increase power output, and every time you brake, the energy generated by this power is lost as heat. Therefore, it is important to anticipate traffic conditions in advance, avoid congested roads whenever possible, and minimize stop-and-go situations. Reduce Unnecessary Vehicle Load: The heavier the vehicle, the greater the increase in fuel consumption. Therefore, unnecessary heavy objects on the vehicle should be minimized. For example, external accessories such as roof boxes, roof rails, and bike racks should be removed when not in use. These not only add weight to the vehicle but also alter the airflow around the car, increasing air resistance.
105
Share

What should be paid attention to when driving a car for a long distance?

Before driving long distances, it is best to conduct a comprehensive inspection of the vehicle, checking all parts that are prone to failure, such as brakes, wipers, clutch, tires, etc. The introduction of car maintenance items and the benefits of regular maintenance are as follows: Car maintenance items: Mainly include replacing fluids and wearing parts. Fluids include engine oil, transmission oil, brake fluid, power steering fluid, coolant, windshield washer fluid, and electrolyte, etc. Wearing parts include belts, wipers, spark plugs, ignition coils, brake pads, brake discs, tires, and filters, etc. Benefits of regular maintenance: Regular car maintenance can improve the performance of the car and extend its service life. According to relevant car maintenance test programs, proper car maintenance can save 11.36% of fuel during driving. After the entire car is maintained, the CO emissions can be reduced by 45.37% when the car is idling.
107
Share

What Does It Mean for a Car to Break Down?

Car breakdown refers to a situation where a vehicle experiences some kind of malfunction while driving on the road, rendering it unable to continue moving. The causes and solutions for car breakdowns are as follows: Causes of Car Breakdown: When coasting in neutral with an automatic transmission, the difference between driving speed and engine speed can easily lead to insufficient oil pressure in the hydraulic lines of the transmission, damaging the friction plates inside the automatic transmission and causing a breakdown; transmission gear skipping; fuel pump wiring burning out, preventing fuel delivery; excessive engine load, accelerating aging; frame deformation or loosening, frame twisting leading to doors not closing properly. Solutions for Car Breakdown: For drivers experiencing a sudden breakdown while driving at high speed, the following solution is common: stay calm, maintain control of the steering wheel, apply intermittent braking to gradually reduce speed, then quickly move to a safe location and call for assistance.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.