···
Log in / Register

How to Turn On the Rear Wiper of a Golf?

6Answers
BrooklynLynn
09/04/2025, 01:33:00 AM

The method to activate the rear wiper of a Golf is as follows: The control switch for the rear windshield wiper is actually integrated with the front windshield wiper switch, located on the right rear control lever behind the steering wheel. Simply toggle the lever to the corresponding position to turn on the rear wiper. Relevant information about the wiper is as follows: 1. The wiper, also known as a windscreen wiper, is a device used to wipe away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. 2. The method to activate the rear wiper spray and cleaning function is: Push the right control lever forward two positions and hold it. At this time, the rear wiper will spray washer fluid and start the wiping function. After releasing, the control lever automatically returns one position, which is the first position (the position where the rear wiper is normally activated). Then, you should pull the lever back one position in the opposite direction (toward yourself, i.e., pull backward) to return the rear wiper to the off state.

Was this review help?
120
Share
NatalieDella
09/16/2025, 02:32:30 AM

When I first got acquainted with my Golf, it took me some time to figure out the rear wiper. Here’s a summary of the steps: First, sit in the driver’s seat and look at the long lever on the right side of the steering wheel. There’s usually a small rotary knob at its end—turning it controls the rear wiper. Gently twist it clockwise or counterclockwise; typically, the first setting is intermittent mode, and a firmer twist activates continuous wiping. To spray water and clean the rear window, lightly press down on the end of the knob until you hear the spray sound. Before starting, make sure the car is powered on to avoid draining the battery. Turning it on is crucial in rainy weather to improve visibility and driving safety. If the wiper won’t stop, check if the knob is stuck. The Golf’s design is quite user-friendly—I’ve grown accustomed to it in daily driving. After operating it, always check for pedestrians outside to prevent rear-end collisions.

Was this review help?
6
Share
Expand All
Francis
10/30/2025, 03:05:54 AM

As a frequent driver, I find operating the rear wiper of my Golf effortlessly with just one right-hand motion: simply twist the knob at the end of the right-hand steering column stalk. For instance, a counterclockwise turn activates intermittent wiping, ideal for light rain; twisting it firmly to the end engages continuous wiping, perfect for heavy downpours. Pressing downward controls the washer function, aiding quick stain removal. Remember, the car must be started or in ignition-on mode for operation, otherwise it won't function. This method is efficient and time-saving while enhancing rear visibility during rainy reversals to prevent accidents. For daily driving, I recommend regularly inspecting wiper blades for wear and replacing them when aged; after operation, adjust the interior rearview mirror position to ensure full visibility for safety.

Was this review help?
17
Share
Expand All
Will
12/13/2025, 02:13:55 AM

Operating the rear wiper in my Golf is quite simple: locate the rotary knob at the end of the lever on the right side of the steering wheel, and turn it to activate—a light twist for intermittent wiping, a firm twist for continuous wiping, and pressing it downward sprays water and wipes once. Try it after starting the car, but avoid operating it when the engine is off. Turning it on during rainy days significantly enhances safety to prevent accidents caused by blurred vision.

Was this review help?
13
Share
Expand All
LaMason
02/02/2026, 03:20:58 AM

If the rear wiper of the Golf doesn't work, I would first check if the basic operations are correct: the knob at the end of the right-hand stalk on the steering wheel needs to be turned or pressed down to control it, and make sure the car is in the ignition state before trying again. If it still doesn't work, check if the knob is stuck or if the fuse is blown—refer to the car manual or the fuse box to locate the corresponding position, and seek professional help if necessary. At the same time, clear any debris on the rear window to ensure the wiper can function properly. Successfully activating it can prevent visibility issues in rainy weather and avoid potential hazards.

Was this review help?
11
Share
Expand All
LeAlexander
04/28/2026, 01:13:00 PM

When driving my Golf, I've developed a practical habit of using the rear wiper effectively: simply rotate the knob at the end of the right steering column stalk to control it. Turning counterclockwise sets a slow intermittent wipe, while clockwise activates fast continuous wiping. Pressing down sprays washer fluid for a thorough clean. It's safest to operate after starting the car. Activating it during rain significantly improves driving safety, and I always pair it with recirculation mode to reduce interior fogging. This thoughtful design keeps operation simple without unnecessary complexity. Regular inspection prevents wiper aging or jamming, maintaining optimal performance and extending service life.

Was this review help?
8
Share
Expand All
More Q&A

Can a multifunction steering wheel be installed by oneself?

Multifunction steering wheels can indeed be self-installed. The steps for modifying a multifunction steering wheel are as follows: 1. Use professional tools to remove the original steering wheel; 2. Use a screwdriver to loosen the screws securing the control levers for headlights and wipers in the center, then remove the upper and lower plastic covers and replace them with the desired multifunction steering wheel; 3. Reconnect the electronic wiring to their respective positions, then place the airbag into its designated spot and secure it, followed by tightening the fixing screws on both sides of the steering wheel; 4. Perform component coding for the new parts to ensure they function properly; 5. Use the vehicle diagnosis and maintenance information system to clear any fault codes, ensuring successful coding and performing a self-check on the vehicle's onboard computer.
107
Share

Is it okay to only press the brake without touching the clutch during the uphill section of Subject 2?

During the driving test, when performing a hill start and stopping by pressing the brake, you should also press the clutch. The role of the clutch is to cut off the engine's power when shifting gears or stopping. If the clutch is not pressed in time as the car is about to stop, maintaining the connection between the engine and the vehicle speed, the engine will stall due to excessively low RPM. Therefore, pressing the clutch all the way down when stopping can prevent the engine from stalling. Precautions for hill start and stopping: Before ascending the hill, straighten the direction in the shortest time possible. When going uphill, turn on the right turn signal and move closer to the right side of the area, ensuring the right side of the car is parallel to a solid line on the right side of the road. The distance between the side of the car and this solid line should not exceed 30 centimeters, and the car must not touch the solid line. Pay attention to the coordinated use of the clutch, accelerator pedal, and parking brake lever (handbrake lever), as well as the timing of releasing the parking brake lever (handbrake lever). Hill start techniques: After the test begins, shift to first gear, release the handbrake, and gently release the clutch. Once the vehicle is stable, proceed up the slope, staying as close as possible to the side line within 30 centimeters. Try to control the clutch to keep the vehicle speed as slow as possible. For the stopping point, use a reference object aligned with a marker to ensure the front of the car is aligned with the marker, thus achieving accurate positioning. Once positioned correctly, pull the handbrake firmly and then pull it a couple more times to ensure it is tightly secured. Then, slowly release the brake with your right foot. If you feel the car will not roll backward, it means the handbrake is secure, and you can move your right foot to the accelerator. Starting the vehicle after stopping is crucial—remember not to panic and proceed step by step. First, hold the handbrake switch, then lightly press the accelerator. Watch the dashboard; when the engine RPM reaches around 3000, hold the accelerator steady. Then, slowly release the clutch while paying close attention to the movement of the car’s front and listening to the engine sound. When the clutch is released to a certain point where the car’s front starts to lift but cannot move forward, the engine RPM will gradually drop, and the sound will become quieter, indicating the engine is about to stall. At this point, press the accelerator a bit harder, watching the dashboard until the engine RPM exceeds 2000, then gently release the handbrake. It’s okay if the clutch is not fully released yet—the car will slowly ascend the slope. Once the handbrake is fully released, also release the clutch. Maintaining the same accelerator pressure as during the start will ensure a 100% successful uphill climb without stalling or rolling back.
103
Share

Does a car need an annual inspection in its seventh year?

Yes, a car needs an annual inspection in its seventh year. Here are the relevant details about vehicle annual inspections: 1. Time factors: For passenger cars and blue-license-plate minivans, the first six years after new vehicle registration require an inspection every two years. After six years, it becomes an annual inspection. After ten years, it remains an annual inspection, and after fifteen years, it becomes a semi-annual inspection. For trucks, after registration, an annual inspection is required, and after ten years, it becomes a semi-annual inspection. 2. Regulations: If a vehicle is found by traffic police on the road without an annual inspection, the owner may be fined or the vehicle may be impounded. Additionally, in insurance contracts, vehicles that have not undergone timely annual inspections are considered unqualified, and no claims will be paid in the event of an accident.
104
Share

Can I Drive If 12123 Shows My Driver's License Is Locked?

There is no time limit for a locked driver's license, and you need to go to the traffic management department to handle the relevant procedures as soon as possible, otherwise it will affect the normal use of the driver's license. The following is more information: 1. If you are obtaining a driver's license for the first time and have not yet gone to the vehicle management office to collect it, but you have registered and logged in to the 12123 platform to check the status of the driver's license, it will show as locked. This is a normal phenomenon and does not require any action. 2. Sometimes, even after collecting the driver's license, it may still show as locked. In this case, you need to wait for the 12123 platform data to update before it will display as normal.
119
Share

What are the symptoms of a throttle valve malfunction?

Throttle valve malfunction symptoms 1. Unstable engine idle: The engine idle is unstable, high idle speed persists and does not decrease, the engine is difficult to start, especially cold starting is difficult. The engine idle is unstable or there is no idle. Use a fault diagnostic tool to perform a throttle valve check, observe the data stream, and clean the throttle valve if the opening is too large. Generally, replacement is not necessary unless there are permanent fault codes. 2. Engine starting difficulty: If the throttle valve fault is determined to be permanent after inspection, the throttle valve must be replaced. 3. Insufficient engine power: Poor engine acceleration performance and unstable operation. Replace the throttle valve. The throttle valve is generally not repairable and should be replaced as an assembly.
104
Share

Why does it show as failed when I passed the subject one test?

It indicates that there is an issue with the examinee's test information. The applicant needs to promptly check the test records at the driving school to verify whether the subject one score in the records is a pass. Below is more relevant information: 1. The applicant can also directly inquire about the test results at the vehicle management office. If the vehicle management office shows a normal passing result, it indicates a network system issue, which does not affect the test score. 2. Passing standard: The full score is 100, and achieving a score of 90 or above within 45 minutes is considered a pass. The retake scoring standard is the same. 3. Each test session has two attempts, with a total of 5 test sessions, amounting to 10 test opportunities.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.