Why does the car fan keep running?

What is the process for the C2 Subject 2 driving test?

After entering the test site, staff in the waiting area will assign you a test vehicle number, and then you will wait for your turn to be called. In the waiting area, scan your ID card again to input your test information. When your number is called, quickly enter through the access channel and find your assigned test vehicle. Once prepared, inform the examiner to begin the test. The candidate will then complete several test items in sequence before driving back to the starting point.

113

Share

How to Deal with Expired Vehicle Inspection?

Vehicles that have not undergone annual inspection on time are not allowed on the road. The vehicle will be penalized with 3 demerit points and a fine. The party involved will bear full or primary responsibility, and the insurance company will not compensate. The vehicle may be impounded. If a motor vehicle fails to obtain an inspection compliance mark for three consecutive inspection periods after the expiration of its inspection validity, it will be subject to mandatory scrapping.

106

Share

How to Drive a LinkTour Qoros 3 Automatic Transmission?

Walk around the vehicle to check if the tires are underinflated or punctured, then insert the key and start the ignition. Release the handbrake and slowly lift your right foot. After the vehicle comes to a stop, press the brake pedal, shift the gear to R (Reverse), release the handbrake, and gradually lift your right foot off the brake pedal to make the car move backward. Upon reaching your destination, park the car in the designated spot, shift the gear to P (Park), engage the handbrake, release the foot brake, turn off the ignition, and remove the key to lock the doors.

110

Share

Which engine is used in the Hyundai Verna?

The engine of the Verna is produced at the engine factory located in Shunyi, Beijing, and is a domestically manufactured engine. The engine model of the Verna is G4FA, with a maximum output power of 73kW, a maximum torque of 132Nm, and a maximum horsepower of 100, paired with a CVT continuously variable transmission. For daily maintenance of the Verna's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.

119

Share

What is the engine model of Dongfeng Peugeot 308?

The 1.2T version of Dongfeng Peugeot 308 has an engine model of EB2DTSM, with a maximum power of 100kW and a maximum horsepower of 136. The 2.0L version has an engine model of BZ2108, with a maximum power of 108kW and a maximum horsepower of 147. The 1.6L version has an engine model of TU5JP4, with a maximum power of 78kW and a maximum horsepower of 106. The engine of Dongfeng Peugeot 308 is produced by Yantai Dongyue Power Company and is a domestically manufactured engine. For daily maintenance of the Dongfeng Peugeot 308 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When engine oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

103

Share

What causes the hissing sound when the car AC is turned on?

The reasons for the hissing sound when the car AC is turned on include: belt slippage, AC compressor failure, or foreign objects in the air duct. Here are the solutions: 1. Belt slippage: The AC compressor is driven by the engine crankshaft via a belt. If the belt becomes loose, aged, severely worn, or if the tensioner lacks sufficient tension, it can cause belt slippage, resulting in a hissing noise. Solution: If the issue is due to the belt, simply replace the belt. If it's a tensioner problem, replace the tensioner. 2. AC compressor failure: When the AC switch is turned on, the compressor starts operating. If the compressor is damaged, it may produce a hissing sound. In this case, it's recommended to visit a 4S shop for replacement or repair. 3. Foreign objects in the air duct: If there are foreign objects in the AC system's air duct, they may rotate with the blower's airflow and repeatedly hit the air filter, causing a hissing noise. To resolve this, remove the AC filter and carefully inspect and clean any foreign objects in the air duct.

111

Share

Why does the car fan keep running?

What is the process for the C2 Subject 2 driving test?

How to Deal with Expired Vehicle Inspection?

How to Drive a LinkTour Qoros 3 Automatic Transmission?

Which engine is used in the Hyundai Verna?

What is the engine model of Dongfeng Peugeot 308?

What causes the hissing sound when the car AC is turned on?

What are the penalties for overdue vehicle inspection and how to handle it?

What to Do When a Tire Bursts on the Highway?

How to Observe Reference Points for Reversing into the Garage in Subject 2?

How to Submit Physical Condition Certificate for Driver's License?