···
Log in / Register

What is the battery model for the imported Ford Edge?

6Answers
MacSamuel
07/28/2025, 11:58:35 PM

The battery model for the imported Ford Edge is GS56620. The functions of the battery are: 1. To supply power to the starting system, ignition system, electronic fuel injection system, and vehicle electrical components when starting the engine; 2. To provide power to the vehicle's electrical equipment when the engine is off or idling at low speed; 3. The battery acts as a voltage stabilizer for the entire vehicle's electrical system; 4. The battery stores excess electricity generated by the alternator. Taking the 2012 imported Ford Edge Limited as an example, its body dimensions are: length 4699mm, width 1930mm, height 1705mm, with a wheelbase of 2825mm. The 2012 imported Ford Edge Limited features front-wheel drive, with a MacPherson strut front suspension and a multi-link independent rear suspension.

Was this review help?
101
Share
OLogan
08/12/2025, 11:31:44 AM

As a long-term owner of a Ford imported Edge, I can tell you that its battery model is usually the 96R size or H8 standard, with a capacity of around 70 ampere-hours and a cold cranking current of approximately 760 amperes. I've personally experienced battery aging issues, especially on cold winter mornings when the car wouldn't start. It's recommended that owners use a multimeter to test the voltage every two to three years; maintaining it above 12.6V is normal. If it's too low, you should replace it immediately. The common size is 315x175x190 mm, and it's easy to buy at auto parts stores. Don't opt for cheap, low-quality brands—safety is very important.

Was this review help?
11
Share
Expand All
NoraLee
10/02/2025, 04:09:45 AM

I've been driving since I was young, and experience tells me that the Ford Edge imported models mostly use 95R/H8-type batteries, with a 70 ampere-hour capacity at 12 volts, which can be considered reliable and durable. I still remember last winter when the battery suddenly failed, and I had to get a tow truck rescue before replacing it with an original factory model. The process was simple but cost a few hundred dollars. Car owners should pay attention to seasonal changes and have regular check-ups at 4S shops. When choosing a battery, don't just look at the price; consider the warranty period and performance match, and ensure the size standard is easy to install.

Was this review help?
1
Share
Expand All
OAmir
11/15/2025, 10:05:22 PM

I have some knowledge about automotive electrical systems. The battery model for the imported Ford Edge is generally the H8 size, corresponding to a 12V system and 70Ah capacity. The design ensures a stable cold cranking current of 760CCA, which is crucial for daily driving, especially in low-temperature environments to reduce failure rates. It is recommended that owners check the original factory specifications when replacing the battery and avoid choosing other models randomly.

Was this review help?
10
Share
Expand All
AlexandraDella
01/05/2026, 11:42:07 PM

As a female driver, I usually drive a Ford imported Edge, which has a 96R-sized battery with a capacity of around 70 ampere-hours. Every time I go for maintenance, the technician emphasizes the importance of regularly checking the fluid level and cleaning the terminals. If you're not familiar with these tasks, it's recommended to have a professional inspection every six months. The standard size makes replacement easy; don't ignore minor issues like delayed ignition, as they could be signs of battery aging. Safety comes first.

Was this review help?
3
Share
Expand All
DelMaggie
04/02/2026, 11:12:45 PM

As a Hyundai owner who enjoys tinkering with cars, I've found that the Ford Edge import model commonly uses an H8/95R specification battery with 70Ah capacity. I've tried purchasing replacements online at affordable prices, but it's crucial to verify the exact dimensions. While upgrading to an AGM battery might offer better durability, the original factory model is sufficient. Remember to regularly test the voltage to avoid surprises. The dimensions of 315x175x190mm ensure easy compatibility with various brands.

Was this review help?
17
Share
Expand All
More Q&A

Can you cross a solid white line with a dashed line?

You cannot cross a solid white line with a dashed line. A solid white line prohibits crossing and is often used as an extension of a dashed white line before intersections. It works in conjunction with traffic guidance signs at intersections to separate straight-moving vehicles from left or right-turning vehicles, preventing straight-moving vehicles from interfering with turning vehicles. Below are the reasons for delays in clearing penalty records: System delays in traffic violation query platforms: Violations go through a process from occurrence to being captured, confirmed, and publicized. Similarly, handling penalty points and paying fines also involves a process. Use of third-party proxy services: With the rapid development of smartphones, various apps and public accounts for handling violations have emerged. The time taken to process violations varies depending on the channels used by each proxy service to clear violations.
119
Share

What are the methods for repairing a dented car door?

The methods for repairing a dented car door are: 1. You can use a bridge-type suction rod, which can adhere to the adhesive pad attached by the car owner, then continuously turn the screw nut until the dent is pulled out and leveled, ensuring more even force distribution; 2. Take it to a professional repair shop for light sheet metal work, where a suction cup is used to pull out the dent, followed by inserting a hook behind the dented area to slowly push it out, and finally using a rubber hammer to treat the protruding parts. It is recommended to leave body dent issues to professionals to avoid causing more problems due to personal or equipment factors.
116
Share

What inspections should be done for a 100,000-kilometer major maintenance?

For a 100,000-kilometer major maintenance, the following items should be replaced: engine oil, engine oil filter, transmission fluid, fuel filter, spark plugs, air filter, cabin air filter, brake pads, brake discs, brake fluid, and coolant. Definition of car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Scope of car maintenance: Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance areas.
103
Share

Do exempted vehicles still need to go to the DMV?

Exempted vehicles need to go to the DMV. Conditions for exempted vehicles: There are many brands and models of exempted vehicles. Whether a vehicle is exempted is determined by the "Announcement of Road Motor Vehicle Manufacturers and Products" periodically released by the Ministry of Industry and Information Technology, based on whether there is an exemption record. Exemption list: In this list, many popular models currently on the market are included. Among them are FAW-Volkswagen's Golf 1.6, Bora 1.6, 1.8, and 1.8T models, as well as Shanghai Volkswagen's Passat and Polo sedans. Additionally, five BMW models from Brilliance BMW, including the 530I, are also on the list.
112
Share

How to Remove the Steering Wheel of a Chery Fengyun 2?

First, straighten the steering wheel of the Chery Fengyun 2 vehicle, then use a screwdriver to remove the screw on the left side of the steering wheel. Next, remove the screw on the right side of the Chery Fengyun 2 vehicle's steering wheel. Then, remove the screw underneath the steering wheel of the Chery Fengyun 2 vehicle. After that, unclip the wire harness fastener of the Chery Fengyun 2 vehicle. Then, remove the horn grounding wire inside the steering wheel of the Chery Fengyun 2 vehicle. Next, use a screwdriver to pry open the yellow locking buckle of the Chery Fengyun 2 vehicle's steering wheel. Finally, use a tool to release the locking buckle of the airbag on the steering wheel of the Chery Fengyun 2 vehicle.
105
Share

Can I deregister and scrap a motorcycle without bringing it in?

Motorcycle deregistration and scrapping cannot be done without bringing the motorcycle in. If a motorcycle has reached its scrapping age, deregistration must be processed; otherwise, the owner cannot participate in the small passenger vehicle license plate lottery. Relevant regulations: According to relevant regulations, if an individual has a motor vehicle (including a motorcycle) that should be scrapped but has not completed the deregistration process, that individual cannot register a new vehicle and is therefore ineligible to participate in the small passenger vehicle license plate lottery. Notes on motorcycle deregistration: The owner of a scrapped motorcycle should, within 7 days after handing over the motorcycle for scrapping, present the relevant proof to the public security traffic management department to complete the deregistration process. The vehicle owner must hand over the motorcycle to a recycling enterprise before the scrapping deadline.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.