···
Log in / Register

How to Drive a LinkTour Qoros 3 Automatic Transmission?

5Answers
DiConnor
07/28/2025, 11:58:41 PM

Walk around the vehicle to check if the tires are underinflated or punctured, then insert the key and start the ignition. Release the handbrake and slowly lift your right foot. After the vehicle comes to a stop, press the brake pedal, shift the gear to R (Reverse), release the handbrake, and gradually lift your right foot off the brake pedal to make the car move backward. Upon reaching your destination, park the car in the designated spot, shift the gear to P (Park), engage the handbrake, release the foot brake, turn off the ignition, and remove the key to lock the doors.

Was this review help?
110
Share
Ross
08/12/2025, 11:33:16 AM

When I first learned to drive, I rented a Qoros 3 automatic transmission from Lian Dong Yun, and it felt quite simple. Before getting in the car, I made sure the doors were unlocked using the APP. After sitting in the driver's seat, I adjusted the seat and rearview mirror positions, pressed the brake pedal, and turned the key or pressed the start button to ignite the engine. Then, with my right hand, I shifted the gear lever to the D position (drive mode), gently released the brake, and slowly pressed the accelerator to get the car moving. During driving, the automatic transmission made shifting gears effortless—I mainly focused on controlling the speed according to road conditions, coordinating between the brake and accelerator. When parking, I first slowed down to a smooth stop, shifted to P (park mode), pulled up the handbrake, turned off the engine, and finally remembered to click 'End Rental' and lock the doors on the APP. Lian Dong Yun's interface is quite user-friendly, making it easy for beginners to get started.

Was this review help?
4
Share
Expand All
LaLuna
10/02/2025, 04:09:53 AM

I often use Lian Dong Yun's Qoros 3 automatic transmission for commuting, and the operation steps are quite straightforward: first, book the vehicle through the mobile app and scan the QR code to unlock the door, then sit in the driver's seat, press the brake pedal to confirm starting the engine, and finally shift the gear lever to D to drive forward. When driving in the city, maintain the speed within the limit, use the rearview mirror to observe road conditions, and avoid sudden braking to save power. When returning the car, park steadily, shift to P, engage the handbrake, and turn off the engine, then complete the payment and lock the car through the app. Shared cars may have been used by others, so it's advisable to quickly check the tires and lights before starting.

Was this review help?
13
Share
Expand All
CharlesMarie
05/09/2026, 04:30:41 AM

Safety is the top priority when driving this car: Before starting, check the brake pedal's responsiveness, ensure you're seated properly, start the engine, and confirm the gear is in D before driving. Always observe the rearview mirrors and blind spots on the road, maintain a safe distance from the vehicle ahead, and pay extra attention to the car's condition when using Lian Dongyun car rental services as they are frequently used by many people. After parking, shift to P gear, engage the handbrake to prevent any movement, and finally return the car via the APP.

Was this review help?
19
Share
Expand All
VanEmery
05/10/2026, 11:07:00 PM

The automatic transmission Qoros 3 delivers efficient driving: start the engine by pressing the brake, select D gear for driving, and enjoy smooth acceleration; city driving with controlled speed saves fuel and electricity. The LinkTour APP assists with quick start and return, use P gear to park and turn off the engine, don't forget to lock the doors for a great sharing experience.

Was this review help?
18
Share
Expand All
More Q&A

What causes the BYD F3 to sometimes stall automatically?

Here are the reasons why the BYD F3 sometimes stalls automatically: 1. Intake pipe: Vacuum leakage in the intake pipe. 2. Idle speed: Unstable idle speed caused by improper idle adjustment, dirty throttle body, poor idle control system performance, etc. 3. Fuel pressure: Unstable fuel pressure, such as excessive wear or poor contact of the electric fuel pump brush, or clogged fuel pump filter screen. 4. Ignition system: Poor performance of the ignition system. For example, high-voltage sparks, spark plugs used for too long, incorrect ignition timing, poor contact of the ignition coil or inter-turn short circuit in the hot state resulting in no high-voltage spark or weak high-voltage spark, poor contact of the low-voltage line, damaged insulation adhesive intermittently grounding, poor grounding.
104
Share

Should I use turn signals when changing lanes on a dashed line?

You should use turn signals when changing lanes on a dashed line. Turn signals are required whenever you intend to change lanes. Additional information: 1. It's a violation: Changing lanes without using turn signals is considered a traffic violation. Failing to use turn signals when changing lanes is categorized as improper use of vehicle lights, which may result in a fine and 1 penalty point. 2. Left turn signal: You should activate the left turn signal in advance when making a left turn, changing to the left lane, preparing to overtake, leaving a parking spot, or making a U-turn. 3. Right turn signal: You should activate the right turn signal in advance when making a right turn, changing to the right lane, returning to the original lane after overtaking, or pulling over to park.
110
Share

When reversing, which way does the car body move when the steering wheel is turned to the left?

When reversing, turning the steering wheel to the left makes the front of the car move to the right. If you need to adjust the rear of the car to the left, turn the steering wheel to the left; to adjust the rear to the right, turn the steering wheel to the right. Extended content: If the entire car body is leaning to the left, adjusting the car body can be divided into two situations: 1. When the car is moving forward: Using the front of the car as a reference, if the front is leaning to the left, it means the right side is wider. Turn the steering wheel to the right and straighten it when the car body is about to align with the markings on both sides. 2. When the car is moving backward: Using the rear of the car as a reference, if the rear is leaning to the right, it means the left side is wider. Turn the steering wheel to the left and straighten it when the car body is about to align with the markings on both sides.
111
Share

What is the function of the RES button on the steering wheel?

There are two functions of the RES button on the car steering wheel. One is for acceleration after setting the cruise control, and the other is to press RES to restore the previously set speed after temporarily canceling the cruise control. The following is a related introduction about the steering wheel: 1. Introduction to the steering wheel: It is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. 2. Function of the steering wheel: The steering wheel is generally connected to the steering shaft through splines, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. When turning with a larger diameter steering wheel, the hand force required by the driver can be smaller. The steering transmission shaft serves as a connecting piece between the steering gear and the steering shaft, which is beneficial for the generalization of the steering gear, compensates for errors caused during manufacturing and installation, and makes the installation of the steering gear and steering wheel on the vehicle more reasonable.
101
Share

What Toyota model is gtm7152ccm?

The Toyota gtm7152cm model is the Yaris L equipped with a 1.5L naturally aspirated engine. Additional information: 1. Exterior: The new Yaris L maintains its original oversized body dimensions and bold front grille design. With the goal of "enhancing distinctive image and iconic appearance", it features China-market exclusive redesigned bumpers, headlight clusters with added daytime running lights, and modified taillight layouts with LED light sources that also reduce energy consumption. 2. Safety features: Building upon the existing ABS+BA (Anti-lock Braking System/Brake Assist), the new Yaris L adds VSC (Vehicle Stability Control) and TRC (Traction Control) systems. These systems constantly monitor all four wheels, selectively braking wheels slipping on wet/snowy surfaces while limiting engine output to ensure directional stability and prevent skidding or loss of control.
107
Share

Can a Sedan Carry 1000 Jin of Cargo?

Generally, the load capacity of a family sedan ranges from 375 to 500 KG. There is no precise calculation method, and the load capacity should be based on the weight indicated on the nameplate hung when the car leaves the factory. The national standard is 375 kilograms, which means the load capacity of the produced car cannot exceed 375 kilograms. Below is additional information: Relevant regulations: Article 54 of the "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China" stipulates that the load of a motor vehicle must not exceed the load capacity approved on the vehicle's driving license, and the loading length and width must not exceed the dimensions of the vehicle compartment. The following regulations should also be observed: For heavy and medium-duty trucks and semi-trailers, the height of the load from the ground must not exceed 4 meters, and for vehicles carrying containers, the height must not exceed 4.2 meters. For other motor vehicles carrying goods, the height from the ground must not exceed 2.5 meters.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.