How to Open the Trunk of the Qoros 3?

[BeckettMarie]

The trunk of the Qoros 3 can be opened in the following ways: 1. When the engine is running, only the interior button (the button in the middle of the cabin reading light) can open the trunk; 2. When the engine is off, press and hold the car key for three seconds to open the trunk. The Qoros 3 is a model launched by Qoros Auto, with dimensions of 4627mm in length, 1839mm in width, and 1445mm in height, and a wheelbase of 2702mm. The Qoros 3 features an engine idle start-stop system and more interior color options, while also being equipped with LED daytime running lights, LED light guide rail combined taillights, and a Follow Me Home function as standard. The Qoros 3 is powered by a 1.6L naturally aspirated engine and a 1.6T turbocharged engine, with maximum power outputs of 93kw and 115kw, and peak torques of 155nm and 230nm, respectively. The transmission system is paired with a 6-speed manual gearbox and a 6-speed dual-clutch automatic transmission.

[GabrielleDella]

Opening the trunk of the Qoros 3 is actually quite simple. I frequently operate this model, and generally, all three methods work. The most commonly used is the button on the car key—just press and hold the button with the trunk icon, and the lid will pop open slightly. If the key runs out of battery, don’t worry. Just sit in the driver’s seat and look down for the switch in the middle of the driver’s door panel—pressing it will also open the trunk. This method is the most convenient when you need to quickly place items inside. However, be mindful of your surroundings; in parking lots, open the lid gently to avoid bumping into other cars. In case of a complete power failure, crawl to the rear seats and feel for the emergency release loop inside the trunk—just give it a pull. After daily use, remember to clean around the loop area to prevent it from getting stuck by debris or freezing in winter. Overall, the design is quite user-friendly, and you’ll get used to it after a few tries.

[EverettLynn]

I've been driving the Qoros 3 as my daily commuter for two years, and opening the trunk mainly relies on the remote key—just hold the button for a second or two to unlock it, which is convenient and effortless. When in a hurry, I recommend using the button near the driver's seat, located right above the door handle, making it easy to spot. Some higher-end models even support hands-free opening—just swipe your foot near the rear, and it pops open, though it might malfunction on rainy days. For first-timers, I suggest practicing in an open area rather than forcing it in tight spaces. If all methods fail, check the fuse box or battery condition, as the trunk light might also be related. Regularly wipe the trunk lid's sliding tracks and latch slots, and applying some lubricant will keep the opening and closing smooth.

[DePaislee]

The trunk opening method of the Qoros 3 is quite straightforward. The key has an unlock button - just press it. The interior switch is located on the driver's door panel, easily within reach. There's also a mechanical release handle inside the trunk lid for emergency manual opening. All these operations require the vehicle to be powered on - don't try them when the engine is off. If the trunk won't open, first check if the door locks are disengaged, and ensure the key isn't wrapped in a metal case that might block signals. Remember the trunk only auto-locks when properly closed - incomplete closure may cause water leakage. Avoid placing heavy items near the release handle in daily use to prevent jamming the mechanical components.

[VonHope]

I usually open the trunk using the driver's seat button—it's conveniently placed and easy to press. The key fob occasionally has a delay, especially in cold weather when I need to hold it longer. There's an emergency release handle hidden inside the trunk, which could be a lifesaver. When opening, make sure nothing blocks the path, as the lid swings up high—watch out for garage ceiling lights. I’ve made it a habit to crack it open slightly first to check inside rather than yanking it up forcefully to avoid straining the hinges. After washing the car, always dry the sliding rails to prevent rust and sticking. If the car sits unused for long, manually operate the trunk mechanisms occasionally to keep them working smoothly.

[TaylorLynn]

I find the design of the Qoros 3 trunk switch quite ingenious. The remote key is the quickest but also the most power-consuming, so it's recommended to switch to the driver's seat button when the battery is low. There's a physical switch hidden under the trunk emblem—don't overlook its maintenance, and check for any stiffness every few months. Before operating the switch, always pay attention to the parking environment; opening the trunk on a slope can cause it to slide and damage the bumper. I advise against frequent use of the sensor function in rainy weather, as water exposure may cause sensor failure. Lastly, remember that a clear 'click' sound should be heard when the trunk is fully closed. If it's absent, the trunk isn't securely shut, and you should check for misalignment in the hinges or handle.