···
Log in / Register

Which Lights Should Be Turned On When Driving?

6Answers
DiSarah
08/26/2025, 10:40:30 PM

According to regulations, turn signals must be activated when starting the car to alert following vehicles to slow down and yield. Use the right turn signal when parking. Additionally, headlights should be turned on when starting at night, while parking lights or width markers should be used when waiting. Fog lights must be activated in foggy conditions. Turn Signals: These lights are used to indicate turning and lane changes to other road users, as well as hazard lights (to alert pedestrians and vehicles for safety) in emergency situations. Headlights: Primarily used for nighttime driving, headlights are divided into high beams and low beams and are mandatory for night driving. Switch between high and low beams when overtaking, and use low beams during oncoming traffic to ensure responsible and courteous headlight usage for the safety of others and yourself. Parking Lights/Width Markers: Parking lights serve a similar function to daytime running lights, but the former are used in low-visibility conditions such as nighttime or rainy/foggy weather. Positioned at the four corners of the vehicle, parking lights make it easier for others to discern the vehicle's outline, enhancing driving safety. Fog Lights: Due to their high penetration, fog lights improve the vehicle's visibility to oncoming traffic, allowing others to take evasive action for safer driving. Remember to turn off fog lights after parking to prevent damage.

Was this review help?
107
Share
CorbinDella
09/08/2025, 05:21:51 AM

I've been driving for twenty years, and using lights properly is key. On normal roads, use daytime running lights during the day to save power and stay visible; when it gets dark or on cloudy/rainy days, always turn on low beams to ensure you can see ahead and avoid collisions. On highways at night, high beams provide better long-range visibility, but switch to low beams immediately when facing oncoming traffic. Always signal with turn indicators well before turning to alert others. In heavy fog, use front fog lights to enhance visibility. Remembering these details can prevent many accidents—I’ve personally seen rear-end collisions caused by beginners forgetting to turn on lights. Many cars now have automatic lighting, but manually confirming adds peace of mind. Making it a habit significantly improves safety.

Was this review help?
10
Share
Expand All
SanJoy
10/22/2025, 10:41:18 PM

When I first started learning to drive, my instructor always nagged about turning on the lights. For example, during daytime commutes, not turning on the headlights isn't a big deal; but when it's dark in the morning or evening, or when entering a tunnel, you must turn on the low beams. At night, use low beams throughout the journey, and high beams only briefly in uninhabited suburban areas. In heavy rain or thick fog, turn on the dedicated fog lights. Always signal for a few seconds before making a turn. Safety is paramount—not using these lights doubles the risk of accidents. My friend once scraped another car because he forgot to signal, costing him a thousand bucks in repairs. Since then, he's learned his lesson and checks every time.

Was this review help?
11
Share
Expand All
AngeloLee
12/05/2025, 10:04:43 PM

Car lighting is no small matter! For daily driving, use low beams as the main light source at night, covering a range of 50 meters; high beams are for supplementary lighting in open areas but must be dimmed for pedestrians and other vehicles; turn signals should be activated before turning or changing lanes; daytime running lights save energy and turn on automatically; fog lights enhance brightness in low visibility conditions. Nowadays, I'm researching LED lights, which are more efficient, have a longer lifespan, and consume less power. These technological designs make driving safer and more convenient, and maintaining proper lighting is a key maintenance point.

Was this review help?
7
Share
Expand All
Cathy
01/25/2026, 11:22:12 PM

Traffic regulations clearly stipulate that headlights must be used while driving: low beams are mandatory at night, in tunnels, and during rainy or foggy conditions; high beams are prohibited in urban areas to avoid glare; fog lights should be activated when necessary; turn signals must be used in advance and maintained. Violations may result in penalty points and fines—I remember being warned by traffic police once for not turning on my lights during heavy rain. Compliance is not only legal but also protects yourself, making pre-drive light checks essential.

Was this review help?
11
Share
Expand All
ORemington
04/21/2026, 04:48:59 AM

From a practical perspective, driving with proper lighting is simple and efficient: no need to manually turn on lights during the day as daytime running lights suffice; use low beams at night for primary illumination; activate front and rear fog lights in rain, fog, or haze; signal turns by engaging indicators 3 seconds before maneuvering. These basic actions maintain proper lighting, which can reduce accident repair costs and extend battery life. I now routinely check bulbs and circuits to ensure everything functions correctly.

Was this review help?
7
Share
Expand All
More Q&A

Can Auto Start-Stop Use a Regular Battery?

Auto start-stop systems cannot use regular batteries as they are incompatible with the vehicle. All components in a car are interconnected, and the auto start-stop feature relies on the power management system. If a regular battery is used instead of an auto start-stop battery, the power management system will detect the mismatch and trigger an error, preventing the car from starting. This configuration cannot be altered. During each engine start, the battery supplies power for ignition, which is why auto start-stop batteries require larger capacity. These batteries use absorbent glass mat (AGM) technology, enabling them to support repeated high-current discharges in short intervals while delivering more power and lasting longer. Using a regular battery in this scenario would rapidly degrade its lifespan due to the frequent charge-discharge cycles, necessitating premature replacement.
107
Share

What is the cargo space volume of the Wuling Hongguang S3?

The cargo space volume of the Wuling Hongguang S3 is as follows: its body dimensions are 4655mm in length, 1735mm in width, and 1780mm in height, with a wheelbase of 2800mm. The third-row seats of this vehicle support a 4:6 split-folding function. The trunk height is 870mm, width is 1220mm, and depth is 2010mm, providing a trunk volume of 1207 liters. The trunk cover is 1830mm from the ground, and the trunk itself is 760mm from the ground. The Wuling Hongguang S3 is a compact SUV. In terms of power, it is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum power of 108 kW and a maximum torque of 250 Nm, paired with a 6-speed manual transmission.
114
Share

Does the Renault Kadjar have many faults?

Faults of the Renault Kadjar include water ingress in headlights, engine vibration, and entertainment system malfunctions. Below are the detailed specifications of the Renault Kadjar: 1. Vehicle Positioning: The Renault Kadjar is a compact SUV domestically produced by Dongfeng Renault. The dimensions of the Kadjar are 4508 1836 1610mm. 2. Powertrain: It is equipped with two powertrain options: a 1.2-liter turbocharged engine and a 2.0-liter naturally aspirated engine. The 1.2-liter model delivers a maximum horsepower of 117 hp, a maximum power of 86 kW, and a maximum torque of 190 N·m. The 2.0-liter model offers a maximum horsepower of 154 hp, a maximum power of 113 kW, and a maximum torque of 196 N·m. Transmission options include a 6-speed manual and a CVT continuously variable transmission.
116
Share

Procedure for Adding a Class E License

Taking Shanghai as an example, the specific procedure for adding a Class E license to a C1 driver's license is as follows: 1. Apply for the addition of a permitted driving category: The applicant should bring the required materials to a local motor vehicle driver training institution to register. The training institution will then handle the addition of the permitted driving category at the vehicle management office in the respective jurisdiction. 2. Complete the subject tests within the validity period: After passing the subject one test, the vehicle management office will issue a 'Learning to Drive Certificate' (valid for three years) within one working day. The applicant must complete subject two and subject three tests within the validity period. If the tests are not completed within the validity period, the passed subjects will be invalidated. 3. Receiving the motor vehicle driver's license: After passing subject one, subject two, and subject three tests in sequence, the vehicle management office will produce the motor vehicle driver's license within one working day. The applicant will then receive education on traffic safety, civilized driving common sense, and case studies of traffic accidents, participate in a pre-license oath ceremony, and finally receive the motor vehicle driver's license.
120
Share

Does the Lincoln Navigator have an extended version?

Lincoln Navigator does have an extended version. The Navigator is a large SUV model under the Lincoln brand, equipped with a 3.5-liter twin-turbocharged engine that delivers a maximum power of 285 kW and a maximum torque of 680 Nm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block, paired with a 10-speed automatic transmission. The dimensions of the Navigator are 5350mm in length, 2073mm in width, and 1937mm in height, with a wheelbase of 3330mm. The vehicle comes with an all-wheel-drive system that uses a multi-plate clutch-type center differential. The front suspension employs a double-wishbone independent suspension, while the rear suspension uses a multi-link independent suspension.
112
Share

Are Run-Flat Tires Inner Tubes?

Run-flat tires are not inner tubes. They consist of an outer tire, a standard inner tube, a spare inner tube, a steel rim, a gas generator, a pressure sensor, and a control unit. Special symbols are marked after the tire sidewall specifications, which are absent on regular tires. The structure of run-flat tires is largely similar to that of regular tires, but their sidewalls are significantly thicker. When inflated, the sidewalls bear the main load of the vehicle's weight. Run-flat tires used in cars do not mean the tires won't puncture; rather, they prevent severe vehicle tilting in case of a puncture. A sudden shift in the center of gravity during a puncture can cause loss of control. Due to their thicker sidewalls, run-flat tires offer better support and resilience, allowing the vehicle to continue driving for a certain distance even when leaking air.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.