···
Log in / Register

Which car brand has a logo with two dragons?

6Answers
StDominic
08/27/2025, 10:52:28 PM

The logo with two dragons belongs to Roewe, a sub-brand under SAIC Motor. The models under Roewe include: Roewe i5, Roewe i6, Roewe i6 New Energy, Roewe RER6, Roewe Ei5, Roewe RX3, Roewe RX5, Roewe RX5 MAX, Roewe RX8, Roewe RX5 MAX New Energy, and Roewe RX5 New Energy. Taking the 2021 Roewe i5 Manual Platinum Edition as an example: it is a compact car launched by SAIC Motor, with a length, width, and height of 4607mm, 1818mm, and 1489mm respectively, and a wheelbase of 2680mm. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 88kw, and matched with a 5-speed manual transmission.

Was this review help?
119
Share
RosalieDella
09/09/2025, 04:14:00 AM

I recently noticed while researching car logos that many people ask about the brand with two dragons in its emblem. Actually, that's the logo of Baojun, designed as two soaring dragon-horses, symbolizing speed and power, representing traditional Chinese culture. Baojun is a Chinese brand jointly established by SAIC Motor and General Motors. They mainly offer cost-effective SUVs and sedans, with models like the Baojun 510 being popular for their affordable prices and spacious interiors. This logo incorporates dragon elements, making it quite visually striking and distinctly imbued with local cultural vibes. I often see these cars on the streets, especially in second and third-tier cities, making them a practical choice for family vehicles.

Was this review help?
13
Share
Expand All
StAshlyn
10/23/2025, 10:18:01 PM

As an ordinary driver, I was also quite curious when I first saw the double dragon emblem. After checking, I found it belongs to Baojun Auto. Established in 2010, Baojun is a sub-brand of SAIC-GM-Wuling, and its logo design incorporates the imagery of a galloping dragon-horse, symbolizing an enterprising spirit. I think this design is very down-to-earth, combining the mystique of the Chinese dragon with a modern touch. Baojun cars, such as the 530 series, are quite common in the market, known for their stable and reliable performance. They offer a smooth driving experience, making them suitable for daily commutes.

Was this review help?
15
Share
Expand All
DelJackson
12/06/2025, 09:41:52 PM

From my years of driving experience, those two dragon emblems are exclusive to the Baojun brand. Baojun models offer great value for money, with the twin-dragon logo representing Chinese elements, and the vehicles emphasize practicality. Their 510 series is the entry-level SUV I'd recommend, with adequate power and affordable maintenance. Just look for that dynamic dragon-horse design on the front grille for identification.

Was this review help?
10
Share
Expand All
IanDella
01/26/2026, 10:57:03 PM

As an automotive enthusiast, I find Baojun's twin dragon emblem quite distinctive. Compared to other brands like Geely or Chery, Baojun emphasizes more on local mythological themes. The logo design is simple yet powerful, embodying speed and innovation. Models like the Baojun RS-5 equipped with intelligent systems offer a decent driving experience. Overall, it reflects the characteristics of China's automotive industry.

Was this review help?
8
Share
Expand All
KennedyLee
04/22/2026, 04:08:19 AM

When focusing on automotive safety, I learned that the two-dragon emblem is the symbol of Baojun. Baojun models like the 730 perform well in safety tests and are highly reliable. This emblem conveys an image of solidity and vitality, with design inspiration drawn from traditional culture. The vehicles exhibit high durability in daily use, making them suitable for both family and business purposes.

Was this review help?
8
Share
Expand All
More Q&A

can two people sign car title in nj

Yes, two people can sign a car title in New Jersey, but the method of signing is critical and depends on how the owners' names are listed on the title. The New Jersey Motor Vehicle Commission (NJMVC) treats titles with multiple owners based on the conjunction used between the names: "AND" or "OR" . If the names are connected by "AND" (e.g., John Doe AND Jane Doe), it means you are co-owners. In this case, both individuals must sign the title to legally transfer ownership to a buyer. This is a strict requirement. If only one person signs, the NJMVC will not accept the title for transfer, and the sale cannot be completed. If the names are connected by "OR" (e.g., John Doe OR Jane Doe), either owner has the full legal authority to sell the vehicle and sign the title independently. The signature of just one owner is sufficient for a valid transfer. The most common scenario for two signers is when selling a car that is jointly owned ("AND"). Both parties must be present to sign the title in the presence of a notary public, as New Jersey requires all signatures on a title to be notarized. You will also need to complete the odometer disclosure statement and provide the vehicle's title and registration to the buyer. Scenario Names on Title Signatures Required NJMVC Acceptance Joint Ownership Owner A AND Owner B Both Owner A and Owner B Only if both sign Individual Ownership Owner A OR Owner B Either Owner A or Owner B Yes, with one signature Incorrect Procedure Owner A AND Owner B Only Owner A Rejected Before proceeding, always check the title carefully to see how the names are listed. Using the wrong signing procedure will cause significant delays and require you to obtain a duplicate title, which is an unnecessary hassle.
114
Share

can u get a new car key without fob

Yes, you can absolutely get a new car key without the original key fob. The process involves a locksmith or dealership using your car's VIN (Vehicle Identification Number) to cut a new key blade. However, for most modern cars, the key itself is only part of the solution. The critical component is the electronic transponder chip inside the key fob, which communicates with your car's immobilizer system. Without programming this chip, a new key will turn the lock but will not start the engine. The feasibility and cost depend heavily on your car's age and technology. Here’s a breakdown of common scenarios: Car Type / Scenario Key Type Required Primary Method Estimated Cost Range Key Consideration Pre-1990s Vehicle Traditional Metal Key Locksmith can cut a key by code using the VIN. $50 - $100 Simple mechanical process; no electronics involved. 1990s - Mid-2000s Key with Transponder Chip Locksmith or dealer must program a new chip to the car's ECU. $150 - $300 Requires specialized programming equipment; proof of ownership is mandatory. Modern Push-to-Start Key Fob with Integrated Transmitter Dealership is often the only option for full system programming. $200 - $600+ The most complex process; may require replacing the entire keyless entry module. After a Theft New Key & Fob Dealer visit is strongly recommended to delete old keys from the system. $400 - $800+ Critical for security to prevent the stolen key from being used. For any car with an immobilizer system (virtually all cars from the mid-90s onward), simply cutting a new key is insufficient. A professional must program the new key's unique digital signature into the car's computer. This is a security feature to prevent theft. Your best course of action is to call a reputable automotive locksmith. They are typically more affordable than a dealership and can often perform the service mobilely. Have your vehicle's VIN, your driver's license, and proof of ownership (like your car's registration) ready, as these are required to prevent unauthorized key duplication. While a dealership is a guaranteed solution, it is usually the most expensive and time-consuming option.
104
Share

can no oil stop a car from starting

No, a lack of engine oil will not typically prevent your car's engine from starting. The engine can crank and even run briefly without oil. However, starting a car with no oil causes catastrophic damage within seconds. The real question isn't about starting; it's about the severe and immediate internal damage that occurs once it does start. The starting process relies on the battery, starter motor, and fuel system. Engine oil's primary role is lubrication, not ignition. But oil is the lifeblood of your engine. Without it, metal components like pistons, crankshafts, and camshafts rub together at high speeds with no protective barrier. This creates intense friction, generating extreme heat and causing parts to weld together or seize, which is what ultimately stops the engine—permanently. Here’s a breakdown of the potential damage timeline and costs if you start an engine with no oil: Component at Risk Type of Damage Typical Repair Cost (USD) Time Until Failure After Start Crankshaft & Bearings Scoring, seizure $3,000 - $7,000+ 15-30 seconds Piston Rings & Cylinder Walls Scuffing, scoring $2,500 - $5,000+ 10-20 seconds Camshaft & Valves Wear, breakage $1,500 - $4,000+ 20-40 seconds Turbocharger (if equipped) Shaft seizure, bearing failure $1,000 - $3,000+ 5-15 seconds Complete Engine Replacement N/A $4,000 - $10,000+ 30-60 seconds If you suspect your car has no oil, the correct action is do not start the engine . Check the dipstick. If it's dry, add the correct type and weight of oil immediately. If you accidentally started it and hear knocking or ticking sounds, shut it off right away and have it towed to a mechanic for an inspection. The few seconds it ran may have caused damage, but you might prevent a total engine seizure. Always address your oil level long before it becomes a "no oil" situation.
101
Share

can u put new car radios in oldcars

Yes, you can absolutely install a new radio in an old car, and it's one of the most rewarding upgrades you can make. The process involves ensuring electrical compatibility and often requires a wiring harness adapter and a dashboard installation kit to make everything fit and work correctly. Modern units, like a single-DIN or double-DIN receiver, bring features like Apple CarPlay, Android Auto, Bluetooth, and HD Radio to classic vehicles, dramatically improving your driving experience. The first step is identifying your car's radio size. Most older American cars use a standard single-DIN slot, while many modern units are larger double-DIN sizes. An installation kit is crucial to fill the gaps in your dashboard neatly. The electrical connection is simpler than it seems. Cutting the original wiring is a bad idea. Instead, a wiring harness adapter plugs into your car's existing connector and provides color-coded wires you can easily connect to the new radio's harness, often with simple crimp connectors. The benefits are substantial. Beyond just better sound quality, you gain modern connectivity and safety features. The table below compares popular radio types for classic cars. Radio Type Typical Cost (Unit + Parts) Key Features DIY Installation Difficulty Best For Basic Single-DIN w/ Bluetooth $50 - $150 Hands-free calling, music streaming Low (1-2 hours) Budget-focused users wanting core modern features Premium Touchscreen Double-DIN $300 - $1000+ Navigation, Apple CarPlay/Android Auto, HD Radio Moderate (2-4 hours) Those wanting a fully integrated modern infotainment experience Retro-Style Digital Media Receiver $200 - $500 Period-correct styling, Bluetooth/USB only Low to Moderate Classic car owners wanting modern tech without visual disruption If you're not comfortable with wiring, having a professional install it is a wise investment. They can handle any quirks specific to your vehicle and ensure a clean, reliable installation. This upgrade instantly modernizes an old car's cabin without compromising its classic character.
105
Share

can use dewalt impact driver on car

Yes, you can use a DeWalt impact driver for many automotive tasks, but it's crucial to understand its limitations to avoid damaging your car. An impact driver is excellent for removing stubborn bolts on things like lug nuts, suspension components, or interior panels due to its high rotational force (torque) and concussive blows. However, it should not be your first choice for final tightening or for working with small, delicate, or critical fasteners. The primary risk is over-torquing. Impact drivers are incredibly powerful and can easily shear off bolts or strip threads if you're not careful. For critical applications like lug nuts or engine components, you must always use a torque wrench to achieve the manufacturer's specified tightness. This ensures safety and prevents damage. Impact drivers also lack the fine control of an impact wrench, which is a tool specifically designed for heavy-duty automotive work. Here’s a quick comparison of when to use each tool: Task Recommended Tool Key Consideration Removing stubborn lug nuts Impact Driver or Impact Wrench Use with a snug socket; let the tool's impact action break the bolt loose. Final tightening of lug nuts Torque Wrench Essential for safety; follow your car's manual for the exact ft-lbs specification. Removing interior trim clips Impact Driver (on low setting) Use caution; too much power can break plastic clips. A manual trim tool is often safer. Suspension work (e.g., control arm bolts) Impact Wrench An impact wrench is better suited for these high-torque, often rusted-on bolts. Small engine bay bolts (e.g., valve cover) Hand Ratchet Prevents over-torquing and stripping aluminum threads in the cylinder head. For basic DIY jobs, an impact driver is a versatile addition to your toolkit. Just remember its role is for breaking things loose and rough assembly, not for precision work. Always start with hand tools to break a bolt free if possible, and use the impact driver selectively.
101
Share

can u jump a car with a bad starter

No, you cannot jump-start a car with a failed starter motor. A jump-start only addresses a lack of electrical power from a weak or dead battery. If the battery is charged enough to power the headlights and dashboard, but you hear a single loud "click" when turning the key and the engine doesn't crank, the problem is almost certainly the starter. In this case, applying jumper cables will have no effect. The starter motor is an electric component responsible for physically cranking the engine. When you turn the key to the "start" position, a small amount of power from the battery is sent to the starter solenoid (a relay switch), which then engages the starter motor. If the solenoid or the motor itself is broken, this electrical signal cannot be converted into mechanical action, leaving the engine silent. A jump-start merely provides an external boost to the battery; it does not bypass or repair the internal components of a faulty starter. Here is a comparison to help diagnose the issue: Symptom When Turning the Key Dashboard Lights Likely Cause Will a Jump-Start Help? Single loud click, no engine crank Lights remain bright Bad Starter Motor or Solenoid No Rapid clicking sound, slow or no crank Lights dim significantly Weak/Dead Battery Yes No sounds at all, no crank Lights are completely dead Severely Dead Battery or Bad Connection Yes, if cables are connected properly Engine cranks at normal speed but won't start Lights normal Fuel, Ignition, or Sensor Issue No To confirm a starter issue, you can perform a simple test. With the headlights on, try to start the car. If the lights dim only slightly or not at all when you hear the click, it indicates the battery has power but it's not reaching the starter motor effectively. The only reliable solutions are to have the starter motor replaced or, in some cases, to tap the starter body with a tool while someone holds the key in the "start" position—a temporary fix that might free a stuck solenoid.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.