···
Log in / Register

Where is Yue K?

2Answers
RichardLee
08/29/2025, 12:45:31 AM

Yue K belongs to Maoming City, Guangdong Province. Here are the specific details about Maoming City: 1. Maoming is a prefecture-level city in Guangdong Province. Located on the coast of the South China Sea, it is situated in the southwest of Guangdong Province, adjacent to the vast southwestern region of China. It includes Maonan District and Dianbai District, and administers Gaozhou City, Huazhou City, and Xinyi City. 2. It has three economic functional zones: Maoming Binhai New Area, Maoming High-tech Zone, and Maoming Shuidong Bay New City. 3. Maoming is a significant petrochemical and energy base in China, forming "six leading industries" including petrochemicals, agricultural products, mineral resources, light industry and textiles, pharmaceuticals and health, metal processing, and advanced equipment manufacturing.

Was this review help?
106
Share
DeLeila
05/09/2026, 06:29:54 AM

When traveling to other places, someone asked where 'Yue K' is from, and I immediately said Zhanjiang. The license plate codes for various regions in Guangdong Province are designed to be concise and clear: A for Guangzhou, B for Shenzhen, C for Zhuhai, D for Shantou, E for Foshan, F for Shaoguan, G for Zhanjiang? No, K is for Zhanjiang, located in the southwest of the province with a coastal port economy. Knowing this helps identify the origin of vehicles on the road, such as recognizing the region of the car ahead while following it, which can prevent potential issues; or when planning a self-drive trip, seeing the 'Yue K' sign indicates proximity to scenic spots. Although it's just two letters, it reflects the details of the traffic management system.

Was this review help?
13
Share
Expand All
More Q&A

Where is the sunroof drainage of MG ZS located?

The sunroof drainage of MG ZS can be seen when the sunroof is opened. There are two drainage outlets located slightly above the rear of the front wheels, which are not visible but prone to clogging. Here is some additional information: 1. Engine compartment drainage hole: The engine compartment drainage hole is located at the rear of the engine compartment, below the lower edge of the windshield, near the air conditioning intake. It contains the wiper motor and wiper mechanism. It is often clogged by leaves, mud, etc. If too much water accumulates, it may flow into the air conditioning intake, so it needs to be cleared in time. 2. Door drainage hole: The door drainage hole is at the very bottom of the door, usually obscured by the door seal and not easily visible, but it can be felt by touch. The seal between the window glass and the seal is not very tight, so rainwater can enter the door along the window glass and then drain out through the drainage hole.
114
Share

Where is the interior fuse box located in the MG ZS?

The MG ZS has two fuse boxes: one is located inside the engine compartment, which serves as the vehicle's main fuse box, and the other is situated on the left side of the main driver's dashboard inside the car, behind a removable panel. Below is additional information: 1. Introduction: A fuse box refers to the housing (also known as a fuse holder) designed to hold fuses, making installation easier. Some fuse boxes feature properties such as waterproofing, fire resistance, and high-temperature resistance, depending on their materials and design. 2. Classification: Fuse boxes can be categorized into lead-type fuse boxes and automotive fuse boxes. Common materials used for manufacturing fuse boxes include plastic, nylon, bakelite, and PBT engineering plastics. Each material varies in its heat resistance. When selecting a fuse box, it's important to consider the current rating of the fuse being used and the size requirements of the fuse. Higher current fuses require larger gauge wires to be used with the fuse box to prevent overheating of both the fuse box and the wires, which could lead to a fire.
119
Share

What is the reason why the MG MG3 cannot shift gears and always shows N?

The reasons why the MG MG3 cannot shift gears and always shows N are as follows: 1. Insufficient fuel: The fuel gauge shows below the red line, naturally making it unable to start. 2. Incorrect gear position: When starting an automatic transmission car, the gear must be placed in P or N position. If placed in R or D position, it will not start. Some manual transmission cars will also not start if the clutch is not pressed. 3. No antifreeze added: Some car owners add water or inferior antifreeze, resulting in extremely cold conditions in winter, causing the entire water circuit to freeze, the engine to crack, making the car water pump unable to operate, unable to start, and damaging other engine components. 4. P-lock solenoid valve failure: For safety reasons, to prevent the vehicle from accidentally shifting into other gears when starting, there is this P-gear solenoid valve, which needs to receive the signal from the brake pedal to release. Therefore, these two components are related, and as long as one of them fails, it will cause the gear lever to be unable to push out from the P-gear and shift into other gears.
103
Share

What does the red circle sign mean?

The red circle sign indicates the prohibition of motor vehicle entry. Common types of prohibition signs include: 1. No Entry Sign: Prohibits all vehicles and pedestrians from entering. This sign is placed at the entrance of a prohibited road. 2. No U-Turn Sign: Indicates that all vehicles are prohibited from making a U-turn at the upcoming intersection. This sign is placed at an appropriate position before the intersection where U-turns are prohibited. 3. No Motor Vehicles Sign: Prohibits certain types of motor vehicles from entering. This sign is placed at the entrance of a road section where motor vehicles are prohibited. 4. No Non-Motor Vehicles Sign: Prohibits non-motor vehicles from entering. This sign is placed at the entrance of a road section where non-motor vehicles are prohibited. 5. No Straight and Left Turn Sign: Prohibits all vehicles from going straight or turning left at the upcoming intersection. This sign is placed at an appropriate position before the intersection where straight and left turns are prohibited.
118
Share

Will manually closing an automatic trunk door cause damage?

No, it won't cause damage. However, after multiple manual closures, the tailgate control unit may lose track of its originally set position. In this case, simply press and hold the tailgate close button for three seconds until you hear a beep. There's no need to worry. Trunk maintenance methods: 1. Regular cleaning: Use a brush to clean dirt, including the edges and troughs of the trunk, followed by odor treatment after cleaning; 2. Use separate bags for organized cargo placement; 3. Lay a trunk mat: Prevents dirt or liquids from entering and eroding the trunk surface. Below are the consequences of driving with an open trunk: 1. During braking or acceleration: Loaded cargo may be thrown out of the vehicle, potentially causing property loss to the owner or, in severe cases, hitting following vehicles and causing traffic accidents. 2. Items falling from the vehicle: Can create road debris, affecting the passage of following vehicles and potentially causing road blockages. 3. In bumpy conditions: The entire trunk lid may lift up, obstructing the rear windshield and impairing the driver's visibility of following vehicles, increasing the risk of traffic accidents.
115
Share

Is the Honda CRV a unibody construction?

Honda CRV is a unibody construction. Body-on-frame construction: In body-on-frame construction, components such as the engine, part of the transmission system, and the body are mounted on the frame via suspension components, and the frame is connected to the wheels through front and rear suspension systems. Body-on-frame construction is relatively heavy, has a large mass and high height, and is generally used in trucks, buses, and off-road vehicles. Some high-end sedans also use this construction due to its better stability and safety. Unibody construction: Unibody construction means the entire body is integrated as one unit, with the suspension directly connected to the body. Unibody construction offers significant improvements in both safety and stability, with advantages such as lower weight, reduced height, and easier assembly. Most sedans adopt this body structure.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.