···
Log in / Register

2021 Nissan X-Trail Body Dimensions

5Answers
DiAnderson
09/05/2025

In terms of body dimensions for the all-new 2021 X-Trail, the body length is 4648mm, width is 1839mm, height is 1699mm, and the wheelbase is 2705mm. Compared to the 2020 model, the width has increased slightly while other dimensions have decreased a bit. More details about the 2021 Nissan X-Trail are as follows: Detail 1: The all-new 2021 X-Trail features a subtle detail on the side profile - designers intentionally carved a concave surface between the waistline and wheel arches, which Taisaku Saito refers to as the U-shape. This cleverly reduces the bulky appearance of the side profile. Additionally, higher trim levels will come equipped with 19-inch wheels. Detail 2: On the side profile of the all-new 2021 X-Trail, nearly all design elements are straight, including the roofline, waistline, and prominent wheel arches, aiming to emphasize the vehicle's sense of power. This approach shares similarities with the current Toyota RAV4. Furthermore, the two-tone body color and chrome trim along the upper window line are fashionable elements not seen on previous X-Trail models.

Was this review help?
19
4
Share
LeElizabeth
09/17/2025

I remember driving the 2021 Nissan X-Trail last time, and its body dimensions were quite suitable—about 4,681 mm in length, 1,840 mm in width, and 1,730 mm in height, with a wheelbase of 2,706 mm. It wasn’t too difficult to park in the city, and the handling wasn’t sluggish. The space was very spacious, making it easy to load luggage in the back seat, ideal for weekend getaways. For longer trips, like when I took friends camping last time, the trunk had plenty of room for tents and backpacks. The height was well-designed, making it effortless to get in and out, especially compared to the Honda CR-V in the same class—the slightly longer wheelbase added more stability. Overall, this size strikes a good balance between handling and practicality, making it an ideal choice for family use.

Was this review help?
17
3
Share
Expand All
SanGraham
10/31/2025

From a practical driving perspective, I'm quite familiar with the 2021 X-Trail's dimensions: 4681mm in length, 1840mm in width, 1730mm in height, and a wheelbase of 2706mm. It's easy to handle when parking, fitting comfortably into standard parking spaces. The interior space is well-designed, offering ample room in both front and rear rows without cramped legroom. The dimensions also affect fuel consumption—the wider body provides stability at high speeds but may consume slightly more fuel in urban traffic jams. Compared to the Toyota RAV4, it's slightly wider but offers more comfortable interiors. It's advisable to regularly check the vehicle's alignment, especially if frequently carrying heavy loads that could affect the suspension. As a daily commuter, its dimensions are both practical and safe.

Was this review help?
6
5
Share
Expand All
LaKathryn
12/14/2025

I often drive the 2021 Nissan X-Trail when taking my kids out. Here are the body dimensions: length 4681mm, width 1840mm, height 1730mm, and wheelbase 2706mm. The spacious interior means kids can play around in the back without feeling crowded. The moderate height makes it easy to install child seats, and the trunk can easily accommodate a stroller. In terms of safety, the stable dimensions ensure the car doesn't sway when turning, making highway driving more reassuring.

Was this review help?
5
5
Share
Expand All
Lena
02/03/2026

From a technical perspective, the dimensions of the 2021 X-Trail are 4681mm in length, 1840mm in width, 1730mm in height, and a wheelbase of 2706mm. These dimensions affect the drag coefficient and handling. The width of 1840mm ensures stability at high speeds, but the height of 1730mm slightly increases urban fuel consumption. The 2706mm wheelbase enhances interior comfort and improves space utilization compared to the previous model. In actual driving experience, the size and suspension are well-matched, offering good off-road capability and handling rough roads with ease. Maintenance-wise, be aware that changes in dimensions may lead to uneven tire wear.

Was this review help?
6
1
Share
Expand All
More Q&A

How to Check the Date of Headlights on a Used Car?

To read the production date of the headlights on a used car, you can check the stamp on the headlights, which is usually located at the bottom left or bottom right corner of the headlight. Below are specific details about replacing headlights: 1. Choosing Headlights: When selecting new headlights, you should choose the appropriate bulb model based on your car, while also considering factors such as annual inspections and whether the battery can handle it. It is best to opt for original equipment manufacturer (OEM) headlights. 2. Installation and Removal: Avoid touching the glass shell of the bulb directly with your hands during installation or removal. When installing the bulb, do not touch the glass part with your fingers, as even the slightest oil residue on the glass can shorten the bulb's lifespan and pose a risk of cracking with prolonged use. 3. Light Intensity: When replacing the bulb, compare the light intensity and adjust it properly in time, as adjusting it later can be time-consuming and labor-intensive.
8
3
Share

How to Adjust When the Car Body is Not Straight During Curb Parking?

Practice makes perfect. Here are the adjustment methods for an unaligned car body during curb parking: Use the wiper to judge whether the car front is straight—no problem. By comparing the wiper with road markings, maintain a fixed distance or angle while driving. If it deviates, it indicates the car front is not straight. Additionally, depending on each person's height difference, other parts of the car front can also serve as reference points, such as the roof corner or reinforcement ribs. Actually, the most crucial point to ensure the car front is straight is to learn to look into the distance, observing distant traffic lights, the rear of the car ahead, lane markings, etc., to see if the car body is straight. When parking at the curb, after selecting the parking position, turn the steering wheel to the right. At this time, the steering angle should not be too large. When the center of the car front is about to align with the right edge line, immediately turn the steering wheel back to the left. The steering wheel turning range can be slightly larger at this point.
10
5
Share

What does a yellow light with an 'a' inside a circle on the dashboard mean?

The reason for a yellow light with an 'a' inside a circle appearing on the dashboard is that the engine auto start-stop system is active. At this time, the car often shuts off, and releasing the brake will automatically restart the engine, allowing normal driving to resume. The conditions for auto start-stop activation include: engine coolant temperature being too low after a cold start, typically below 70 degrees Celsius; outside temperature below 5 degrees Celsius, or cabin temperature below 20 degrees Celsius when heating is on; insufficient battery charge, usually below 60%; steering wheel angle exceeding 30 degrees; front seat belts not fastened; and parking on a slope. The auto start-stop function activates automatically each time the car is started, provided the above conditions are met, and the vehicle speed exceeds 3 km/h for about 4 seconds, without requiring any additional action from the driver. However, the auto start-stop function must be turned off in the following situations: during water wading; when driving on a slope (most cars are usually set to automatically disable it in this case); and when refueling, the engine must be completely turned off and power must be cut before refueling.
16
1
Share

What is the working principle of an evaporator?

The working principle of an automobile evaporator: The liquid refrigerant enters through the feed port, while the heating steam heats the heating tube bundle inside the heating chamber. The thicker tube in the middle of the heating chamber, due to its smaller heating area compared to the heating tube bundle, causes the refrigerant vaporized by the heating tube bundle to rise and enter the evaporation chamber. Below are related introductions: 1. Definition of the evaporator: The evaporator is a device used to heat the refrigerant and absorb heat from the external environment, mainly composed of a heating chamber and an evaporation chamber. 2. Application in thermal units: In fresh air heat exchange units and fan coil units, the evaporator primarily provides chilled water during the cooling process and heated refrigerant during the heating process. 3. Application in ground source heat pump systems: Its role in ground source heat pump systems is opposite to that of the condenser. During the heating process of the ground source heat pump unit, the evaporator acts as a ground source side device, heating the circulating water on the ground source side. The heated water is then transferred to the condenser through heat exchange in the unit, where the heat from the hot water is discharged by the condenser.
18
5
Share

What do 4L and 4H mean in 4WD vehicles?

4H and 4L are two modes available in four-wheel-drive vehicles. 4H stands for four-wheel-drive high-speed mode, while 4L stands for four-wheel-drive low-speed mode. These two drive modes have certain differences in controlling the transmission and are used in different scenarios. Properly utilizing the four-wheel-drive modes according to terrain can not only improve the vehicle's off-road capability but also reduce fuel consumption to some extent. Usage scenarios for 4H and 4L modes: 1. Slippery surfaces: If driving on snow or slippery roads, the 4H mode is very suitable, as it ensures sufficient drive wheels while avoiding excessive driving force that could cause wheel slip. 2. Climbing: Due to its strong driving force, the 4L mode can be used when climbing slopes or during off-road driving, maximizing the vehicle's power. 3. High-speed driving: High-speed four-wheel drive is not suitable for highway driving. For part-time four-wheel-drive vehicles, dry paved roads are not suitable for 4H or 4L modes; only the 2H mode should be selected.
11
3
Share

What documents are needed for car transfer?

The seller needs to prepare the original ID card of the vehicle owner, vehicle registration certificate, vehicle license, original purchase invoice or transfer invoice of the vehicle, and the buyer needs to provide the original ID card of the buyer. Some regions also require a "vehicle purchase quota". The procedures for car transfer are as follows: 1. Obtain the form: obtain and fill out a copy of the motor vehicle change, transfer, modification, suspension, or scrapping approval form. 2. Stamp: affix the same seal as the original registration, and private vehicles must submit the owner's ID card for verification. 3. Review: go to the vehicle management section of the traffic police detachment and submit the documents to the registration acceptance counter for review by the handling officer. 4. Inspection: vehicles that meet the transfer conditions will be sent to the motor vehicle inspection counter for inspection and confirmation. 5. Payment: after passing the inspection, for transfers or changes within the same county or city, go directly to the license plate management counter to wait for notification and pay the fee. 6. Tax payment: the transaction tax is issued by the used car trading center and is charged at 1.48% of the vehicle's estimated value.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.