Where is the VIN number located on the Trumpchi GM8?

1 Answers
SanMaximus
07/30/25 6:13am
The VIN number of the Trumpchi GM8 is located at: 1. On the front partition panel of the engine compartment; 2. On the left side of the instrument panel; 3. On the central pillar nameplate of the vehicle. The Trumpchi GM8 is an MPV with the following body dimensions: length 5089 mm, width 1884 mm, height 1822 mm, wheelbase 3000 mm, and a fuel tank capacity of 65 liters. The Trumpchi GM8 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 185 kW and a maximum torque of 390 Nm, with the maximum power achieved at 5250 rpm. It features a MacPherson independent front suspension and a multi-link independent rear suspension.
Was this review help?
13
4
Share
More Forum Discussions

How to Use the Electronic Parking Brake on the Honda Vezel?

To use the electronic parking brake on the Honda Vezel, simply lift or press the toggle switch. The Honda Vezel is a compact SUV. Taking the 2020 Honda Vezel as an example, its body dimensions are: length 4328 mm, width 1772 mm, height 1605 mm, with a wheelbase of 2610 mm. The 2020 Honda Vezel is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 96kW and a maximum torque of 155Nm, paired with a 6-speed manual transmission. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam rear suspension.
11
0
Share

What is the tire size of the Audi Q5?

The tire size of the Audi Q5 is 235/55R19. Tires are one of the components of a car, directly in contact with the road surface, working together with the car's suspension to cushion the impact during driving. The Audi Q5 is a mid-size SUV under FAW-Volkswagen Audi, with body dimensions of 4753 mm in length, 1893 mm in width, and 1659 mm in height, and a wheelbase of 2908 mm. The Audi Q5 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 140 kW and a maximum torque of 320 Nm, paired with a 7-speed dual-clutch transmission. It features a front-engine, four-wheel-drive layout, with both front and rear suspensions using a five-link independent suspension system.
18
2
Share

Do You Need to Wash the Car Before Applying Window Tint?

It is necessary to wash the car before applying window tint. If the car body is not clean, bumps may appear after tinting, affecting the car's appearance, and the raised areas are also prone to damage. The functions of car window tint include: 1. Providing heat insulation in summer, saving air conditioning energy; 2. Reducing energy loss in winter, maintaining the interior temperature; 3. Blocking ultraviolet rays, extending the lifespan and quality of interior furnishings; 4. Reducing glare, ensuring safe and comfortable driving. The steps for applying car window tint are: 1. Lay large bath towels on the front hood and dashboard; 2. Cover the seats with seat covers and wrap them tightly with plastic wrap; 3. Thoroughly clean the car windows; 4. Spray a small amount of window tint installation liquid on the outer surface of the window glass; 5. Carefully position the soft template over the glass; 6. Cut the window tint according to the template; 7. Apply the window tint and use a squeegee to remove any bubbles between the tint and the glass.
6
5
Share

How much horsepower does the 485 engine have?

The horsepower of the 485 engine is approximately 45 hp. Horsepower can be converted into power, which is an important performance parameter of an engine. It indicates how much work an object can perform per unit of time. The greater the power, the more work can be done per unit of time. An engine is a machine that can convert other forms of energy into mechanical energy. Its components include: two crank-link mechanisms and a valve train. The engine consists of: 1. Fuel supply system; 2. Cooling system; 3. Lubrication system; 4. Ignition and starting system. It converts linear motion into rotational motion, providing the basic power guarantee for the operation of the car.
16
1
Share

Why is the car air conditioner not cooling?

There are several reasons why a car air conditioner may not be cooling properly: 1. Severe internal wear of the compressor; 2. Refrigerant leakage; 3. Circuit system malfunction; 4. Clogged receiver-drier; 5. Excessive moisture in the dryer or too much dust in the filter; 6. Overfilling of refrigerant in the car air conditioning system. Methods for maintaining a car air conditioner include: 1. Regularly checking the refrigerant and compressor oil; 2. Cleaning the condenser surface; 3. Cleaning the evaporator surface. The car air conditioning system, abbreviated as car AC, consists of a refrigeration system, heating system, ventilation and air purification devices, and a control system.
2
0
Share

Is it necessary to replace two tires at once?

Whether it is necessary to replace two tires at once depends on the specific situation: 1. If one of the four tires on a car is accidentally damaged and needs to be replaced, only that one tire needs to be changed; 2. When tires are worn down to the specified position due to normal wear and need replacement, it is recommended to replace two tires at the same time. Precautions for tire use include: 1. Pay attention to the degree of tread wear; 2. Avoid tire pressure being too high or too low; 3. Remove debris from the tread to prevent punctures that could lead to air leaks or blowouts; 4. Rotate tires regularly to prevent uneven wear. The functions of tires are: 1. To cushion the impact experienced during driving; 2. To ensure good comfort and smooth driving; 3. To maintain good adhesion between the wheels and the road surface, improving traction, braking, and off-road capability; 4. To bear the weight of the vehicle and ensure its driving performance.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.