Where is the nameplate located on the Regal?

Is the Changan CS55plus equipped with a Blue Whale engine?

Changan CS55plus is equipped with a Blue Whale engine. The Changan CS55plus comes with a Blue Whale 1.5T turbocharged engine, delivering up to 156Ps of horsepower, a maximum power of 132kW, and a peak torque of 300N·m. Below is an introduction to the Changan CS55plus: 1. In terms of dimensions, the new CS55PLUS Blue Whale edition measures 4500 1860 1690mm in length, width, and height, with a wheelbase of 2650mm. 2. For the interior, it features a dual-screen design with a high resolution of 1920*720 and a high-performance image processing engine. The central control screen is 10.25 inches, with the most notable feature being the use of a contrasting color scheme of 'Smoke Black' and 'Fiery Red.' The seats are designed as 'one-piece racing seats' and are wrapped in premium NAPPA leather, enhancing both support and comfort. 3. In terms of safety features, the Changan CS55PLUS Blue Whale edition is equipped with 6 airbags, providing rapid and effective protection in emergencies with a response time of 0.03 seconds. It also includes Bosch airbag sensors for comprehensive collision signal perception and analysis, ensuring all-around, no-blind-spot safety protection.

118

Share

What is the difference between a nearly new car and a brand new car?

The differences between a brand new car and a nearly new car are as follows: 1. Condition: A brand new car is completely unused; a nearly new car refers to vehicles that have been used for a short period and are now on the market for resale. 2. Mileage: A brand new car typically has around 30 kilometers on the odometer; a nearly new car has relatively low mileage. Methods for selecting a nearly new car: 1. Verify the identity: When purchasing, carefully check the owner's ID, original vehicle invoice, purchase tax certificate, vehicle license, road maintenance fee certificate, annual inspection certificate, and insurance policy to ensure everything is in order. 2. Inspect repainting: Look for any peeling paint, new marks on the surface, or excess paint around the exhaust pipe, trim, and windows, as these may indicate the car has been repainted. 3. Check welding points: Ensure the seams between doors, front, rear, and body are smooth. Uneven gaps, bent lines, or missing trim pieces may indicate the car was involved in an accident. 4. Examine the interior: Check for abnormal rust or corrosion on seats, carpets, and interior panels. Verify that all configurations are complete and functioning properly.

120

Share

What are the hidden features of the Toyota IZOA?

Toyota IZOA's hidden features include the remote key control for opening/closing all four windows and the digital tire pressure monitoring function. Below are some related introductions about the Toyota IZOA: 1. Front design: The IZOA adopts Toyota's family-style "Keen Look" front design, which is simple, fashionable, and exudes a sharp temperament, making it truly distinctive. Thanks to the "SEXY DIAMOND" design concept, diamond elements are integrated into every detail of the IZOA's design, showcasing a sense of fashion and quality from all angles. From the front to the rear, every part of the car has been meticulously crafted, with body lines that are neither redundant nor lacking, achieving seamless coordination. The stylish and dynamic appearance is both visible and tangible. 2. Visual impact: The overall exterior design is endowed with a sense of visual impact. Features such as the coupe-like silhouette, floating roof, hidden rear door handles, hollowed-out rear spoiler combined with the slightly protruding ducktail design on the trunk lid create a "dual spoiler" effect. Additionally, the 3D boomerang-style LED taillights, which stand out from the body, catch the eye and present a dynamic effect that seems ready to spring into action.

112

Share

What grade of gasoline should be used for the Changan Oshan X5?

All models of the Changan Oshan X5 should use 92-grade gasoline. This gasoline grade is recommended in the official vehicle user manual. In addition to checking the appropriate gasoline grade in the vehicle user manual, you can also find it on the fuel tank cap, which will be clearly marked. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-grade gasoline, those between 10.0-11.5 should use 95-grade gasoline, and those with a higher compression ratio should use 98-grade gasoline. However, with the application of new technologies, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be adjusted to use lower-grade gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92-grade gasoline contains 92% isooctane and 8% n-heptane, while 95-grade gasoline contains 95% isooctane and 5% n-heptane. If the Changan Oshan X5 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-grade gasoline, using higher-grade gasoline will not cause damage, but the increase in octane number will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher-grade gasoline, using lower-grade gasoline can cause engine knocking. Because the octane number is much lower, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

120

Share

What type of engine oil is used for the Great Wall Wingle 5?

The original engine oil for the Great Wall Wingle 5 is 5W-30. In terms of applicability, the original oil is more suitable for the engine. However, depending on different needs, engine oil can also have other benefits such as noise reduction, fuel efficiency, and improved performance. Therefore, you can also choose engine oils from brands like Mobil, Shell, or Castrol. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother for the car. The second number represents the kinematic viscosity of the oil at 100°C. The higher this number, the better the oil maintains its viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil for the Wingle 5 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply some new oil to the oil seal of the new oil filter and tighten it clockwise by hand. Add the new engine oil through the oil filler cap on the engine valve cover, usually filling about three-quarters of the bottle. Start the engine and let it run for 5 minutes, then check for any leaks around the drain plug and oil filter. If there are leaks, they should be repaired. After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.

111

Share

What are the new regulations for vehicle scrapping?

Non-commercial vehicles and commercial vehicles have different scrapping periods, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat sedans and 7-seat SUVs, non-commercial small and mini vehicles have no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping process. In addition to the above vehicles, small and mini non-commercial passenger vehicles, large non-commercial sedans, and wheeled special machinery vehicles also have no usage period limit. Common scrapping regulations for commercial vehicles: Small and mini taxi passenger vehicles have a scrapping period of 8 years, medium-sized taxi passenger vehicles have a scrapping period of 10 years, and large taxi passenger vehicles have a scrapping period of 12 years. Public transport passenger vehicles have a scrapping period of 13 years, other small and mini commercial passenger vehicles have a scrapping period of 10 years, and large and medium-sized commercial passenger vehicles have a scrapping period of 15 years. Mini commercial trucks have a scrapping period of 8 years, light and large commercial trucks have a scrapping period of 10 years. The vehicle scrapping process is as follows: The vehicle owner applying for scrapping and renewal must fill out the "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" in duplicate and affix the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period, the vehicle inspection office will determine if they meet the scrapping standards and issue a "Vehicle Scrapping Notice" accordingly. The vehicle owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Inspection Form", "Scrapped Vehicle Recycling Certificate", and vehicle dismantling photos to the vehicle inspection office for verification and signature. The license plates will be reclaimed, and the scrapping registration will be processed according to regulations. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle cannot be driven back to the registration location due to damage, the owner can submit the vehicle for scrapping to a local recycling company. If a commercial vehicle is converted to a non-commercial vehicle, it must still be scrapped according to the original commercial vehicle's scrapping period. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of a motor vehicle, the original owner can apply to the vehicle management office to use the original license plate number when registering a new vehicle. The application must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation; (2) The owner must have owned the original vehicle for more than three years.

108

Share