···
Log in / Register

Where is the engine number of the Great Wall Voleex?

6Answers
McCecilia
07/29/2025, 04:41:57 AM

The engine number of the Great Wall Voleex is located at the rear right of the engine, where it connects to the transmission. You will need to remove the air filter box to see it. In terms of body dimensions, the Great Wall Voleex measures 3950mm in length, 1717mm in width, and 1542mm in height, with a wheelbase of 2368mm. Regarding power, the Great Wall Voleex comes with two engine options. The first is a 1.3-liter inline 4-cylinder naturally aspirated engine, paired with either a 5-speed manual or a 5-speed manual-automatic transmission, delivering a maximum power of 68KW and a maximum torque of 118NM. The second option is a 1.5-liter inline 4-cylinder naturally aspirated engine, also paired with either a 5-speed manual or a 5-speed manual-automatic transmission, producing a maximum power of 78KW and a maximum torque of 138NM.

Was this review help?
117
Share
VanVictoria
08/12/2025, 02:28:03 AM

I've been driving the Great Wall炫丽 for several years. The engine number is usually located on the engine block, and you can see it as soon as you open the hood, on the side near the radiator fan. The number sequence is engraved on the metal surface. Remember to turn off the engine and wait for it to cool down before checking to avoid burns. Clean off any dust, and the number should be clear—typically a 17-digit alphanumeric combination that corresponds to the vehicle's registration and maintenance records. I also recommend taking a photo and saving it on your phone for future reference, like during oil changes or insurance checks, so you don’t have to dig around the engine bay again. Bring a small flashlight when checking, as it helps in low-light conditions. Overall, it’s not difficult to find, and the location is fixed—it won’t change randomly. Checking it regularly also helps you stay informed about your car’s condition.

Was this review help?
6
Share
Expand All
SimonLynn
10/05/2025, 03:52:56 AM

As a seasoned driver, I've driven the Great Wall Florid several times. The engine number is located on the side wall of the engine in the engine compartment, roughly at the rear right position. Just open the hood and crouch down a bit to spot it. The number is deeply engraved on the metal surface, making it resistant to wear. This number is crucial for vehicle identification - it's needed for ownership transfer during sales and annual inspections. Finding it is straightforward: park the car securely, turn off the engine (safety first!). I usually wipe it clean with a cloth first, as dirt might obstruct the view. Like a unique ID card, this number can also help verify if it's been tampered with. Remember to record it in your vehicle documents for future reference - it'll save time when getting repairs or replacing parts.

Was this review help?
12
Share
Expand All
LorenzoRose
11/18/2025, 09:36:33 PM

As an ordinary car owner, I've dealt with the engine number issue on the Great Wall Voleex. It's located on the engine surface - after opening the hood, look for the upper part of the cylinder block where there's usually a numbered area engraved on both left and right sides. Key steps: let the vehicle cool down with engine off, the position remains fixed, clean the area for better visibility. This number is used for registration or service reference, keeping it legible helps avoid complications.

Was this review help?
13
Share
Expand All
DeStella
01/08/2026, 11:13:00 PM

I believe locating the engine number requires attention to safety details. For the Great Wall Florid, the number is engraved on the right side or bottom of the engine block. Lift the hood and look for it on the cylinder block, near the cooling fins. Turning off the engine is crucial, and wearing gloves prevents burns—cleaning the area first is even better. This number is as important as the VIN, affecting insurance and ownership transfer. I regularly check mine to ensure it hasn't been damaged or altered.

Was this review help?
8
Share
Expand All
AlexaDella
04/05/2026, 04:22:57 AM

From my perspective, the engine number of the Great Wall Florid is located on the surface of the engine block, easily visible once the hood is opened, typically in the top or front area. The exact spot is often covered by dust, so it's advisable to wipe it clean for inspection. This 17-digit code is essential for vehicle identification. When searching, using a phone flashlight can be helpful, especially in low-light conditions for better visibility. Maintaining the number is simple—take a photo for records or note it in the manual, making it easy for repair shops to verify. Keeping it clear aids in quickly addressing accidents or service needs.

Was this review help?
20
Share
Expand All
More Q&A

What to Do in Case of a Car Collision?

Here are the steps to follow after a vehicle collision: 1. If the accident involves minor damages and both parties agree on liability, first take photos of the scene and then move the vehicles to a location that does not obstruct traffic to avoid causing congestion. 2. If there is a dispute over responsibility or the cause of the accident, protect the scene, call the police immediately, and report the incident to your insurance company. Below are the standards for traffic accident compensation: (1) Compensation items for personal injury to the victim include: medical expenses, lost wages, nursing fees, transportation costs, accommodation expenses, hospitalization meal subsidies, and necessary nutrition fees. (2) If the victim is disabled due to the injury, compensation items in addition to those in item 1 include: disability compensation, disability aid equipment costs, living expenses for dependents, as well as necessary rehabilitation fees, nursing fees, and follow-up treatment costs incurred during recovery and continued treatment. (3) Compensation items in case of the victim's death include, in addition to those in item 1: funeral expenses, living expenses for dependents, death compensation, and other reasonable expenses such as transportation, accommodation, and lost wages incurred by the victim's relatives for funeral arrangements. (4) Compensation for emotional distress suffered by the victim or the deceased's close relatives.
115
Share

What are the test contents for the motorcycle D license?

Driver's license D test includes Subject 1, Subject 2, and Subject 3. The following are the regulations stipulated in the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": 1. Regulations: Article 27 The motor vehicle driver's test content is divided into the road traffic safety laws, regulations, and related knowledge test subject (hereinafter referred to as "Subject 1"), the site driving skills test subject (hereinafter referred to as "Subject 2"), and the road driving skills and safe civilized driving common sense test subject (hereinafter referred to as "Subject 3"). 2. The passing standards for each subject test: (1) The full score for Subject 1 is 100, and a score of 90 or above is considered passing; (2) The full score for Subject 2 is 100, for large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 or above is considered passing, while for other vehicle types, a score of 80 or above is considered passing; (3) The full scores for Subject 3 road driving skills and safe civilized driving common sense tests are 100 respectively, and scores of 90 or above in each are considered passing.
108
Share

How to Solve Fogging on Side Windows in Rainy Weather?

In rainy weather, fogging on the side windows can be addressed using toothpaste, water repellent, or air conditioning defogging. Here are specific solutions to the fogging issue: On rainy days, evenly apply toothpaste or soap to the car's side window glass. Wait for a while until the applied soap hardens, then wipe it clean with a towel. A wax layer will form on the glass surface, which has excellent water-repellent properties and can effectively prevent fogging or water droplets on the rearview mirror from causing blurred vision. Purchase a specialized water repellent and evenly spray or apply it to the rearview mirror. A protective film will form on the rearview mirror's surface, which also has excellent hydrophobic properties, effectively preventing fogging or water droplets on the rearview mirror and ensuring clear visibility. Turn on the car's air conditioning to cold air and adjust the vents to the front windshield to quickly clear fogging on the glass. If you want to completely eliminate fogging, you can turn on the air conditioning to hot air before starting the car and blow it directly onto the front windshield for 3 minutes. This can fundamentally prevent glass fogging. Air conditioning cooling can also dehumidify and achieve the fastest defogging effect. The driver can turn on the air conditioning's cooling mode and adjust the blowing mode to the windshield setting. In about ten seconds, the fog can disappear.
102
Share

What is Vehicle Purchase Tax?

Vehicle purchase tax is a type of tax levied on units and individuals who purchase specified vehicles within the country. It evolved from the vehicle purchase surcharge. The specific details about vehicle purchase tax are as follows: 1. Characteristics: In addition to the common features of taxes, vehicle purchase tax has its own unique characteristics: single scope of taxation, single taxation link, single tax rate, single collection method, taxation with specific purposes, and external price taxation where the tax burden is not transferred. 2. Functions: Reasonably raising construction funds, standardizing government behavior, adjusting income disparities, cooperating in combating smuggling, and safeguarding national rights and interests.
114
Share

What Does the Old Car Replacement Subsidy Mean?

Old car replacement subsidy refers to the cash compensation provided to car owners who replace their used cars before purchasing new ones. This subsidy is primarily designed to encourage the recycling of used vehicles, phase out older models, and achieve economic and environmental goals. Below are the specific steps for the replacement subsidy process: 1. Transfer the old car out of the city or send it to a qualified dismantling facility for scrapping. 2. Check relevant information through designated service points or platform information systems and select the reward models listed on the transaction platform. 3. Fill out and submit the application form via the platform information system (or at a service point). The transaction platform will review the owner's information, and after supervision and approval by relevant government departments, the platform will notify the owner of the review results. 4. Approved owners can either print the enterprise reward voucher corresponding to the intended new vehicle from the platform information system or collect it at a service point. 5. The owner presents the enterprise reward voucher to the car dealership to purchase a new vehicle. 6. The dealership uploads the new car purchase information to the transaction platform. 7. The owner submits materials related to the old car elimination and new car replacement at a service point to apply for the government subsidy. After approval, the government subsidy will be transferred to the owner's bank account within N working days.
115
Share

How to Install Front Car Radar?

The installation method for front car radar: 1. First, mark the installation positions of the four sensors on the front bumper, apply black electrical tape, and then drill holes using the provided drill bit. 2. Remove the plastic cover above the grille, use a wire tool (such as an iron wire) to pull the sensor signal wires into the engine compartment, connect the sensors, and organize the wiring harness. 3. Remove the cover above the accelerator pedal, guide the signal wires of the four sensors from the front of the car into the cabin. Install the radar display near the A-pillar and tuck the wires into the interior seams. 4. Open the glove box cover on the passenger side, locate the ACC fuse interface (can be identified using a test pen), and connect the red wire. 5. Route the red ACC power wire from under the dashboard to the main driver's cabin and connect it to the pink wire of the main unit plug. Connect the black wire to the ground. Locate the brake light wire in the main wiring harness (use a test pen to identify; it lights up when the brake is pressed and turns off when released), and connect it to the white wire of the main unit plug. 6. Plug the connectors of the four sensor signal wires, power wires, and display wires into the main unit, then start the car for debugging. Since the four sensor signal wires are not labeled, each sensor needs to be tested individually to determine the correct order, and the connectors should be reinserted accordingly. 7. After debugging, secure the main unit, restore the interior, and complete the installation.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.