···
Log in / Register

Where is the cabin air filter located on the Peugeot 308?

6Answers
TuckerLynn
08/28/2025, 01:10:06 AM

Peugeot 308's cabin air filter is located in the front engine compartment under the right front windshield. The Peugeot 308 is a compact 4-door, 5-seater sedan with body dimensions of: length 4590mm, width 1820mm, height 1488mm, and a wheelbase of 2675mm. The Peugeot 308 is equipped with a 1.2T turbocharged engine and a 6-speed automatic transmission, delivering a maximum power of 85 kilowatts at 5500 rpm. It features front-wheel drive, with MacPherson strut independent front suspension and torsion beam non-independent rear suspension.

Was this review help?
112
Share
NoahDella
09/09/2025, 11:37:01 PM

I remember when my Peugeot 308's AC started emitting odors, I researched the filter location and found it behind the glove compartment on the passenger side. You need to open the glove box door, empty its contents, then locate small clips on the sides or bottom—press gently to release and remove the entire glove box. The filter housing usually hides behind it; just pry open the cover to remove the old filter for replacement. The process isn't difficult—I've done it twice myself, saving money and hassle with just an adjustable wrench or Phillips screwdriver. The key is patience: dismantle slowly as plastic parts are fragile. I recommend checking every 15,000 km or each spring to maintain fresh air and prevent allergies. Always opt for OEM or reputable brand filters—they effectively trap dust and bacteria, enhancing driving comfort.

Was this review help?
1
Share
Expand All
DeMarley
10/24/2025, 12:25:48 AM

As a frequent car repairer, I can tell you that the Peugeot 308's cabin air filter is located inside the glove compartment on the passenger side. To access it, first remove the glove box, then you'll see the filter cover at the rear. Simply open the cover to replace the filter. Don't use excessive force when handling the screws - gentle pressure is enough to remove them. A clogged filter reduces cooling efficiency and increases fuel consumption, so replacing it every 15,000 km is cost-effective. Doing it yourself can save you over 50 yuan, and all you need is a pair of pliers. Additionally, choosing an activated carbon filter is better as it effectively removes odors and protects the cabin environment. Maintaining this small detail extends your AC's lifespan and reduces future repair costs.

Was this review help?
7
Share
Expand All
CassidyMarie
12/06/2025, 11:49:28 PM

I'm very familiar with the Peugeot 308's filter location. It's behind the glove compartment on the passenger side. Just remove the compartment and you'll immediately see the filter cover, making replacement straightforward. Change it every 2 years to prevent dust from entering your lungs. The operation is quite simple.

Was this review help?
4
Share
Expand All
DelJonathan
01/27/2026, 01:04:47 AM

The air conditioning filter of the Peugeot 308 is precisely located behind the glove compartment in front of the passenger seat. After removing the glove compartment, you can see the filter housing. When opening the cover for replacement, pay attention to the arrow indicating the airflow direction to avoid incorrect installation. The process simply requires removing a few small screws with a Phillips screwdriver or releasing the clips. The filter specifications mostly match standard-sized activated carbon types, which can efficiently filter pollen and pollutants. Replacing it yourself saves money and is quick, taking about 20 minutes. It is recommended to check every 15,000 kilometers to maintain system efficiency and prevent odor buildup. Remember to use protective gloves to avoid inhaling dust.

Was this review help?
3
Share
Expand All
JulianaLee
04/22/2026, 11:13:25 PM

Maintaining the air conditioning filter by yourself is quite simple. For the Peugeot 308, the filter is located behind the glove box on the passenger side. Just remove the glove box and replace it directly, saving both time and money with DIY. Replacing the filter with a new one every year can improve air quality and help prevent colds. When buying a filter online, choose one with high ratings. The hands-on process also helps develop your skills.

Was this review help?
15
Share
Expand All
More Q&A

Reasons for Unstable Idle Speed During Cold Start of a Car

Reasons for unstable idle speed during cold start of a car are as follows: Throttle Carbon Buildup: Blockage in the intake tract can cause idle fluctuations, and carbon or oil deposits inside the throttle are the most common causes of unstable idle speed. Carbon buildup on the throttle affects its opening degree, which in turn impacts the air intake volume, causing the engine speed to fluctuate erratically after a cold start, accompanied by strong vibrations. Severe oil or carbon deposits in the throttle, including dirty intake tracts, can make it difficult to start the car in cold weather. Cleaning the throttle is necessary, and throttle cleaning itself is considered a routine maintenance item. Weak Spark from Spark Plugs: Spark plugs can also accumulate carbon deposits, which can be cleaned to restore their activity. However, some spark plugs may experience performance degradation as they near the end of their service life. Weak sparks from spark plugs in individual cylinders can affect the car's performance. Faulty spark plugs can cause "misfire" symptoms, but minor faults in individual cylinder spark plugs may lead to unstable idle speed. Therefore, when a car exhibits unstable idle speed, cleaning or replacing the spark plugs is also a viable troubleshooting option.
114
Share

Is a 1.5L Engine Powerful Enough for Sedans?

Generally speaking, a 1.5L engine is definitely sufficient for daily use by ordinary people, such as in compact cars and microvans. However, if you frequently drive on highways for long distances, engage in off-road operations, or traverse mountainous roads, it's better to opt for a slightly larger displacement. Engine Output Power: When discussing a car's power performance, most people refer to the engine's horsepower as a benchmark. However, in reality, the vehicle's weight also constantly affects its power performance. Using the power-to-weight ratio to assess whether a car's power is sufficient is more scientific than simply looking at the power output. Engine Output Torque: In fact, the parameter that truly reflects a car's power is not just the power output but also the torque. Torque represents the engine's force output; the greater the torque, the greater the driving force on the wheels, and the faster the acceleration. Based on the current standards for most vehicles, an A0-class car with 1505N·m, an A-class car with 1755N·m, and a B-class car with 2005N·m are considered sufficient.
104
Share

Why Can't the Brake Pedal Be Depressed and the Vehicle Fails to Start?

Brake pedal can't be depressed and the vehicle fails to start, the possible reasons may be the disappearance of vacuum in the brake booster pump or air leakage or component failure in the vehicle's brake booster pump. Below are the detailed explanations of the specific causes: Disappearance of vacuum in the brake booster pump: Because the owner stepped on the brake several times after parking, the vacuum in the brake booster pump disappeared, making it difficult to depress the brake pedal without assistance. The booster pump does not work when the engine is off, so the owner can try to start the engine again, press the brake pedal firmly, and it will return to normal after starting. Air leakage in the vehicle's brake booster pump: Due to air leakage or component failure in the vehicle's brake booster pump, the owner will feel very strenuous when stepping on the brake because the booster pump function is lost. If the owner still cannot restore normal operation after stepping on the brake several times, they should go to a nearby repair shop for inspection and continue driving only after the problem is resolved.
104
Share

Will Insurance Companies Cover Water-Damaged Vehicles?

Insurance companies will assess claims for water-damaged vehicles on a case-by-case basis. If you have purchased auto damage insurance, the insurer will cover water damage to your vehicle. According to auto damage insurance provisions, the insurance company is responsible for compensating total or partial losses of motor vehicles caused by rainstorms, floods, landslides, etc. Moreover, the reformed auto damage insurance includes coverage for vehicle theft, separate glass breakage, spontaneous combustion, engine water damage, no-deductible clauses, and third-party special agreements when the responsible party cannot be found. Estimated impact on the vehicle: In addition to understanding the underwater conditions clearly, you should also make a rough estimate of the difficulty based on the vehicle you are driving. Observe whether the water has reached the floor of the cabin or the exhaust pipe, and check if the water level exceeds the midline of the tires. If either of these two standards is exceeded, it can easily cause severe damage to components such as the vehicle's engine and computer. Conditions for water damage insurance coverage: Simply purchasing comprehensive insurance or water damage insurance does not guarantee coverage for water damage to your vehicle. If the damage is caused by improper operation leading to water ingress, the insurance company will not provide compensation.
114
Share

Does the car color change registration require the owner to go in person?

For the color change registration, either the car owner or a friend can handle it on behalf of the owner. If a friend is handling it, they need to bring the owner's ID card, along with the "Motor Vehicle Change Registration Application Form", the agent's identity proof, the motor vehicle registration certificate, and the motor vehicle driving license. According to Article 6 of Chapter 2 of the "Road Traffic Safety Law", if the color change area of a motor vehicle does not exceed 30%, there is no need to go through the change registration. On the contrary, if it exceeds 30%, registration is required, and it must be done within 10 days after the vehicle color change. Precautions for vehicle wrap color change: Before preparing to change the color of the vehicle wrap, it is necessary to consult the vehicle management office where the vehicle is registered to see if the region allows the use of wraps to change the vehicle color. If the region does not support this method, the registration procedure cannot be processed after the change, and the wrap must be completely removed to restore the original color of the vehicle. Additionally, according to the "Motor Vehicle Registration Regulations", owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply to the vehicle management office for change registration. According to Article 10, registered motor vehicles must apply for change registration under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Replacement of the entire vehicle due to quality issues. Change of use nature, such as commercial vehicles changed to non-commercial vehicles or vice versa. The owner's residence moves out of or into the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with emblem patterns and equipped with alarms and emblem lights as required. Other motor vehicles are not allowed to paint, install, or use the emblem patterns, alarms, or emblem lights exclusive to the above-mentioned vehicles or similar to them. Article 56 of the "Motor Vehicle Registration Regulations" states that if the body color is changed without going through the change registration as required, the public security traffic management department will issue a warning or impose a fine. The vehicle may also be impounded and required to restore the original body color.
104
Share

Where to Apply for Vehicle ETC?

ETC can be applied for at bank branches, online service points, or highway service areas. The application requires the original and photocopies of the vehicle owner's valid ID card and vehicle license. If the application is not made by the owner themselves, the agent's valid ID card must also be provided. The photocopy of the vehicle license should include the page stamped with the most recent annual inspection seal. Additionally, a bank debit or credit card application form is required, as this card will be used to bind the ETC card. After obtaining the card, the vehicle owner can go to a designated bank branch to receive and install the ETC onboard device for free, with no additional charges. Applicants must be between 18 and 60 years old and own a vehicle in their personal name. Required documents for official vehicles: An introduction letter from the vehicle owner (with official seal); a photocopy of the organization code certificate or business license (with official seal); the agent's original ID card; the original vehicle license; and the vehicle that requires ETC. ETC can also be applied for online. For example, using mobile apps like WeChat or Alipay, search for ETC and follow the prompts to complete the application. Alternatively, directly search for ETC application services and follow the instructions. Since various banks have their own online services and sections, they have launched online ETC application services to facilitate vehicle owners, allowing applications to be made without leaving home. Here are some precautions for ETC installation: Do not obstruct the driver's view; it is best to install it behind the rearview mirror. Many car models have steeply angled windshields, which can reduce the driver's field of vision. Installing the ETC without considering this can increase blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that might block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out, triggering the switch and locking the electronic tag, rendering it unusable. Unlocking will require a visit to an ETC service point. This mechanism is designed to prevent multiple vehicles from sharing one device. ETC usage notes: The ETC transaction sensing range is 8 meters. To avoid issues caused by the preceding vehicle's ETC device malfunction, maintain a distance of more than 10 meters from the vehicle in front to prevent automatic payment for the preceding vehicle. The ETC lane recognition speed is 20 km/h; exceeding this speed may result in failure to read the vehicle's device information and subsequent payment failure. If a debit card is used to bind the ETC, insufficient balance will also cause payment failure.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.