···
Log in / Register

Where is the cabin air filter located in the Changan CS55?

6Answers
McGianna
09/06/2025, 02:32:09 AM

The cabin air filter of the Changan CS55 is located behind the battery in the engine compartment. You need to open the hood, and the air filter is a black plastic cover. The function of the cabin air filter is: The cabin air filter is a filter installed in the car's air conditioning system, which can absorb dust particles, reduce respiratory discomfort, minimize irritation for allergy sufferers, and protect the air conditioning cooling system. Below is some relevant information about the Changan CS55: 1. The Changan CS55 has a body length, width, and height of 4500mm, 1855mm, and 1690mm respectively, with a wheelbase of 2650mm. 2. In terms of power, the new Changan CS55 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115 kW and a peak torque of 225 Nm. The transmission system is paired with either a 6-speed manual or a 6-speed automatic transmission.

Was this review help?
114
Share
DiMason
09/18/2025, 02:14:10 AM

The cabin air filter of the Changan CS55 is located behind the glove compartment in front of the passenger seat. As someone who frequently tinkers with my own car, I've replaced this filter several times. Before starting, empty the glove compartment. After removing the contents, you'll see a small cover at the bottom or back of the glove box. Simply pry open the cover and pull out the filter. If you can't find it, you may need to remove the entire glove compartment box - the operation is simple but requires gentle handling to avoid breaking the clips. The design is quite user-friendly, avoiding the complexity of engine compartment access. I recommend checking it every six months, especially in cities with severe air pollution. A dirty filter will reduce airflow from the AC and may even cause unpleasant odors. After replacing it with a new filter, the air inside the car becomes much fresher, improving the driving experience. Always remember to buy OEM-spec filters that match the exact size - don't cheap out on incompatible replacements.

Was this review help?
1
Share
Expand All
LeLandon
11/01/2025, 02:41:31 AM

I've worked on quite a few Changan CS55 models, and the cabin air filter is located inside the glove compartment on the passenger side. The recommended procedure is to first remove the entire glove box: press both sides to release it, then pull out the filter cover from behind to replace the filter. The well-designed location protects the filter from dust. Replacement intervals depend on usage conditions - if you do a lot of highway driving, consider changing it every season. Regular maintenance maintains AC efficiency, saves fuel, and extends compressor life. I recommend wearing gloves during replacement to avoid bacterial contact. A worn or clogged filter can cause abnormal AC operation and slight power reduction. It's an easy DIY job that owners can handle themselves, no need to rush to the 4S shop for unnecessary expenses.

Was this review help?
16
Share
Expand All
SanLawson
12/15/2025, 01:49:26 AM

Hey buddy, as a car owner, I know where the air filter for the Changan CS55 is located. On the passenger side, there's a glove compartment. Open it up, clear out the clutter, and you'll find a small panel at the back. Pull it out to access the filter for replacement. The position isn't complicated, and the design is decent—not as difficult as you might imagine. When replacing it, take your time to align the filter properly and ensure it's not installed backwards, which could affect the filtration efficiency. After installing a new filter, driving feels much fresher, especially on long trips.

Was this review help?
13
Share
Expand All
OAmir
02/04/2026, 02:42:05 AM

With my decades of driving experience, the air conditioning filter for the Changan CS55 is fixed behind the glove box on the passenger side. After opening the box and clearing out any items, you can locate the cover, pull out the filter, and proceed with the replacement. Its position near the passenger compartment facilitates frequent checks—I replace mine every six months to prevent bacterial buildup. A reminder for beginners: always turn off the engine before starting for safety first—don't rush into the task. The thoughtful design of the filter's location minimizes maintenance hassle, allowing you to save money and time by doing it yourself while keeping the cabin air fresh.

Was this review help?
4
Share
Expand All
MariaRose
04/30/2026, 12:06:02 PM

As a tech enthusiast, I've researched the location of the Changan CS55's cabin air filter, which is typically found behind the glove compartment on the passenger side. Simply removing the compartment reveals it. This space-optimized design facilitates DIY replacement. The filter features an activated carbon layer for air purification and is recommended to be replaced quarterly. When replacing, pay attention to the directional markings on the filter to avoid incorrect installation, which could impact efficiency. A high-quality filter enhances AC performance, saves energy, reduces odors, and improves the overall driving experience.

Was this review help?
19
Share
Expand All
More Q&A

What brand is the engine of the CFMOTO 250SR?

The engine of the CFMOTO 250SR is produced by Zhejiang CFMOTO Power Co., Ltd., a motorcycle brand. Below are the relevant details: 1. Location: CFMOTO was established in 1989, with its factory located in Hangzhou, Zhejiang. It is one of the earlier enterprises in China focused on the production and R&D of water-cooled motorcycles and a brand that has consistently adhered to differentiated development. Its products mainly feature water-cooling and larger displacements, making it one of the major domestic brands for high-displacement motorcycles. The motorcycles currently used by the National Honor Guard are produced by CFMOTO. 2. Performance: The engine of the CFMOTO 250NK adopts a single-cylinder, water-cooled, four-valve structure, with a displacement of 249.2ml, a maximum power of 19.5kW/9000rpm, and a maximum torque of 22Nm/7500rpm.
108
Share

What is the fuel consumption of the Chery 3x?

The Chery Tiggo 3 generally has a comprehensive fuel consumption of around 8-10 liters per 100 kilometers. For the Chery Tiggo 3, the average comprehensive fuel consumption per 100 kilometers should normally be between 8 to 10 liters. However, fuel consumption can vary due to different driving habits, road conditions, traffic congestion, vehicle load, fuel quality, use of air conditioning, and whether the car is in the break-in period or is an older model. The following situations can also lead to higher fuel consumption: 1. If you notice that the vehicle's coasting distance has significantly shortened during driving, check whether the tire pressure meets the standard. Insufficient tire inflation can also increase fuel consumption. Tip: Inflate the tires properly when necessary. 2. Check the degree of tire wear. If the tires are severely worn, they may frequently slip, increasing fuel consumption. Tip: Replace the tires with new ones if necessary. 3. If you hear abnormal noises from the wheels during driving or starting, promptly check the bearings and braking system for faults. If the wheels do not rotate normally, it can affect the vehicle's speed and increase fuel consumption.
101
Share

What type of suspension does the Haval M6 use?

The Haval M6 uses a MacPherson strut independent suspension at the front and a double-wishbone independent suspension at the rear. Below are detailed introductions to these two types of suspensions: 1. The MacPherson strut independent suspension is a relatively common type of front suspension, used in many types of vehicles. It mainly consists of a coil spring, shock absorber, and lower control arm. Compared to other types of suspensions, this design is simpler in structure, lighter in weight, and more flexible in use. 2. The double-wishbone suspension refers to a suspension system with two wishbones. This type of suspension uses shock absorbers without lateral loads, and the upper end is very low in height. This design can reduce the vehicle's height and also change the car's styling. Using this type of suspension can provide excellent handling and improve driving comfort. It is considered a more advanced suspension, and only a small number of vehicles use this type of suspension.
114
Share

Does a car need an oil change if it's parked for a long time?

Yes, a car needs an oil change if it's parked for a long time. Here are the hazards of not changing the oil: 1. Causes the oil to become ineffective and deteriorate: The oil not only fails to protect but also increases wear and damage to the components. 2. Accumulation of impurities in the oil over time: Such as metal shavings, which can lead to corrosion of internal components. 3. Damages the engine: Once the oil deteriorates and its performance declines, the lubrication properties for bearings and the cooling function for mechanical transmission parts will be lost, further damaging the engine. Lack of oil causes direct damage, whereas not changing the oil depends on whether the oil has deteriorated and its performance has declined. Damage occurs after deterioration and performance decline, and the process is relatively longer, causing gradual damage.
115
Share

Where is the brake switch located on the new Santana?

The brake switch on the new Santana is installed on the brake master cylinder. Braking principle of the new Santana: The brake switch is a braking switch mostly located on the brake pedal. When the brake pedal is pressed, it triggers a switch action. Typically, pressing the brake pedal activates this switch, changing its open/close state to control the illumination of the brake lights. Additionally, other systems requiring brake signal detection also obtain the brake signal from here. Steps to replace the brake switch: The brake light switch is generally located above the brake pedal. First, remove the protective panel, which is the floor panel above the brake, clutch, and accelerator pedals. After removing the panel, the brake light switch can be seen above the brake pedal. The switch features a twist-lock design and can be pulled out by rotating it counterclockwise.
118
Share

Is the aoff button a start button or a shutdown button?

aoff is the shutdown button for the auto start-stop function in cars. The auto start-stop function can reduce exhaust emissions and save fuel, and many cars are now equipped with it. Here are the details: 1. Cars equipped with the auto start-stop function have a shutdown button, and pressing the button can turn off the auto start-stop. The shutdown button for auto start-stop is not actually aoff, but a circle with an A inside and off below the circle, which represents turning off the auto start-stop. 2. For cars with the auto start-stop function, when waiting at a red light, as long as the battery has sufficient charge and the engine water temperature reaches the normal temperature, the system will shut down the engine. If the battery charge is insufficient, the auto start-stop system will not work.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.