···
Log in / Register

Where does the second attempt of Subject 2 start from?

6Answers
MacNatalie
07/29/2025, 04:56:53 PM

Subject 2 requires starting over from the beginning for any mistake made, regardless of which item it is, during the second attempt. Below are specific details about Subject 2: Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test subject. Test Content: The small vehicle test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved path. The large vehicle test items include stake test, stopping and starting on a slope, parallel parking, crossing a single-plank bridge, driving on a curved path, turning at a right angle, passing through a width-limited gate, passing through continuous obstacles, driving on undulating roads, making a U-turn on a narrow road, as well as simulating highway driving, continuous sharp turns on mountain roads, tunnels, rainy and foggy weather, slippery roads, and emergency handling.

Was this review help?
107
Share
LeCole
08/15/2025, 02:45:23 PM

I've taught many students to take the driving test. For the second attempt at Subject 2, the test definitely starts from the beginning, with the entire process repeated. For example, items like reversing into the garage, parallel parking, and stopping on the slope all start over from the first one. The test won't skip ahead just because you failed on the slope last time. The test rules are set this way—each attempt is an independent and complete evaluation, which helps comprehensively assess your driving skills. When preparing for the second attempt, don't just focus on the point of failure; instead, practice all sections systematically, especially spending extra time on weaker areas. Stay relaxed mentally—failure is normal, so treat it as a new opportunity. I recommend finding a good instructor to simulate the test environment, familiarize yourself with the standards for each maneuver, and practice more times to significantly improve your success rate. The key is to solidify your foundational skills.

Was this review help?
6
Share
Expand All
LeJake
10/16/2025, 03:32:59 AM

Last year, I failed my first attempt at Subject 2 of the driving test, and the second exam was truly starting from scratch—not resuming from where I failed. I messed up on the reverse parking, but on the exam day, I still had to begin with the hill start and go through all the items in sequence. Here’s some advice: Practice driving two hours daily a week before the test, focusing on reinforcing weak areas but not neglecting others; keep your cool—staying calm makes passing easier. Follow instructions carefully during the test, move steadily, and remember that examiners prioritize proper execution over speed. A small tip: Exchange techniques with fellow learners—peer feedback is quite helpful. In short, solid preparation is key—it’s really no big deal.

Was this review help?
9
Share
Expand All
LeMatteo
11/29/2025, 03:20:44 AM

For the second attempt at Subject 2, you must start from the beginning again, following the same sequence of items: reverse parking, parallel parking, etc. The rules do not allow continuing from the interruption point; each attempt is a completely new test. During preparation, focus on strengthening the areas where you failed, such as practicing the hill start multiple times, but do not neglect overall review. Stay calm and practice diligently to pass.

Was this review help?
6
Share
Expand All
QuinnAnn
01/19/2026, 09:56:23 PM

From the perspective of someone who's been there, don't worry if you fail the Subject 2 driving test. The second attempt still starts from the beginning with all items, including reversing and parallel parking. After failing, it's recommended to spend more time practicing weak points, such as finding an instructor for one-on-one targeted training. However, don't just focus on that one skill—overall driving abilities need to keep up. During the test, stay calm and take it step by step. Kids, don't put too much pressure on yourselves. Safe driving is important, and diligent learning will always pay off.

Was this review help?
15
Share
Expand All
SawyerLee
04/15/2026, 10:50:04 PM

I often share driving tips. For the second attempt at Subject 2, you indeed need to restart the entire process from the beginning, such as starting with reverse parking followed by parallel parking one by one. This design ensures comprehensive skills, and you must go through each step during the exam. After failing, analyze the reasons and strengthen practice—don’t overlook small details like speed control. Mentally treat it as a new attempt; failure is normal. I recommend using simulation software or practicing with an experienced driver. Familiarizing yourself with the test site can be a big help. In short, diligent practice is key—if you don’t succeed the first time, just try again next time.

Was this review help?
16
Share
Expand All
More Q&A

How to Check the Fuel Level on a Volkswagen Dashboard?

On the right side of the dashboard, there is a needle resembling a gas station icon, which is the fuel gauge. The fuel gauge has a series of marks arranged in a fan shape, with "F" marked at the top and "E" at the bottom. When the needle on the fuel gauge is close to "F," it indicates that your car has plenty of fuel. When the needle drops near "E," it means the fuel level is very low, and the fuel warning light will illuminate, indicating the need to refuel as soon as possible.
102
Share

How to Turn on Bluetooth in Passat?

When the vehicle is stationary, the onboard Bluetooth will become visible within five minutes after turning on the ignition. Press the button (answer key) on the multifunction steering wheel twice consecutively, and a prompt tone will sound from the vehicle's speakers.
115
Share

What is the method for tire pressure reset?

Turn on the ignition and press the car button, the screen will display the maintenance cycle; press the back button to display car maintenance and inspection, use the knob to select the tire pressure monitoring system. Rotate the knob to select the option to store now; press the confirm button and the tire pressure storage prompt will appear.
116
Share

Why is the truck lacking power when climbing slopes?

Truck lacking power when climbing slopes may be caused by the following reasons: 1. Engine fuel system failure: Clogged fuel injectors, fuel pipe leaks, reduced fuel pump power, or blocked fuel filters can all lead to insufficient power when climbing. The feeling of powerlessness mainly occurs because the engine doesn't get enough fuel during climbing, resulting in decreased combustion efficiency and failure to meet horsepower requirements; 2. Air intake system issues: Components such as air filters or throttle valves being clogged or malfunctioning, leading to insufficient air intake, can cause the truck to lack power when climbing; 3. Spark plug issues: Poor spark plug ignition may result in acceleration powerlessness; 4. Engine problems: If the steering wheel or body shakes noticeably when the truck is stationary, it indicates that at least one cylinder of the engine is not operating properly or has stalled; 5. Other symptoms: If black smoke comes out of the exhaust pipe, it indicates problems with the combustion chamber, ignition system, or valves; if blue smoke comes out, it may be due to oil leaking into the combustion chamber; 6. Insufficient tire pressure.
120
Share

How to Replace Coolant in Refine S3?

After opening the engine hood, unscrew the radiator cap, then open the radiator drain valve to drain the coolant. Find a hose that can connect to tap water, insert it into the radiator filler port, turn on the faucet, and let the tap water continuously flow through the engine cooling system. During the flushing operation, keep the engine idling and maintain the above operation until clean water flows out from the radiator.
114
Share

How to Remove the Air Conditioning Evaporator in a Buick Excelle?

Start with the 2 bottom screws first, then unscrew the 3 top screws. When removing, it's best to support with your hand or leg to prevent excessive force on the glove box screw holes causing deformation. Disconnect the low-pressure pipe from the compressor, then remove the high-pressure pipe from the connection at the liquid storage tank. After removal, seal the pipe ends to prevent foreign objects from entering. First locate the plastic cover plate under the front of the passenger seat. Use a 5.5mm hex socket wrench to remove 3 screws and take out the dirty filter element.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.