···
Log in / Register

Where are the drainage holes located on the Haval H6?

6Answers
Sheila
07/29/2025, 05:45:17 PM

The Haval H6 has drainage holes in the sunroof, all four doors, on both sides of the rear bumper, and under the windshield wipers. Below are the specific details of the Haval H6: 1. Body Dimensions: The Haval H6 measures 4615mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2680mm, a fuel tank capacity of 58L, and a curb weight of 1675kg. 2. Powertrain Configuration: The Haval H6 features a MacPherson strut front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 210Nm, paired with a 7-speed dual-clutch transmission.

Was this review help?
114
Share
PenelopeMarie
08/15/2025, 05:08:31 PM

I've been driving a Haval H6 for five years and always pay special attention to cleaning the drainage holes during car washes. The sunroof drainage holes are located at the four corners of the roof, especially on the inner sides of the A-pillars and C-pillars on both sides - you can see small round holes by gently pulling back the rubber seals. The door drainage holes are easier to find, located at the very bottom of all four doors as thumb-sized elongated slits where rainwater drains out. The fuel filler drainage hole is hidden at the bottom of the refueling port recess, shaped like a small crescent moon. There's also the AC drainage hole beneath the front chassis, directly under the front passenger seat where you can feel the black plastic pipe outlet outside the car. Last summer after heavy rain, I found the front passenger carpet wet because the rear right sunroof drainage hole was clogged with leaves. Now I use thin wire to clear all these spots every month.

Was this review help?
4
Share
Expand All
LaWalter
10/17/2025, 01:33:36 AM

For owners who frequently drive long distances, clogged drainage holes can cause major issues. The Haval H6's sunroof drainage holes are located at the four corners of the roof, and the covers can be pried open with a key to remove debris. The most overlooked drainage holes are those in the engine compartment, located on both sides of the U-shaped channel below the wipers—these spots are prone to accumulating fallen leaves. There's also an emergency drainage hole in the trunk at the bottom of the spare tire well, sealed with a rubber plug, which is not recommended to be opened. I make it a habit to use an air gun at the car wash to flush all drainage holes, especially the crescent-shaped gaps at the bottom of the doors, where trapped mud can lead to rust over time. Last time, a friend's car had water seep into the fuel tank due to a clogged hole below the fuel cap, costing thousands in repairs.

Was this review help?
4
Share
Expand All
LaFinley
11/30/2025, 01:17:13 AM

Just helped my dad clean the drainage holes of the H6. There are coin-sized openings at each corner of the sunroof—best to regularly open the sunroof and wipe away dust with a damp cloth. The door drainage holes are located along the bottom edge of the door panels, totaling eight small holes. The fuel tank cap drainage hole is only visible when the fuel cap is opened, situated in the recess at the bottom. Before the rainy season, it's essential to unclog the windshield drainage outlets, found beneath the wipers at the edge of the hood. Remember, the air conditioning drainage tube under the chassis is located in the middle of the car and drips when the AC is on. Blocked holes can lead to minor issues like water accumulation and strange noises, or severe problems like electrical damage from flooding. It's recommended to clean them every six months.

Was this review help?
2
Share
Expand All
KinsleyLynn
01/20/2026, 02:41:09 AM

Last time I washed my car, I found water accumulation in the right rear door, which made me realize the importance of drain hole locations. For the Haval H6, the main drainage points are: square holes at the four corners of the sunroof on the roof, which can be cleared of sediment using a syringe; two drain holes at the bottom of each of the four doors, with rubber flaps that need to be pulled open regularly; a crescent-shaped hole at the bottom of the recessed fuel filler neck that tends to collect dust; and most crucially, the drainage channels under the front windshield, with plastic drain outlets on both sides of the engine compartment where fallen leaves often clog. When cleaning, I always wear rubber gloves to prevent scratches. Now, at the end of each season, I check all these points against the diagram in the manual, as unclogging is much cheaper than repairing leaks.

Was this review help?
13
Share
Expand All
ThomasRose
04/16/2026, 03:21:38 AM

Cleaning the drainage holes yourself is actually quite simple. First, open the sunroof and wipe the square channels at the four corners, then squat down to check the drainage slits at the bottom edge of the doors, which can be cleaned with an old toothbrush. Remember to unscrew the cap under the fuel tank lid to clean the small hole. The air conditioning drainage hole is located in the middle of the chassis, and you can see the black rubber tube by lying under the car. Once, I found the drainage holes on both sides of the U-shaped channel under the hood were half blocked by leaves. It's recommended to park on a flat surface for ten minutes after rain and observe four spots under the car: no dripping under the engine indicates normal conditions, and there should be small patches of water stains under the doors. If any spot is completely dry, the corresponding drainage hole might be blocked and needs attention.

Was this review help?
3
Share
Expand All
More Q&A

What are the tips for using the E-gear in an automatic transmission?

Tips for using the E-gear in an automatic transmission: 1. Press the car's brake pedal; 2. Press the car's one-touch start button; 3. The dashboard lights up, and the vehicle's power is turned on; 4. Press the economy mode or sport mode button inside the car, which is the E-gear or S-gear mode; 5. The car will then enter economy mode or sport mode. The E-gear is the kinetic energy recovery gear for hybrid vehicles. When the E-gear is engaged, kinetic energy is recovered during coasting to charge the battery. Hybrid vehicles have a longer range than pure electric vehicles and lower fuel consumption than pure gasoline vehicles. Many consumers purchase plug-in hybrid vehicles encouraged by national policies. The difference between plug-in hybrids and regular hybrids is that plug-in hybrids require charging the battery.
117
Share

What is the ground clearance of the Changan Eado?

The ground clearance of the Changan Eado is 160mm. Below is some knowledge about ground clearance. Ground clearance varies by vehicle type: For sedans, the ground clearance ranges between 110 to 150 millimeters; for SUVs, it ranges between 200 to 250 millimeters; for sports cars, it is below 100 millimeters. Function of ground clearance: Ground clearance determines a vehicle's ability to pass obstacles. It refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles like rocks and tree stumps without collision. The greater the ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven terrain, but the higher the center of gravity, which reduces stability. The smaller the ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower the center of gravity, which increases stability.
104
Share

What are the dimensions of the Mocha?

The new generation Mocha is positioned as a mid-size SUV, with body dimensions of 4875mm × 1960mm × 1690mm and a wheelbase of 2915mm. First-generation Mocha dimensions: This model has body dimensions of 4875mm × 1960mm × 1690mm and a wheelbase of 2915mm. For a mid-size SUV, these body dimensions are very spacious. First-generation Mocha model: The Mocha model comes with abundant configuration features. The new vehicle is equipped with LED daytime running lights, a panoramic sunroof, multi-layer soundproof glass, rain-sensing wipers, an automatic sensing function for the luggage compartment, an app remote control function, a leather multifunction steering wheel, dual-zone automatic climate control for the front seats, an onboard PM2.5 filter, and steering wheel paddle shifters.
108
Share

Will there be more automatic or manual transmission cars in the future?

Automatic transmission cars are becoming increasingly prevalent. Here's an introduction to the gears: 1. 1st Gear: Used for normal starts or when climbing very steep slopes. The speed typically remains around 10 km/h in this gear; 2. 2nd Gear: Acts as a transitional gear for acceleration after starting, or for low-speed driving and steep slope climbing, with speeds usually around 20 km/h; 3. 3rd Gear: Generally used at speeds between 20 km/h and 40 km/h, commonly employed for city driving; 4. 4th Gear: Suitable for speeds ranging from 40 km/h to 60 km/h; 5. 5th Gear: Used for speeds above 60 km/h, typically during high-speed driving; 6. N (Neutral) Gear: Used when the vehicle is idling, such as at traffic lights—shift to N and engage the handbrake; 7. R (Reverse) Gear: The reverse gear, engaged after the vehicle has come to a complete stop for reversing.
118
Share

What Causes a Motorcycle to Stall When Throttling Down?

If a scooter stalls when throttling down, it may be caused by an overly rich air-fuel mixture. You can check whether the air filter is oil-soaked or clogged, whether the carburetor's mixture ratio is too rich, or whether the fuel level is too high. Alternatively, immediately reapply the throttle slightly after decelerating from high speed, which usually prevents stalling. Main causes: 1. Unstable idle speed: Stalling when throttling down indicates unstable or excessively low idle speed! If it's too low, it's easy to fix—just adjust it. However, if it's unstable, the issue is more complicated. 2. Prolonged inactivity: If the vehicle hasn't been started for a long time, gasoline can form gum deposits that clog the carburetor's inner walls and jets. Drain the old gasoline and refuel before testing.
106
Share

What causes a single clunking sound from the front wheels when starting to turn?

The main reasons for a single clunking sound from the front wheels when starting to turn include: 1. Faults in the steering gear, power steering, or chassis components; 2. Malfunctions in the outer CV joint, shock absorber, or power steering pump; 3. Insufficient or deteriorated power steering fluid; 4. Worn or rusted ball joints; 5. Corrosion of the control arm ball joint. The issues mentioned above can often be resolved by applying lubricant, but there are several types of abnormal noises that require attention: Loose steering tie rod ball joint: This can cause steering wheel vibration, a loose chassis, and premature tire wear, so the steering ball joint should be replaced promptly. Aging or damaged CV joint boot: The engine's power transmission primarily relies on the cooperation of the inner and outer CV joints. The inner CV joint connects to the transmission differential, while the outer CV joint connects to the wheel. Each CV joint is protected by an outer boot, which prevents contaminants from entering and damaging the joint and prevents leakage of CV joint grease. When the protective boot ages or gets damaged, it can lead to CV joint failure, further causing abnormal noises during steering.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.