Where are the airbags located in the Geely Boyue Pro 2020 model?

How to Avoid Driving Blind Spots?

Avoiding driving blind spots can be achieved through the following methods: 1. Special blind spots: Avoid continuous lane changes and frequently observe to stay aware of the situation behind your vehicle; 2. A-pillar blind spots: Install intelligent safety systems and reduce speed; 3. Inner wheel difference blind spots: Pay attention to pedestrians at street corners, widen the turning radius, and honk to alert pedestrians; 4. Overtaking blind spots: Check the front of the vehicle when overtaking and observe the rear when meeting another vehicle to avoid accelerating and hitting pedestrians; 5. Parking blind spots: Choose parking areas carefully and ask for assistance in directing parking; 6. Mountain road blind spots: Mountain roads have many curves—slow down before turning, honk, control speed, and drive as close to the right side of the lane as possible; 7. Light-related blind spots: Maintain a safe distance when exiting tunnels or driving at night.

2

5

Share

Which Button to Press When Car Windows Fog Up?

Press the defogger button, turn on the air conditioning (A/C) switch, set the temperature to the lowest, and activate the external air circulation to remove fog. Both cold and warm air can defog car windows, but warm air works slower than cold air. The most effective method is using cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing and achieving defogging. The method for defogging with warm air is the same as with cold air, but note that warm air should not be used on rainy days as it may initially worsen the fog. Always use external air circulation when defogging car windows. The reason car windows fog up: There is a temperature difference between the inside and outside of the car. If the temperatures differ, the surface with the lower temperature has a lower saturated vapor pressure than the surrounding environment, causing water vapor to accumulate on the glass surface in tiny droplets, forming fog. Methods to defog car windows: Air Conditioning (Cold Air): Use the air conditioning's dehumidification function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car without turning on the AC, the high humidity from their breath can quickly fog up the windshield. Turn on the AC to blow cold air onto the windshield, using its dehumidification function to remove fog quickly. If humidity is too high and the AC is ineffective, slightly open the windows to rapidly reduce cabin humidity. Combining this with the AC can speed up the process. Air Conditioning (Warm Air): Use warm air to reduce the temperature difference and defog the windows. In winter, blowing warm air onto the glass quickly raises its temperature, reducing the temperature difference between the inside and outside surfaces and preventing heavy fogging. Note that the rear and side windows heat up slower, so it takes longer to fully defog them. Whether using automatic or manual AC, turning it on helps with dehumidification. Avoid setting the temperature to the coldest to prevent frost buildup on the outer windshield. Applying Anti-Fog Products: Spray a small amount of defogger onto the car windows and wipe it clean to remove dirt and stains. This leaves a thin transparent protective film that prevents water vapor from condensing into fog, especially useful in cold winters. Alternatives to defogger include dish soap, soapy water, glycerin, alcohol, or saline solution. Let these dry, then wipe off excess residue with a chamois or soft dry cloth. They can keep windows fog-free for several days. Opening Windows for Airflow: If the fog is light, open the side windows to create airflow between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. This method works similarly to using cold air from the AC. However, it has clear drawbacks: it cannot be used during rain, snow, on highways, or when fog is heavy. Rear Window Heating: Most cars have a rear window heating function, though the button location may vary. Turn on the rear defroster, and the fog will disappear in about a minute.

16

5

Share

What is the difference between BMW with Li and without Li?

L refers to the long-wheelbase model, and i indicates that BMW's engine technology is electronic fuel injection technology. The main difference between cars with Li and without Li is the length of the wheelbase and the engine technology. The i is a technology that BMW had in the 1980s, which was a very advanced technology in the world at that time. BMW proudly added the i to the model number at that time, and now it is inherited from the past, just like BMW's double-kidney grille. The following is an introduction to BMW cars: 1. BMW (Bavarian Motor Works), the full Chinese name is Bayerische Motoren Werke AG, a German luxury car brand. BMW's car series include i, X, Z, and pure numbers 4 models, and several series such as 1, 2, 3, 4, 5, 6, 7, and 8. 2. BMW was founded in 1916 and is headquartered in Munich, Bavaria, Germany. The blue and white logo of BMW is the color of the state flag of Bavaria, where BMW's headquarters is located.

1

3

Share

How to Add Windshield Washer Fluid?

To activate the windshield washer, pull the wiper control stalk located on the right side of the steering wheel toward the driver. Here is relevant information about windshield wipers: 1. Usage Instructions: Use wipers when raining; avoid using them to wipe dust. Prefer slow speed over fast speed. Maintain the vehicle's washer system properly and avoid exposure to high temperatures, frost, or dusty conditions. 2. Replacement Method: Lift the wiper arm, press the clip underneath to remove the wiper blade, detach the wiper, pry up the front end of the center clip, insert the new wiper blade into the center clip, pull it tight by hand until you hear a click sound indicating successful replacement. 3. Function: To remove rain, debris, and dust adhering to the vehicle's windshield, thereby improving driver visibility and enhancing driving safety.

7

1

Share

What is the gear shift lever called?

The lever used for shifting gears in a car is called a gear shift lever, also known as a gear stick. Manual transmission gear shift lever: The gear shift lever in a manual transmission car has gears marked as 1, 2, 3, 4, 5, R, and N. Some manual transmissions have five forward gears, while others have six. Automatic transmission gear shift lever: The gear shift lever in an automatic transmission has positions marked as P, R, N, D, and S, which correspond to Park, Reverse, Neutral, Drive, and Sport modes, respectively. Some automatic transmissions also have an L gear, where L stands for Low, indicating a low-speed gear. Column shifter (or steering column shifter): Some cars have the gear shift lever designed behind the steering wheel, which is called a column shifter. The advantage of a column shifter is that it does not occupy the space between the driver and front passenger, allowing the area where the gear shift lever would normally be to be designed as a storage compartment or cup holder.

16

3

Share

What to Do When the Battery of Haval H6 Dies?

Here are the solutions for a dead battery in Haval H6: 1. Push-start: Push-starting is the most effective emergency starting method, but it is a last resort and should not be used frequently, as it can cause certain damage to the engine and clutch. This method should especially be avoided for automatic transmission vehicles. 2. Towing-start: The method and principle of towing-start are similar to push-starting, but using another vehicle for towing is much more convenient and less labor-intensive. When implementing this method, use a tow rope of appropriate length and ensure both ends are securely fastened. Before towing, the drivers of both vehicles should agree on communication signals, such as using a horn or hand gestures to indicate starting and stopping, to ensure coordinated actions. 3. Jump-start: If there is another vehicle available with jumper cables when the battery dies, the jump-start method can be used to start the vehicle. During the operation, bring the two vehicles close enough so that the jumper cables can connect the positive and negative terminals of both batteries. Ensure that the two vehicles do not come into contact, and only use cables with sufficient load capacity and insulated sheathing.

17

2

Share

Where are the airbags located in the Geely Boyue Pro 2020 model?

How to Avoid Driving Blind Spots?

Which Button to Press When Car Windows Fog Up?

What is the difference between BMW with Li and without Li?

How to Add Windshield Washer Fluid?

What is the gear shift lever called?

What to Do When the Battery of Haval H6 Dies?

What does Audi S line mean?

How to Turn on the Fog Lights of the Volkswagen Lamando?

Which country produces Toyota cars?

Where is the Tire Pressure Monitoring on the Buick Verano?