···
Log in / Register

Where are the 5 points deducted in Subject 2?

6Answers
DelLucia
07/23/2025, 09:21:54 PM

Stopping midway during the reversing into garage and parallel parking tasks will result in a 5-point deduction. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviated term for the field driving skills test subject. Small vehicle C1/C2 Subject 2 test items: Includes five mandatory tests: reversing into garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curve) (some regions also include a sixth item: high-speed toll card collection). Large vehicle A1/A2/A3/B1/B2 Subject 2 test items: Includes pile test, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, curve driving, right-angle turns, passing through a width-restricted gate, passing through continuous obstacles, driving on bumpy roads, narrow road U-turns, as well as simulations for highways, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

Was this review help?
101
Share
McElena
08/10/2025, 04:45:20 PM

When I took the driving test for Subject 2, the most common 5-point deduction occurred due to incorrect positioning during the hill-start parking. The examiner said the wheels must stop within 30 centimeters of the white line. If the deviation was too large, points would be deducted—for example, stopping too far back or too far forward could easily cause the car to roll back when starting. Another common mistake was forgetting to turn on the turn signal when starting, which directly resulted in a 5-point deduction. Although this didn’t affect passing overall, accumulating such mistakes was risky. During my test, due to nervousness, I parked crookedly on the hill the first time and lost points, but I quickly adjusted my mindset. My advice is to practice the hill-start section more, using markers to assist with positioning, and develop the habit of always checking the turn signal and position before starting—this reduces small errors, ensuring safety and peace of mind.

Was this review help?
16
Share
Expand All
DeEmily
09/23/2025, 11:04:28 PM

In many driving tests, the 5-point deductions in Subject 2 are usually due to minor oversights. For example, failing to signal before starting, or having the wheels more than 30 centimeters from the control line during hill parking. Pausing too long during operations, such as stopping for more than two seconds while reversing into a parking space, will also result in deductions. I've seen some trainees lose points because their seats weren't adjusted properly or they failed to check the rearview mirrors. These mistakes may seem small, but accumulating 5 points can affect the overall score. In real driving, these habits relate to safety. It's recommended to participate in more mock tests, focus on strengthening weak areas, ensure every step is executed correctly, and cultivate good driving habits.

Was this review help?
3
Share
Expand All
JulietteAnn
11/07/2025, 12:14:32 AM

The most common 5-point deduction in Subject 2 is inaccurate parking on the slope, requiring the wheels to stop within 30 cm of the marking line, with large deviations resulting in point deductions. Or failing to signal when starting, losing points immediately with that action. During my test, I lost points due to incorrect parking position, but later practiced more diligently; other mistakes like exceeding the time limit for stopping midway are also easy to make. Remember to practice positioning more and develop standardized operation habits in daily practice.

Was this review help?
7
Share
Expand All
AdrielLynn
12/28/2025, 02:01:55 AM

In the driving test subject two, there are many instances where 5 points are deducted, such as inaccurate positioning when stopping on a slope, where the wheels are required to stop within the line but deviate significantly, commonly resulting in a 5-point deduction. Or forgetting to turn on the turn signal before starting the vehicle, which is also a standard point deduction. My experience is that these small mistakes accumulate and pose a high risk; it is recommended to adjust the seat and fasten the seatbelt before the test, and to frequently check the rearview mirrors during operation. Paying attention to these details in daily driving not only ensures a smooth test but also enhances everyday safety.

Was this review help?
11
Share
Expand All
LaMila
03/25/2026, 10:05:48 PM

In the driving test (Subject 2), the 5-point deductions often involve safety-related details. For instance, during the hill-start exercise, wheels must stop within marked boundaries - exceeding them costs 5 points. Failing to activate turn signals when starting also deducts 5 points. These errors serve as exam warnings to reinforce proper procedures. I recommend focused practice on challenging maneuvers: perfect hill positioning and consistent signal use during starts. This reduces point losses, improves pass rates, and builds habits for lifelong safe driving - making roads safer through disciplined routines.

Was this review help?
17
Share
Expand All
More Q&A

What is the fuel tank capacity of the 2018 Geely Emgrand in liters?

The 2018 Geely Emgrand has a fuel tank capacity of 55 liters. Generally, small cars have a fuel tank capacity of 35-45 liters, while mid-size cars have a fuel tank capacity of around 55-75 liters. The following is an introduction to the fuel tank: Fuel tank capacity: Generally, small cars have a fuel tank capacity of 35-45 liters, while mid-size cars have a fuel tank capacity of around 55-75 liters. A full tank of fuel usually allows the car to travel approximately 500 kilometers. The size of the fuel tank depends on the car's displacement and fuel consumption—cars with higher fuel consumption have larger tanks, while those with lower fuel consumption have smaller tanks. The design of the fuel tank capacity generally allows for a range of 400-600 kilometers. Lighter cars with smaller displacements have correspondingly smaller fuel tank capacities, while heavier cars with larger displacements naturally have larger fuel tank capacities. However, the maximum range on a full tank is mostly between 400-600 kilometers. Fuel tank capacity measurement unit: Internationally, the standard unit for measuring fuel tank capacity is liters (L). Different countries also have their own standards for fuel tank capacities.
117
Share

What is the fuel consumption of a 250cc motorcycle?

250cc motorcycles typically have an actual fuel consumption ranging from 2.5 to 3.2 liters per 100 kilometers. Additional details are as follows: 1. Introduction to Fuel Consumption: Fuel consumption refers to the amount of fuel consumed by a vehicle over a distance of 100km. The economic performance of a vehicle is primarily indicated by its fuel consumption, which is a crucial aspect of vehicle usability. Fuel consumption parameters include steady-speed fuel consumption and cycle fuel consumption. Steady-speed fuel consumption is a measure of fuel efficiency when a vehicle travels at a constant speed on good road conditions. Road cycle fuel consumption is determined by driving the vehicle on roads according to specified speed and time protocols in repeated cycles, also known as multi-condition road cycle fuel consumption. 2. Factors Affecting Fuel Consumption: Fuel consumption is influenced by the type of vehicle, number of cylinders, year of manufacture, driving habits, and road conditions. For example, a domestic single-cylinder 250cc or a Japanese V2 twin-cylinder 250cc motorcycle has a combined fuel consumption of about 3.5 liters per 100 kilometers. For an inline 4-cylinder 250cc motorcycle, such as the Hornet or CBR250, the combined fuel consumption is approximately 5 liters per 100 kilometers under normal driving conditions, and around 6 liters under aggressive driving.
117
Share

Why does a Toyota vehicle automatically sound the alarm?

Toyota vehicle automatic alarm may be caused by unfastened seat belts, unclosed doors, abnormal low-pressure buzzing, or overheating water temperature. The specific reasons for Toyota vehicle automatic alarm are as follows: Unfastened seat belts: The driver did not fasten the seat belt after getting into the vehicle. Unclosed doors: When the vehicle is stationary, the door open signal triggers the indicator light to illuminate. During driving, if the door open signal is triggered, the indicator light stays on continuously, and the buzzer alarms. Abnormal low-pressure buzzing: (For air brake models) The low-pressure buzzer for air brakes keeps sounding. Under normal conditions, the pressure indicated on the pressure gauge should not be lower than 600 kPa. When the engine is running at 75% of the rated power speed, the indicated pressure on the pressure gauge should rise from zero to the starting pressure (400 kPa) within 4 minutes, and the low-pressure alarm buzzer should stop alarming. Overheating water temperature: The overheating water temperature alarm buzzer sounds intermittently, beeping for 0.5 seconds and pausing for 0.5 seconds. Note the priority: the low-pressure alarm buzzer sounds first, followed by the overheating water temperature alarm buzzer.
112
Share

What causes difficulty in engaging first gear in Wuling Hongguang?

Difficulty in engaging first gear is typically caused by a clutch malfunction, specifically insufficient clutch disengagement travel, which results in incomplete clutch separation and prevents gear engagement. Common clutch malfunctions and their solutions include: clutch slippage, incomplete clutch separation, and shuddering during startup. The automotive clutch is located within the flywheel housing between the engine and transmission, secured to the rear plane of the flywheel with screws. The output shaft of the clutch serves as the input shaft for the transmission. Solution: The driver can depress or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby interrupting or transmitting power from the engine to the transmission. Procedure for starting in first gear: To start in first gear, first fully depress the clutch pedal, shift into first gear, then gradually release the clutch while applying slight throttle to initiate vehicle movement. Manual transmission vehicles utilize a manually operated gearshift mechanism (also known as manual transmission, MT) to regulate vehicle speed. This involves manually moving the gear lever to alter gear meshing positions within the transmission, changing gear ratios to achieve speed variation. The gear lever can only be operated when the clutch is depressed. Function of the clutch: The clutch serves to gradually connect the engine and transmission for smooth vehicle starting, temporarily disconnect them to facilitate gear shifting and reduce shift shock, and provide disengagement during emergency braking to prevent transmission system overload, thereby offering protective functions.
101
Share

What is the reason for the mileage meter of Wuling Zhiguang not working?

If the mileage meter of Wuling Zhiguang is not working, it depends on what type of meter it is. If it is an electronic mileage meter, it is likely that the fuse is blown. If it is a mechanical mileage meter, it is probably due to a loose connection. The following methods can be used to diagnose the fault if the speedometer and mileage meter are not working: Determine whether it is a sensor or instrument fault: Lift the left front wheel of the car, do not turn on the ignition switch, and manually rotate the left front wheel. Use a special test connector VAG1598/4 and a multimeter to measure the resistance between electrodes 2 and 3 on the sensor connector. The resistance should fluctuate between 0 and n. Determine whether it is an instrument or wiring fault: Remove the instrument panel without unplugging the connector. Use a multimeter to measure the three electrodes on the instrument. Turn on the ignition switch, and the voltage from fuse No. 26 to the power line of the speedometer should be 12V to ground. Use the multimeter's resistance mode to measure, the resistance of the pulse signal line from the instrument to the sensor connector should be zero, and the resistance of the ground electrode to ground should be zero.
117
Share

Which country's brand is Skoda?

Skoda (SKODA) is one of the classic brands of Volkswagen AG in Germany, headquartered in Mladá Boleslav, Czech Republic, and is one of the four oldest car manufacturers in the world. Its models include Octavia, Olya, Fabia, Fabia, Superb, and Superb. The huge circle symbolizes Skoda's impeccable products for the world. The bird's wings symbolize the marketing of technologically advanced products worldwide. The arrow flying to the right symbolizes advanced craftsmanship, and the vermilion-black color in the outer ring symbolizes Skoda's century-old tradition. The central green color expresses Skoda's emphasis on resource recycling and environmental protection. The laurel leaves at the bottom of the current Skoda Freesia car logo represent victory. Important milestones in Skoda's development are as follows: In April 2005, ŠKODA AUTO began cooperation with Shanghai Volkswagen Automotive Co., Ltd., marking the beginning of Skoda's journey in China. In September 2006, the ŠKODA brand was officially launched, announcing its Chinese name "Skoda Auto". On December 22, 2008, Skoda's second model, the Fabia, officially entered the Chinese market. On June 20, 2013, the Skoda brand initially completed its product lineup in China, consisting of the Octavia, Fabia, and Superb, covering the A0, A, and B-segment markets in China's automotive market.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.