···
Log in / Register

When was the Jetta discontinued?

1Answers
MacEmma
08/29/2025, 01:16:27 AM

The Jetta has not been discontinued; it has simply become an independent brand under Volkswagen, with changes in the models produced. Taking the Jetta VS5 as an example, it is a 5-door, 5-seat compact SUV with body dimensions of 4419mm in length, 1841mm in width, and 1616mm in height, with a wheelbase of 2630mm. The Jetta VS5 is equipped with a 1.4T turbocharged engine and a 5-speed manual transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. It features a front-wheel-drive layout, with a front suspension using a MacPherson independent suspension and a rear suspension using a multi-link independent suspension.

Was this review help?
103
Share
More Q&A

Why do electric vehicle tubeless tires always lose air suddenly?

Tubeless tires rely on the tire bead for sealing. If the air pressure inside the tire is insufficient, air leakage will occur. Inflating the tire to the proper pressure level can create adequate sealing before use. Below is relevant information about tubeless tires: 1. Introduction: Tubeless tires, also known as 'low-pressure tires' or 'pneumatic tires', are inflatable tires without inner tubes. In recent years, tubeless tires have seen increasingly widespread use on motorcycles, passenger cars, buses, and trucks. 2. Performance: Tubeless tires feature high elasticity and wear resistance, along with excellent traction and heat dissipation properties. Particularly for all-steel radial tubeless tires, due to their economic durability, they have been promoted to the logistics and transportation industry by the National Economic Commission and the China Tire Association.
104
Share

What are the causes of electric vehicle insulation failure?

Electric vehicle insulation failure occurs due to the following reasons: 1. Cause: Insulation failure is caused by leakage of the electrolyte inside the battery, leading to liquid seepage. When the liquid seeps to a certain extent, the insulation layer is damaged, creating a conductive circuit between the battery modules and cells, which triggers the fault warning. If only one point of insulation fails in the system, it may not have an immediate significant impact, but multiple points of insulation failure can cause leakage current to flow between these points, potentially leading to a fire. 2. Solution: Handling insulation failure is complex. Operators must wear protective equipment that meets national safety standards, such as insulated gloves and insulated shoes. When insulation failure occurs, the faulty battery pack usually needs to be replaced. In cases of multiple insulation failures, the entire battery may need to be replaced.
120
Share

What does it mean when the SVS light is on?

The SVS light in a car is similar to the engine malfunction indicator light. When the SVS light is illuminated, it indicates that the engine control unit has detected an erroneous signal from a sensor or that the sensor has exceeded its operational standards. More information about the SVS indicator light is as follows: 1. When the ignition is turned on, the SVS light will illuminate for an automatic check and will turn off after a few seconds. 2. If the SVS light remains on, you can check whether the engine starts normally. If it does, this can rule out issues with the fuel pump. If the engine fails to start normally, you should immediately take the car to a professional auto repair shop for sensor maintenance.
116
Share

How Often Should Gear Oil Be Changed in Electric Vehicles?

Electric vehicle gear oil needs to be replaced every two years. Below is more information about gear oil: 1. Function: Gear oil mainly refers to the lubricating oil for transmissions and rear axles. It differs from engine oil in terms of usage conditions, composition, and performance characteristics. Gear oil primarily serves to lubricate gears and bearings, prevent wear and rust, and assist in heat dissipation for gears. 2. Description: Gear oil should have excellent anti-wear and load-bearing properties, along with appropriate viscosity. Additionally, it should possess good thermal oxidation stability, anti-foaming properties, water separation capabilities, and rust prevention. 3. Classification: Gear oil is divided into two categories: automotive gear oil and industrial gear oil. The former is used to lubricate various manual transmissions and gear drive shafts in vehicles, while the latter is used for lubricating gear mechanisms in industries such as metallurgy, coal mining, cement production, and chemical processing.
116
Share

What are the symptoms of a bad alternator pulley?

When the alternator pulley fails, it will cause abrupt acceleration/deceleration without cushioning effect, produce abnormal noises during startup, and make rattling sounds even with light throttle input. If these symptoms occur, please immediately visit a 4S shop for inspection, repair or replacement. Below are maintenance measures for automotive alternators: 1. Monitor bearing wear: If insufficient lubrication is found, add a few drops of engine oil through the oil cup opening, being careful not to let it seep into the rectifier as this would affect electrical transmission. 2. For uneven brush contact surfaces: Smooth them with fine sandpaper. Replace brushes when spring elasticity is insufficient or brushes are excessively worn. For undamaged but overly short brushes: Insert shims into the holder to ensure proper contact with the rectifier. 3. Keep the alternator's dust cover secure: Never remove it as this prevents dust ingress that could cause mechanical failures.
109
Share

What Are the Misconceptions About Fully Charging and Discharging Electric Vehicles?

Misconceptions about fully charging and discharging electric vehicles are as follows: 1. Avoid overnight charging: Charging for more than or close to 12 hours can cause significant damage to the battery. Firstly, it may lead to overcharging, causing the battery to swell and reducing its lifespan. Secondly, it may cause overheating of electronic components in the charger, increasing the risk of short circuits and sparks, which could ultimately lead to a fire. 2. Pay attention to the brand of the charger: Chargers for electric vehicles are not universal. Even if they are all 48V chargers, the shape of the output terminals and the polarity may differ, and the charging current may vary. Using a 2.5A charger for a 10 or 12AH battery can result in too high a charging current, damaging the battery. 3. Avoid using fast charging stations: Long-term use can also cause the battery to swell, affecting its lifespan, so it is best to avoid them whenever possible.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.