···
Log in / Register

What to Do When Vehicle Penalty Points Exceed Three Driver's Licenses?

6Answers
McElaina
08/27/2025, 01:30:13 AM

Introduction to Measures for Vehicle Penalty Points Exceeding Three Driver's Licenses: The new traffic law stipulates that a single vehicle can only be linked to a maximum of three driver's licenses to clear violation records, and one driver's license can clear violations for up to three vehicles. If exceeded, the traffic management network will directly lock the driver, who must then present their license at the vehicle management office or traffic police center for inspection. Below are common traffic violations: 1. Running a Red Light: This is the most common violation. Since the introduction of the new traffic regulations, running a red light results in a 6-point deduction. 2. Driving Without a License: If a driver continues to drive while their license is suspended, they will face a fine and 15 days of detention. Driving without obtaining a driver's license or driving with a revoked license will result in 15 days of detention and a fine. 3. Overloading or Overcrowding: For passenger vehicles exceeding the rated capacity by less than 20% or freight vehicles exceeding the rated load by less than 30%, a fine will be imposed. For passenger vehicles exceeding the rated capacity by 20% or freight vehicles exceeding the rated load by 30%, a fine will be imposed. 4. Drunk Driving: Driving under the influence of alcohol will result in a 3-month suspension of the driver's license and a fine. Driving a commercial vehicle under the influence will also result in a 3-month suspension and a fine. 5. Speeding: Driving 50% over the speed limit will result in a fine and revocation of the driver's license.

Was this review help?
107
Share
StDaniella
09/09/2025, 12:28:14 AM

I've experienced this a few times, after all, I've been driving for almost 30 years. If you exceed the demerit points by 3, you must go to the traffic management office immediately to handle it, otherwise your driver's license will be suspended. In the past, I exceeded the points because I rushed through a yellow light too quickly, resulting in having to attend a safety training class and take a test to clear the points. The whole process took about two days, and I had to take half a day off work. The key point is that you can't have someone else take the demerit points for you - the crackdown is strict now, and getting caught would be even more troublesome. Usually, I recommend paying more attention to speed limit signs, setting up overspeed alerts on your phone app, checking your vehicle's condition before each trip to avoid brake issues causing accidents. Also, check your points regularly - you can view them on the Traffic Management 12123 app. Don't wait until you've exceeded the points to panic. Develop good habits, safety first, to avoid all this hassle.

Was this review help?
1
Share
Expand All
PiperLee
10/23/2025, 01:17:18 AM

As a new driver who just got my license a year ago, I was almost scared to death by my last point deduction. Turns out accumulating over 3 points means you'll be called in for traffic education. When my friend took me to report at the traffic police station, the line was incredibly long. The whole process involves taking a test with questions about traffic rules and safety knowledge, like speed limits and no-parking zones. I've learned my lesson now - I use navigation apps for real-time speed alerts while driving to reduce red-light running or speeding. By the way, multiple point deductions can also affect your insurance premium, increasing it by several hundred dollars next year. Before each trip, I check my vehicle lights and point status to avoid exceeding limits. Nowadays, mobile apps are very convenient, allowing notification settings that have saved me a lot of worry.

Was this review help?
10
Share
Expand All
DelMax
12/06/2025, 12:41:08 AM

My husband wasn’t careful while driving last time and got over three penalty points. I urged him to deal with it immediately. According to our neighbor, such matters require reporting to the local DMV, attending a safety course, and passing a test to clear the points. I accompanied him, and the course covered basic safety knowledge—the test was easy, taking only half an hour. Don’t delay too long, or temporary parking violations could make things worse. I also noticed that car lights need regular maintenance; replace dim ones early to avoid penalties for poor visibility at night. When I’m in the passenger seat, I always remind him to drive steadily, keeping speed under 60, especially on rainy days. This ensures our family’s safety and saves on fines.

Was this review help?
5
Share
Expand All
MariaLynn
01/26/2026, 02:00:35 AM

From a regulatory perspective, exceeding the demerit point limit means the accumulated violation points on your driver's license are too high. If you exceed 3 points, you must follow the legal process. First, go to the nearest vehicle management office to submit your documents and schedule a traffic law refresher course. After passing the written test, your points will be cleared. Don't consider buying points to avoid penalties—such practices are prohibited by law, and if discovered, your license will be revoked immediately. Additionally, review your daily driving habits, such as frequent lane changes without signaling or speeding, which can easily lead to accidents and demerit points. It's advisable to regularly check your demerit point records on your phone using apps like Traffic Management 12123 to monitor in real time and develop good habits. Also, ensure regular vehicle safety inspections to confirm that lights and brakes are functioning properly, preventing potential risks.

Was this review help?
20
Share
Expand All
MilaFitz
04/22/2026, 12:26:07 AM

As a working professional always in a rush, dealing with excessive demerit points on my driver's license is such a headache. Last time when I went to handle the over-limit points, I realized it required spending a whole weekend on mandatory traffic education - the test content was simple but time-consuming. The solution is to promptly report to the traffic police station to clear points instead of waiting until more accumulate and risk license suspension. Daily prevention is crucial. I've developed habits using smart devices: installed Bluetooth speed detectors in-car for speed limit alerts, and navigation apps that automatically plan routes with lower violation risks. Before driving, I check traffic apps for recent violations to avoid repeating offenses like crossing solid lines or failing to yield to pedestrians. Also, never drive when fatigued as distracted attention leads to mistake-prone driving and more points. Cultivating these self-discipline tips makes daily life smoother.

Was this review help?
12
Share
Expand All
More Q&A

What is the torque specification for cylinder head bolts on an all-aluminum engine?

The torque specification for cylinder head bolts on an all-aluminum engine is 100 N·m. Here are the relevant details: 1. Definition: Torque is a crucial parameter of engine performance, referring to the average moment of force output from the crankshaft during engine operation, commonly known as the engine's "rotational force". 2. Function: The greater the torque, the more "power" the engine can output, resulting in faster changes in crankshaft speed, as well as improved vehicle climbing ability, starting speed, and acceleration performance. 3. RPM Range: Maximum torque is only achieved at a specific RPM or within a certain RPM range, which is indicated when specifying the maximum torque value along with its corresponding RPM or RPM range.
105
Share

What is the normal fuel rail pressure for the Geely Borui?

Geely Borui's normal fuel rail pressure is between 300kpa and 350kpa. Other models: Depending on the model, gasoline pressure may vary. Generally, as long as it is around 300kpa, it is considered normal, which is approximately 0.3MPa. Measurement method: Turn on the ignition switch to operate the electric fuel pump. The fuel pressure at this time should meet the technical requirements, generally fluctuating around 0.3MPa. Clamp the return hose, and the reading on the fuel pressure gauge will be the maximum fuel supply pressure of the pump. This value should comply with the model's technical requirements, usually 2 3 times the working oil pressure, i.e., 0.5 0.75MPa.
112
Share

Where is the Corolla condenser located?

Corolla condenser is located behind the engine. Introduction to condenser: The condenser is a component of the air conditioning system that can quickly transfer heat from the tubes to the air near the tubes. Most are placed in front of the car radiator, which is a device that converts gas or steam into liquid. After being throttled by the throttle valve, it becomes a low-pressure liquid and is sent into the evaporator, where it absorbs heat and evaporates into low-pressure steam to complete refrigeration. Function of condenser: To dissipate heat and cool down the high-temperature and high-pressure gaseous refrigerant discharged from the compressor, condensing it into medium-temperature and high-pressure liquid refrigerant.
117
Share

What is the reason for the BMW X1 reversing distance lines not displaying?

BMW X1 reversing distance lines not displaying reasons are as follows: Camera malfunction: There is an issue with the camera, internal components are damaged, and a new camera needs to be purchased for replacement. Power disconnection: The power supply to the camera is loose or detached, simply reinserting and securing the power plug may resolve the issue. Wiring problems: This is the most common issue. Since the reversing camera wiring harness runs from the dashboard all the way to the trunk, the lengthy route makes it likely for a loose connection at some point along the harness or plug, requiring thorough inspection of the wiring.
119
Share

What is the difference between the Mercedes-Benz G500 with 4.0L and 5.5L displacement?

Mercedes-Benz G500 with 4.0L and 5.5L displacement has the following differences: Different power: The 4.0T turbocharged engine has a maximum power of 310kw/5250rpm, while the 5.5T has a maximum power of 216kw/5500rpm. Different torque: The 4.0T has a maximum torque of 610N.m/2000-4750rpm. The 5.5T has a maximum torque of 456nm/2800-4000rpm. Different road adaptability: The 4.0T is more suitable for daily urban driving, while the 5.5T is more suitable for highways.
117
Share

Does the Baojun 510 have a reverse radar?

Baojun 510 has a reverse radar. The role of the reverse radar: The reverse radar is a safety auxiliary device when the car is parked or reversed. It can inform the driver of the surrounding obstacles through sound or more intuitive display, eliminating the troubles caused by the driver's inspection of the front, rear, left, and right when parking, reversing, and starting the vehicle, and helping the driver to eliminate the blind spots and blurred vision. The main functions of the reverse radar: Accurately measure the distance between the rear of the car and the nearest obstacle; when reversing to the limit distance, it can emit a rapid warning sound to remind the driver to pay attention to braking; it can repeatedly emit a voice warning sound to remind pedestrians to pay attention
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.