What to Do When the Rear Air Conditioning in Lexus Doesn't Blow Air?

1 Answers
AubreeLynn
07/30/25 7:32am
The solution for the rear air conditioning in Lexus not blowing air is to switch the air mode to the face vent mode, adjust the knob at the rear air conditioning unit, and adjust the air vents. In other modes, the rear air conditioning blows very little air and doesn't have much effect. Relevant information about car air conditioning is as follows: 1. Introduction: The car air conditioning device (air-conditioning-device), referred to as car air conditioning. 2. Function: It is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to the optimal state, providing a comfortable riding environment for passengers and reducing travel fatigue; it creates good working conditions for the driver and plays an important role in ensuring safe driving as a ventilation device.
Was this review help?
5
3
Share
More Forum Discussions

What to Do When a Tire Has a Bulge?

Tire bulging must be addressed immediately by visiting a professional tire shop for inspection and replacement; continued use is strictly not recommended. A bulging tire not only affects driving performance but also poses a significant risk of blowout, making it a major safety hazard. Most cases of tire bulging are caused by improper handling, with very few instances resulting from manufacturing defects. As one of the most critical components of a vehicle, car tires are in direct contact with the road surface. Together with the suspension system, they help absorb shocks during driving, ensuring a comfortable ride and smooth operation. They also maintain good traction between the wheels and the road, enhancing the vehicle's traction, braking, and off-road capabilities, all while bearing the weight of the car.
13
5
Share

Where to Add Windshield Washer Fluid for the Ford Everest?

The windshield washer fluid for the Ford Everest is added through the filler port located in the engine compartment. The container with a blue cap featuring a windshield spray symbol is the washer fluid reservoir. Open the reservoir cap and pour in the washer fluid, taking care not to overfill it. The Ford Everest is an ORV (Off-Road Vehicle) with a body-on-frame construction. It measures 4,892 mm in length, 1,862 mm in width, and 1,837 mm in height, with a wheelbase of 2,850 mm. In terms of exterior design, the Everest features a front fascia adorned with large chrome accents, a sharply contoured bumper, and an oversized inverted trapezoidal grille. Its body maintains the rugged, muscular styling typical of American SUVs, exuding a strong off-road presence.
1
2
Share

Where is the handbrake of the Mercedes-Benz C200L located?

The handbrake of the Mercedes-Benz C200L is located on the right side of the driver's compartment, specifically the button below the key insertion point under the steering wheel, marked with a 'P' inside a circle. The function of the handbrake is to lock the vehicle's drive shaft or wheels when parked to prevent the car from rolling. The electronic handbrake operates by activating the parking switch, which engages a motor to drive a steel cable or similar mechanism that connects to the rear wheel brake calipers, pressing the brake pads to achieve the parking function. The dimensions of the Mercedes-Benz C200L are 4783mm in length, 1810mm in width, and 1442mm in height, with a wheelbase of 2920mm. The front bumper of this model features silver trim, paired with a highly dynamic and personalized AMG front apron, while the rear is equipped with a newly designed bumper.
20
0
Share

Is Vehicle and Vessel Tax Paid Annually for Cars?

Vehicle and vessel tax must be paid annually for cars. Below are the specific details about vehicle and vessel tax: Definition of Vehicle and Vessel Tax: Vehicle and vessel tax is a type of tax levied on the owners or managers of vehicles and vessels (hereinafter referred to as "vehicle and vessel"), with vehicles and vessels as the taxable objects. The term "vehicle and vessel" here refers to those that are required by law to be registered with the vehicle and vessel administration departments. In China, the applicable tax rates are implemented in accordance with the "Vehicle and Vessel Tax Item and Tax Rate Table." Payment Deadline: Vehicle and vessel tax must be paid every year, and late payment will incur a late fee. There is no specific deadline for payment each year. Calculation Method: Across China, vehicle and vessel tax is calculated based on engine displacement and vehicle type. The higher the engine displacement, the higher the vehicle and vessel tax.
9
3
Share

Are there any differences between the 2009 and 2010 Audi models?

Audi 2009 and 2010 models only differ in body materials and configurations. Introduction to the Audi A6L: The Audi A6L was the first Audi model to enter the Chinese market, with its predecessor being the third-generation Audi 100 (code-named C3) introduced in China in 1988. Body structure of the Audi A6L: The new Audi A6L is closer to Audi's flagship model, the Audi A8, in terms of body lightweight technology. The new Audi A6L adopts a steel-aluminum composite body structure, extensively using aluminum sheets, aluminum profiles, aluminum castings, and hot-formed steel, including body panels. Key components such as the front suspension strut towers, suspension tower reinforcement bars, front and rear suspension structural parts, and front and rear bumper crash beams all utilize aluminum parts with different processing techniques, significantly reducing the weight of the body, including doors and hoods.
11
5
Share

What is the method for shifting gears in a manual transmission?

Method for shifting gears in a manual transmission: 1. Start in first gear, then shift to second gear after driving a few meters; 2. Shift to third gear when the speed reaches above 20 mph and below 35 mph; 3. Shift to fourth gear when the speed reaches above 35 mph and below 45 mph; 4. Shift to fifth gear when the speed exceeds 45 mph. For vehicles with six or more gears, shift up one gear for every additional 15 mph increase in speed. Additionally, monitor the engine RPM during gear shifts and shift promptly when it reaches around 2500 RPM. A manual transmission, also known as a manual gearbox, requires the driver to manually move the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed variation. Working principle of manual transmission: The shift fork changes the gear ratio of the meshing gears, thereby adjusting the driving torque to suit different operating conditions.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.