···
Log in / Register

What Can Completely Remove Engine Oil?

6Answers
MacGeorge
07/29/2025, 09:41:53 PM

To completely remove engine oil stains from clothes, the most effective method is to use alcohol for cleaning. According to the principle of 'like dissolves like,' alcohol can not only dissolve the organic compounds in engine oil but also mix with water, making it the optimal choice. Additionally, higher concentrations of alcohol yield better cleaning results, so anhydrous alcohol is recommended. Relevant information about engine oil is as follows: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber in engines. It is often referred to as the 'blood' of a car. 2. Composition: Engine oil consists of base oil and additives. The base oil is the primary component of lubricating oil, determining its basic properties, while additives compensate for and improve the shortcomings of the base oil, imparting new characteristics, making them an essential part of lubricating oil.

Was this review help?
114
Share
Lynne
08/15/2025, 03:29:26 AM

Oil stains are quite annoying. When I used to work in the workshop, I often used gasoline or diesel to clean them. Pour it on a rag and scrub hard, and it will be clean, but you have to keep away from fire sources as these are flammable. Carburetor cleaner also works well—spray it on, wait a few minutes, and wipe it off, but the smell is strong. If your hands get stained with oil, mixing laundry detergent with sand and scrubbing works great, though it can be a bit rough on the skin. For oil spots on clothes, apply dish soap directly, scrub, and then wash as usual. But don’t use gasoline on car paint surfaces—it can damage the finish. Finally, rinse with soapy water to completely remove the smell.

Was this review help?
3
Share
Expand All
GenevieveLee
10/20/2025, 04:37:37 AM

I've tried using household items to remove engine oil, and a mixture of dish soap and water works quite well as a cleaner. For clothes stained with oil, immediately sprinkle some flour to absorb the oil, rub it in, and then rinse with warm water. For oil stains on the ground, first cover them with cat litter to absorb the oil, sweep it away, then pour hot water mixed with baking soda and scrub twice with a stiff brush for a clean finish. For grease on metal tools, soak them in white vinegar for half an hour, and a quick scrub with a steel wool pad will make them shine. If it's on plastic parts, wiping with alcohol pads is most effective, but remember to rinse with clean water afterward to prevent surface corrosion.

Was this review help?
9
Share
Expand All
JuniperFitz
12/03/2025, 09:21:28 PM

Don't panic when discovering oil stains—ordinary soap works. For skin contact, immediately scrub with dish soap under running water. For stubborn stains, apply olive oil to dissolve the engine oil before washing. For clothing, cover oil spots with cornstarch to absorb the oil before normal washing. Metal parts can be boiled in hot water for ten minutes to soften the oil for easy scrubbing. The key is to act promptly—dried oil is much harder to clean.

Was this review help?
16
Share
Expand All
Juan
01/23/2026, 10:44:56 PM

There are specialized engine cleaners that work particularly well on oil stains. Just spray them on to emulsify the grease and rinse with water directly. Diesel fuel also works but has a pungent odor. Carburetor cleaners are suitable for stubborn oil stains. If your hands get oily, apply moisturizer first to lubricate, then wash with hand soap. Soaking tools in kerosene for half an hour will make the grease float up. After cleaning the surface, spray rust inhibitor to prevent metal from rusting.

Was this review help?
20
Share
Expand All
Castillo
04/19/2026, 10:01:19 PM

The foam-type degreaser from car washes is the most effortless solution for engine oil—just spray and rinse. Kitchen cleaners can also remove oil from the bike frame. For greasy hands, mix sugar with hand soap for quick degreasing. For fresh oil stains on clothes, immediately cover them with salt powder to absorb the oil; for old stains, scrub with alcohol and baking soda water. Final reminder: Avoid using strong acid or alkaline cleaners, as they can damage rubber parts and car paint.

Was this review help?
16
Share
Expand All
More Q&A

How to adjust the 16 valves of a 4G15 engine?

Prepare the tools needed to adjust the valves of the 4G15 engine. Generally, tools such as wrenches and screwdrivers are required. Use a wrench to loosen the adjustment screws of the 4G15 engine. Use a screwdriver to turn the screw shaft of the 4G15 engine and lift the screw shaft upward with your fingers. After determining the correct position, use the wrench to tighten the adjustment screws of the 4G15 engine. Tighten the clearance nut of the intake valve of the 4G15 engine, and the valve adjustment is complete.
102
Share

How Do 4S Stores Handle Flood-Damaged Cars?

After purchasing the vehicles, intermediaries replace the damaged interior decorations, conduct inspections and repairs, then sell them as nearly-new cars to reap huge profits. Unscrupulous dealers acquire luxury cars from individuals, refurbish them, and mortgage them to banks. When the loans mature, the banks sell these vehicles to the second-hand market. There have been several cases of such cars being sold to consumers in the past, though the number has decreased in recent years. 4S stores have their internal staff absorb these vehicles. If the employees cannot handle them, they are then sold to the second-hand market or to friends and relatives.
113
Share

How to Repair a Dented Groove on a Car Door?

Align the traction pad coated with hot melt glue to the center of the dent and press it gently with your hand. After 3 to 5 minutes, align the center hole of the pull bridge with the shaft of the traction pad and set it in place. Apply even force to pull out the pad, gradually lifting the dent. First, clean the dented area thoroughly. Then, load the special glue into the glue gun and plug it in to preheat for about 7 minutes. For larger dents, use larger pads. Apply the melted glue evenly on the pad with the glue gun, quickly attach it to the dented area, and press gently until the special glue sets firmly before releasing.
106
Share

How to Deal with Foggy Car Windows at Night?

If the fog inside the car is not too heavy, opening the windows on both sides will create air convection inside the vehicle. Spray anti-fog solution onto the inner surface of the car windows and wipe it clean. This not only removes dirt from the glass but also forms a thin, transparent protective film on the surface. Most cars equipped with air conditioning have a defogging function. Simply press the defog button lightly. Mix dishwashing liquid with water (ratio of 1:6), apply it evenly to the car windows with a sponge, and wipe it clean with a car towel once dry, leaving no water stains.
104
Share

Is it serious if a piece of tire is missing?

A missing piece of tire poses a safety hazard and may cause a blowout. Here are some precautions for car tire usage: Bulging: If bulging occurs on the tire, it must be replaced immediately to avoid increasing the risk of a blowout. Tire lifespan: Tires are rubber products, which will age over time with prolonged use. Under normal conditions, tires installed on a car can last for four years. Regular pressure checks: During daily use, it's important to frequently check the tire pressure. Tire pressure should not be too high or too low. If the pressure is too high, it will reduce the contact area between the tire and the ground. If the tire pressure is too low, the tire may experience wave-like deformation during high-speed driving, increasing the risk of a blowout and potentially shortening the tire's lifespan.
118
Share

What causes the uneven height and inability to close the sunroof on the Tiguan?

Here are the specific reasons why the Tiguan's sunroof is uneven in height and cannot be closed: Aging and deformation of the sealing strip: The aging and deformation of the glass sealing strip causes resistance during the lifting of the glass, requiring timely replacement of a new sealing strip. If the aging is not severe, lubricant can be used for lubrication. Presence of foreign objects in the guide rail: Foreign objects, such as business cards or other debris inserted into the window when the vehicle is parked, may be present in the glass lifting guide rail, necessitating cleaning or removal of these objects. Malfunction of the lift mechanism: Symptoms of a faulty manual glass lift mechanism include slow lifting speed, weak motor performance, and glass tilting or coming off track.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.