···
Log in / Register

What to Do After a C1 Driver's License is Deducted 12 Points?

6Answers
Faith
07/24/2025, 10:36:48 AM

C1 driver's license accumulated deduction of 12 points or a one-time deduction of 12 points, within 15 days to the local public security organ traffic management department to participate in a 7-day subject one study, and then take the test, after passing the test, the points will be cleared, and the motor vehicle driver's license will be returned. The following behaviors will deduct 12 points at one time: 1. Driving a motor vehicle that does not match the permitted driving type. 2. Driving a motor vehicle after drinking alcohol. 3. Causing a traffic accident and escaping, which does not constitute a crime. 4. Using forged or altered motor vehicle license plates, driving licenses, driver's licenses, school bus signs, or using other motor vehicle license plates or driving licenses. 5. Driving a motor vehicle on the highway to reverse, go against the traffic, or cross the central divider to make a U-turn.

Was this review help?
105
Share
DelEva
08/10/2025, 03:03:20 AM

I remember when my driver's license was deducted all 12 points last year, I panicked. At that time, I had to go to the traffic police department first to handle it, and they would inform me to attend traffic safety education. The learning period usually lasts seven days, covering traffic regulations and safe driving, and sometimes it's quite strict—no late arrivals or early departures allowed. After that, I had to prepare for the Subject One exam. The question bank might be updated, so practicing a lot is crucial. I spent quite some time reviewing. Only after passing the exam could I get my license back, and the whole process might take over half a month. The cost was also a few hundred yuan, including education and exam fees. I advise everyone to strictly follow the rules while driving to avoid speeding or drunk driving, as going through the process again is troublesome and affects daily life.

Was this review help?
2
Share
Expand All
Lawson
09/25/2025, 02:50:01 AM

As a young driver who just got my license, I was really nervous when I lost all 12 points. The first thing was to report to the traffic police department, where they arranged for me to attend mandatory but quite boring classes. During the study period, I had to sign in daily, and after completion, I had to retake the theory test (Subject 1), which was slightly harder than the one at the driving school. If you fail, you have to repeat the course and test, wasting both time and money. A friend who went through a similar situation suggested bringing snacks to the learning center to avoid listening on an empty stomach. Don’t delay handling point deductions—address them promptly to avoid further complications. Pay attention to navigation alerts on your phone to prevent minor mistakes from snowballing into bigger issues. Driving safety is no small matter; it can’t be taken lightly.

Was this review help?
8
Share
Expand All
DeJanelle
11/08/2025, 09:09:36 PM

After deducting all 12 points, the focus should be on learning from mistakes. I remember the first step is to handle the matter with traffic police, then attend traffic regulation training courses to strengthen safety awareness. These seven days of study are crucial as they help drivers reflect on their driving habits. Next comes the subject one exam, and only after passing it can you retrieve your driver's license. The entire process emphasizes education over punishment, so it's important to adjust your mindset and avoid dwelling on frustration. It's recommended to use driving aids like dashcams in daily driving to reduce violation risks. Most point deductions result from minor oversights, so staying vigilant can prevent problems before they occur.

Was this review help?
7
Share
Expand All
OliviaDella
12/29/2025, 10:56:35 PM

When working at the auto repair shop, I often encounter drivers who have lost all their points coming to complain. They must first go to the traffic police station, then attend a training course and take an exam. I remind them to book a spot at the learning center early, as there can be long queues during peak periods. The pass rate for the Subject 1 exam is decent, but many fail due to inadequate preparation and have to retake it, wasting money. The process of renewing a driver's license is straightforward—just don't rush it. By the way, regular vehicle checks, especially on brakes, can help reduce the chance of violations. Safety first—develop good habits and avoid distracted driving.

Was this review help?
12
Share
Expand All
SiennaLee
03/27/2026, 01:12:51 AM

As a family driver, the responsibility is significant after deducting 12 points. You must first report to the traffic police department, then complete the study and examination. The seven-day study period is quite time-consuming and may affect work commutes. After passing the exam, the driver's license will be reinstated, and the entire process requires coordination with family support. Remind everyone not to accumulate penalty points, pay attention to traffic signals and speed limits while driving, especially slowing down in rainy weather. The cost of a few hundred yuan is not high, but the mental stress is considerable.

Was this review help?
6
Share
Expand All
More Q&A

What causes the car to not accelerate when stepping on the gas pedal?

If it only happens briefly during ignition, it might be due to severe engine carbon deposits where the fuel is absorbed by impurities, making it feel like no fuel is being added and causing difficulty in ignition. If the issue persists, it could be caused by excessive gum deposits blocking the fuel line or a malfunctioning fuel pump. In severe cases, cleaning is necessary, and it is also recommended to use fuel additives like MAFRA Multiway Tablets to help dissolve fuel gum, clean the fuel system, and promote safe combustion by removing engine impurities. Here’s how to properly step on the gas pedal: When driving uphill or downhill: Do not press the gas pedal all the way when going uphill. When using a low gear, it’s generally best to press the pedal halfway. Similarly, avoid fully depressing the gas pedal when climbing a slope. If the engine does not respond with increased RPM even after pressing the gas pedal three-quarters of the way while driving, shift to a lower gear and then press the gas pedal to accelerate. When starting the car: Do not press the gas pedal all the way when starting the engine. It’s better to keep it slightly above idle throttle. When starting off, it’s advisable to apply a small amount of throttle just before the clutch engagement point, with the throttle opening at a moderate level. Releasing the clutch should be coordinated smoothly with pressing the gas pedal, ensuring quick and precise movements.
112
Share

Is the Mercedes-Benz GLC domestically produced?

Mercedes-Benz GLC has domestic models, and it is a mid-size SUV. The following is the extended content about Mercedes-Benz GLC: Mercedes-Benz GLC Exterior: The new GLC long-wheelbase version continues the current design, still adopting an interior design similar to the C-Class, featuring classic dual-barrel instrument dials with red pointers and target-ring patterns. The minimalist wood-grain lacquered center console is paired with a 3-color adjustable ambient lighting system for the entire vehicle, equipped with an 8.4-inch high-resolution color display and a 13.97 cm color multifunctional instrument screen. Mercedes-Benz GLC Engine: The domestically produced Mercedes-Benz GLC uses two engines in total, one is a low-power 2.0-liter turbocharged engine, and the other is a high-power 2.0-liter turbocharged engine. The low-power 2.0-liter turbocharged engine has a maximum power of 145 kW, with a maximum torque speed ranging from 1,650 to 4,000 rpm, and a maximum power speed of 6,100 rpm. The high-power 2.0-liter turbocharged engine has a maximum power of 190 kW, with a maximum torque speed ranging from 1,800 to 4,000 rpm, and a maximum power speed of 6,100 rpm.
109
Share

How to Connect Bluetooth to Play Music in an Audi Car?

Audi car connection Bluetooth to play music method is: 1. First, turn on the Bluetooth of the matching mobile phone; 2. Turn on the car Bluetooth, press the multifunction key until the indicator light emits blue light; 3. According to the operation method of the mobile phone manual, set the Bluetooth mobile phone to search for Bluetooth devices; 4. After connecting Bluetooth, enter the phone interface and press the right corner button to enter the settings; 5. After opening the Bluetooth audio player option, press MEDIA to enter the media option. Taking the Audi A6 as an example, its body length, width and height are 5012mm, 1855mm and 1485mm respectively, which is a luxury car produced by Audi.
116
Share

Do Sedans Need to Warm Up in Winter?

Sedans need to warm up in winter, requiring idling for one minute before driving slowly. The reason is that immediately after ignition, the upper part of the engine lacks lubrication as oil has not yet circulated. It takes about 30 seconds after starting the engine for the oil pump to deliver oil to critical components such as pistons, connecting rods, and the crankshaft. When the vehicle starts, lubrication is not yet fully supplied during idling, making it prone to wear. Most engine component wear occurs within the first three minutes of a cold start. After sitting overnight, the lubricating oil on friction surfaces has largely drained away, leaving them without protective oil film.
115
Share

How to remove the maintenance wrench indicator on JAC Refine S3?

The method to remove the maintenance wrench indicator on JAC Refine S3 is: 1. Turn off the ignition switch; 2. Press and hold the adjustment rod at the lower right of the instrument panel; 3. Turn the ignition switch to the ON position; 4. After approximately 5 seconds, the maintenance indicator light will turn off, at which point you can release the adjustment rod. The JAC Refine S3 is positioned as a compact SUV, with body dimensions of 4345mm in length, 1765mm in width, and 1640mm in height, and a wheelbase of 2560mm. In terms of exterior design, the Refine S3 adopts a new design language, giving it high recognition and a fashionable appearance.
110
Share

What Causes One Side of Car Air Vents to Blow Cold Air While the Other Side Blows Hot Air?

The reasons for one side of car air vents blowing cold air while the other side blows hot air are as follows: Insufficient refrigerant: A common cause of temperature differences between the two sides of the air vents is insufficient refrigerant. When refrigerant is insufficient, the evaporation and heat absorption process of the liquid refrigerant entering the evaporator ends quickly, causing the evaporator to absorb heat and cool on the side where the refrigerant flows in, while there is no heat absorption on the side where the refrigerant flows out. As a result, only a small portion of the airflow sent by the blower is cooled, leading to temperature differences between the air from the two vents. By measuring the pressure in the high and low-pressure lines of the air conditioning system, you can determine if there is a refrigerant shortage, and adding refrigerant can resolve the issue. Low efficiency of the air conditioning compressor: If the air conditioning compressor is malfunctioning and operating at low efficiency, the liquefaction of the refrigerant will be insufficient. In this state, the refrigerant entering the evaporator will also have severely reduced heat absorption efficiency, leading to poor cooling performance, ultimately resulting in the airflow temperature from the vents failing to meet standards. Dirty condenser and evaporator: If the car air conditioning system is not cleaned for a long time, the condenser and evaporator can become covered with dust, lint, and other debris, weakening the refrigerant's effectiveness or reducing the heat absorption efficiency during the refrigerant's state changes. This prevents the air from being adequately cooled, ultimately causing temperature differences in the airflow from the various air vents.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.