What kind of engine oil is used for Mazda CX5?

1 Answers
DelAndres
07/29/25 4:04pm
Mazda CX5 uses fully synthetic engine oil. Engine oil can lubricate the engine, prevent metal parts inside the engine from rubbing against each other and damaging the engine. It also helps cool the engine, prevent corrosion and rust, seal to prevent leaks, and provide shock absorption, thereby protecting the engine. When choosing engine oil, it should be selected based on the requirements of the engine. Multi-grade oil is recommended as it is economical, long-lasting, and efficient, providing better protection for the engine. If the engine is in good condition and the seasonal temperature is low, it is advisable to use engine oil with lower viscosity to ensure smooth oil flow. In high-temperature seasons or when the engine is severely worn, using high-viscosity engine oil helps form an oil film and reduce engine wear.
Was this review help?
17
1
Share
More Forum Discussions

Is there an imported version of the Infiniti Q50?

There is an imported version of the Infiniti Q50. The Infiniti Q50 is a mid-size sedan launched by Infiniti, available in two powertrain variants: a gasoline version and a hybrid version. The gasoline version is equipped with a 3.5L engine, delivering a maximum power of 258kW and a maximum torque of 361Nm. The hybrid version also features a 3.5L engine, with a maximum power output of 320 horsepower. The Infiniti Q50 has body dimensions of 4867mm in length, 1823mm in width, and 1456mm in height, with a wheelbase of 2898mm.
9
2
Share

Can HanTang Electric Vehicles Be Licensed?

HanTang electric vehicles cannot be licensed. Here is some information about HanTang electric vehicles: 1. Reason for not being licensed: HanTang electric vehicles have not been included in the production catalog of the Ministry of Industry and Information Technology of China, nor have they obtained the national 3C certification. They do not meet the legal requirements for vehicle registration and cannot be licensed or driven on public roads. 2. Company profile: Shandong HanTang Electric Vehicle Technology Co., Ltd. was established on May 12, 2017. The legal representative is Tang Shichao. The company's business scope includes: research, development, production, sales, and technical services of electric vehicles and non-road tourist sightseeing vehicles; processing and sales of auto parts; solar photovoltaic power generation and electricity sales.
20
5
Share

How much horsepower does the Infiniti Q70 have?

The Infiniti Q70's engine has 211 horsepower. The Infiniti Q70 is a mid-to-large luxury sedan, equipped with a 2.0-liter turbocharged engine across the entire lineup. This engine is the same as the 2.0-liter turbocharged engine found in the Q50L. The 2.0-liter turbocharged engine in the Infiniti Q70 delivers a maximum power of 155 kW, a maximum torque of 350 Nm, with the maximum power achieved at 5,500 rpm and the maximum torque available between 1,500 to 3,500 rpm. It features direct fuel injection technology, uses an aluminum alloy cylinder head and block, and is paired with a 7-speed automatic transmission.
10
5
Share

VTEC Oil Pressure Switch Circuit Too High?

VTEC oil pressure switch circuit being too high may be due to the need for an oil change or a faulty VTEC solenoid valve. 1. Reasons for VTEC oil pressure switch circuit being too high: The need for an oil change and a faulty VTEC solenoid valve. If the solenoid valve fails to open, oil cannot enter the rocker arm chamber, keeping the rocker arm oil pressure switch in a closed state, which results in excessively high voltage in the switch circuit. 2. Inspection and repair: (1) Check if the solenoid valve's ground and power supply wires are shorted to the positive terminal. (2) Verify whether the pressure signal feedback from the pressure switch is normal. (3) Check if the solenoid valve is functioning properly. (4) Inspect if the pressure switch is operating correctly. (5) Examine the oil pressure in the VTEC system's oil passages.
17
1
Share

At how many kilometers should the second vehicle maintenance be performed?

Vehicle second maintenance is performed at around 10,000 kilometers. Below is an introduction to car maintenance knowledge: 1. Meaning: The second-level maintenance of a vehicle refers to inspection and adjustment-centered maintenance operations performed on motor vehicles that have traveled a certain mileage. 2. Maintenance scope: Inspect and adjust the working condition of the engine and electrical equipment, dismantle and clean the oil pan and oil filter, inspect and adjust the steering and braking mechanisms, dismantle and clean the front and rear wheel hub bearings. Add lubricating oil, dismantle and inspect tires, and perform tire rotation. 3. Maintenance purpose: Maintain various parts, mechanisms, and assemblies of the vehicle to ensure they have good working performance and normal operation.
16
1
Share

How to Switch Between Hybrid Modes?

Hybrid vehicles are automatically controlled by the computer system. The engine will engage when the car reaches a certain speed, and you can also manually switch between hybrid mode and pure electric mode. Advantages of hybrid vehicles: 1. Fuel efficiency—in congested urban areas, the internal combustion engine can be turned off, allowing the battery to power the car, which also reduces pollutant emissions. 2. With a battery, the car can efficiently recover energy during braking, idling, and downhill driving. 3. Being a hybrid, you don’t have to worry about the high energy consumption issues faced by pure electric vehicles, such as air conditioning and heating. 4. Strong starting power—during acceleration, the electric motor in a hybrid car can effectively compensate for the low-torque weakness of the internal combustion engine at low speeds.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.