···
Log in / Register

When Should the First Maintenance of a Car Be Done?

1Answers
SanEmilia
07/25/2025, 02:07:52 AM

It is appropriate to perform the first maintenance on a new car after 3 to 5 months or when it has traveled 3,000 to 5,000 kilometers, whichever comes first. Maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as automobile maintenance. The functions of car maintenance include: 1. Ensuring the vehicle is in excellent performance condition; 2. Improving the vehicle's efficiency and reducing the wear of its parts and tires; 3. Enhancing driving safety; 4. Avoiding vehicle problems that could lead to hazards; 5. Reducing noise and environmental pollution; 6. Keeping the vehicle's appearance clean and preventing damage.

Was this review help?
110
Share
More Q&A

How to Check the Results After Passing the Second Driving Test?

Here are the specific methods to check the results of the second driving test: 1. Signature: After completing the second driving test, you need to sign to confirm your score, and the score sheet will display your test results. 2. Driving school or instructor: If you are unsure about your score, you can inquire with your driving school or instructor. 3. Online check: Log in to the official website of the Ministry of Public Security's Internet Traffic Safety Comprehensive Service Management Platform to check your results. More information about the second driving test is as follows: Introduction: The second driving test includes reversing into a garage, parallel parking, curve driving, right-angle turns, and stopping and starting on a slope. After entering the car, the candidate should adjust the seat, fasten the seat belt, adjust the rearview mirror, and input their fingerprint as required. When the voice prompt indicates the start of the test, release the handbrake to begin the test.
115
Share

What are the symptoms of carbon buildup in motorcycles?

Motorcycle carbon buildup manifests in the following ways: engine shaking, difficulty in cold starts, sensor signal failure and three-way catalytic converter malfunction (i.e., exhaust system blockage), unstable idle speed, intake backfire, exhaust popping, decreased vehicle horsepower, etc. Another phenomenon is that when the hot engine shuts down, it cannot stop working immediately, leading to increased fuel consumption and excessive emissions. Carbon buildup includes two concepts: 1. Engine carbon buildup: A coking-like substance produced by unsaturated olefins and colloids in fuel under high temperatures during engine operation. 2. Carbon buildup in EDM (Electrical Discharge Machining): Carbon buildup in EDM is something that should be avoided as much as possible, especially in precision mold processing where it can have fatal effects.
103
Share

Why Are the Brakes Making Loud Noises?

Here are the reasons why brakes make loud noises: 1. Rust on brake discs or pads: After prolonged parking, especially in humid or rainy conditions, rust or dirt may form on the brake discs or pads. This issue can usually be resolved by driving for a while or by applying butter or specialized lubricant to the connection between the brake pads and calipers. 2. New brake pads: New cars or recently replaced brake pads may produce similar noises. New brake pads and discs require a break-in period, during which such noises are normal. However, if the noise persists after extended use, it may indicate a problem. 3. Excessive wear on brake discs or pads: Both brake discs and pads are high-wear components that undergo friction with each use. Over time, wear will naturally occur, leading to noise when excessively worn. Regular inspection and replacement are necessary. Typically, brake pads should be replaced every 60,000-80,000 kilometers, while brake discs should be replaced every 100,000-120,000 kilometers. 4. Installation issues: If brake pads are installed incorrectly or are of the wrong model, they may produce noise. Reinstalling the brake pads can help. Car owners should always have brake pads installed at professional auto repair shops, especially those who have had them replaced at roadside stalls.
103
Share

What's the Difference Between Six-Cylinder and Four-Cylinder Engines in Cars?

The differences between four-cylinder and six-cylinder engines in cars lie in power, comfort, fuel consumption, and cost. Here are the detailed explanations: 1. In terms of power, a six-cylinder engine has two more cylinders than a four-cylinder one, so it provides significantly higher power output. The acceleration and maximum speed of six-cylinder models are superior to four-cylinder ones. 2. Regarding comfort, more cylinders generally mean better engine balance and lower noise levels. Thus, six-cylinder engines offer an advantage in comfort. 3. For fuel consumption, since six-cylinder engines deliver more power, they consume relatively more fuel during operation. Therefore, four-cylinder engines are more fuel-efficient. 4. In terms of cost, four-cylinder engines have a simpler structure, making them not only cheaper to manufacture but also less costly to maintain. On the other hand, six-cylinder engines are more complex, resulting in higher manufacturing and maintenance costs.
104
Share

Can You Pour Cold Water on Overheated Tires?

You should not pour cold water on overheated tires. When a bucket of cold water is suddenly poured onto a tire at high temperature, the local thermal expansion and contraction can cause deformation of the tire's internal structure. Rapid temperature changes can create conflicts between the layers of the tire, and if the tire is already aged, there is a high risk of explosion. Moreover, if the temperature is excessively high, the wheel hub is also highly likely to crack. Precautions for hot weather: 1. Check the tire surface condition: If the tire is severely aged, the tread is heavily worn, there are deep scratches on the surface, or the tire has bulges, it should be replaced immediately. 2. Check tire pressure: Both overinflation and underinflation are major hazards for tire blowouts. 3. Avoid overloading and speeding: Tires have their own load ratings and maximum speed limits. Exceeding these limits will inevitably increase driving risks. 4. Avoid frequent braking: Braking increases the load on the tires, and the more abruptly you brake, the greater the load on the tires.
115
Share

What is the power of Tesla's motor?

Tesla motor power is 194kW. The following is a detailed explanation about Tesla: 1. Background: Tesla, Inc. is an American company that produces and sells electric vehicles, founded by engineer Martin Eberhard on July 1, 2003, with its headquarters located in Silicon Valley, California. 2. Development history: Tesla's initial entrepreneurial team mainly came from Silicon Valley, using IT concepts to manufacture cars instead of following the traditional approach represented by Detroit automakers. Therefore, Tesla's venture into electric vehicles is often seen as a story of a Silicon Valley upstart challenging the Detroit giants.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.