···
Log in / Register

What is the weight of Wuling Hongguang?

6Answers
StJourney
07/28/2025, 03:51:00 PM

Wuling Hongguang's weight varies depending on the configuration, but the overall vehicle weight is around 1200kg. Wuling Hongguang is the first independently developed crossover product between commercial vehicles and passenger vehicles launched by SAIC-GM-Wuling. With its streamlined exterior design, versatile and practical spacious driving space, perfect balance between power and economy, and strong performance in handling and safety, it has subverted people's traditional impression of commercial vehicles. Taking the 2020 Wuling Hongguang as an example, it belongs to the microvan category, with body dimensions of 4390mm in length, 1660mm in width, and 1750mm in height, a wheelbase of 2720mm, and a fuel tank capacity of 50 liters. It is equipped with a 1.2L naturally aspirated engine, with a maximum power of 56kW and a maximum torque of 110Nm, paired with a 5-speed manual transmission.

Was this review help?
102
Share
Byron
08/11/2025, 07:37:32 PM

I'm a seasoned driver who often drives the Wuling Hongguang, and I feel its weight is around 1,400 kilograms, which is quite suitable for daily use. The weight provides stability, preventing excessive sway when carrying cargo or passengers, especially on highways where it doesn't feel too light. Weight also affects fuel consumption; I usually pay attention to controlling the load when hauling goods to avoid increased fuel costs. With a light load, the fuel consumption is around 7L/100km. Additionally, weight impacts the suspension system, causing faster tire wear, so I regularly check tire pressure to extend their lifespan. While driving, the stability is good, but I make sure to slow down early when turning to avoid rollover risks. In short, understanding the weight helps optimize driving habits.

Was this review help?
3
Share
Expand All
ParkerDella
09/30/2025, 02:14:16 AM

I've been into car modifications for years. The kerb weight of the Wuling Hongguang is around 1,380kg, which directly affects its performance. Lightweight design improves acceleration, but this weight ensures handling stability, especially when climbing hills without straining the engine. I pay attention to brake system compatibility - greater weight means stronger inertia and slightly longer stopping distances, so I regularly inspect brake discs during maintenance. Body rigidity is also crucial; heavier vehicles provide cushioning in collisions but require caution against body roll when cornering. Controlling weight in daily maintenance can save significant fuel costs.

Was this review help?
5
Share
Expand All
ClaireAnn
11/13/2025, 03:05:40 AM

From a fuel-saving perspective, the Wuling Hongguang weighs around 1,400kg, which is still considered economical for its class. I've done the calculations - fuel costs account for a significant portion, and a heavier vehicle increases fuel consumption. For example, when fully loaded, it consumes over 9L/100km. Therefore, I often remind myself not to pile too many items in the trunk, as maintaining weight balance can save money. Weight also affects tire pressure - too low or too high increases wear. I check tire pressure quarterly to ensure optimal performance. Additionally, when purchasing accessories, I choose lightweight materials to avoid adding extra weight to the vehicle.

Was this review help?
9
Share
Expand All
AdelineLee
01/03/2026, 09:58:23 PM

As a safety-conscious individual, my research indicates that the Wuling Hongguang weighs over 1,300 kilograms, which provides a certain level of protection in accidents by absorbing impact forces through inertia during high-speed collisions. However, excessive weight may increase inertia, making it prone to loss of control during sharp turns, so I always maintain a safe speed while driving. Key considerations include the coordination between weight and suspension—too light and it becomes unstable in windy conditions, but this model strikes a balance between comfort and durability. Regular maintenance of the body structure is essential to prevent rust, which could add to weight-related risks.

Was this review help?
5
Share
Expand All
DiAiden
03/31/2026, 10:20:51 PM

I am an ordinary user who drives a Wuling Hongguang to pick up my kids from school. Its weight of approximately 1400kg provides a stable ride with minimal vibrations on bumpy roads. Compared to lighter vehicles, this weight prevents skidding in rainy conditions and results in lower noise levels. I pay attention to load distribution, such as avoiding overloading the trunk to prevent affecting steering. The weight also impacts daily consumables; for instance, tire lifespan is slightly shorter, so I replace them every two years. Overall, the experience is comfortable and well-suited for family use.

Was this review help?
9
Share
Expand All
More Q&A

Which Headlight is the Brightest for Small Cars?

The first type is the original halogen bulb, the second is the xenon lamp, and the third is the LED headlight, which is the brightest. Halogen bulb lighting principle: After being powered on, electrical energy heats the tungsten filament to an incandescent state for illumination, converting electrical energy into thermal energy and then into light energy. Thomas Edison, the inventor of the bulb, conducted countless experiments to find "tungsten filament" as the suitable filament. This is the first-generation product with the advantages of low cost and simple production, but the disadvantages are high temperature, poor durability, and low brightness. Xenon lamp lighting principle: The ballast increases the original vehicle voltage from 12V to 23000V to excite arc illumination, also converting electrical energy into thermal energy and then into light energy. The advantages are high brightness, 4-6 times brighter than the original halogen bulb, but the disadvantages are extremely high temperature (up to 300-400 degrees), frequent occurrences of melted lamp sockets and yellowed lamp covers, very high power consumption, poor stability, slow start-up, and delay. LED headlight lighting principle: After being powered on, the LED chip directly emits light (exciting chemical energy to directly emit light), converting electrical energy directly into photoelectric energy, skipping the step of converting into thermal energy. Therefore, LED light sources are also called cold light sources.
109
Share

Is a Driver's License Required for Motorcycle Refueling?

No driver's license is required for motorcycle refueling. Motorcycle Introduction: A two- or three-wheeled vehicle driven by a gasoline engine and steered by handlebars to control the front wheel. It is lightweight, flexible, and fast, widely used for patrols, passenger and cargo transportation, and also serves as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. Motorcycle License: According to China's 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' the licenses that permit motorcycle driving are classified into three types: D, E, and F. Among them, the D license allows driving E and F class vehicles; the E license permits driving F class vehicles; the F license is restricted to F class only, with no other vehicle types permitted.
103
Share

How Often Should Motorcycle Shock Absorber Oil Be Replaced?

Motorcycle shock absorber oil should generally be replaced every 3,000-6,000 kilometers. Method for replacing shock absorber oil: Remove the dust cover, use a screwdriver to pry open the retaining ring, and carefully observe the small groove marks on the oil seal. If the groove faces upward, place the new oil seal in this direction, reinstall the retaining ring, and then install the dust cover. Function of the oil seal: It is a mechanical component used to seal grease, isolating the parts that need lubrication from the output parts in the transmission system to prevent lubricating oil from leaking out. A motorcycle is a two-wheeled or three-wheeled vehicle driven by a gasoline engine and operated by hand, used as sports equipment.
102
Share

What Are the Reasons for No Response When Pressing the Car Lock Button?

No response when pressing the car lock button could be due to the car key battery being dead or signal interference near airports or wireless transmission towers. Additionally, the vehicle may not respond if it is out of fuel or battery power. Dead Remote Key Battery: If you find that the remote key does not respond when unlocking or locking the car, and the small light on the key does not flash, it is highly likely that the battery inside the key is dead and needs to be replaced. Although the remote key battery is dead, the mechanical key hidden within the remote key can still unlock or lock the car. If you have time, replacing the remote key battery at a 4S shop takes only about ten minutes. Signal Interference: Due to strong radio interference, the signal from the remote key cannot be successfully received by the vehicle. In this case, you should move the vehicle to a more distant location and then try the key's function again.
119
Share

How to Set the Time on Wuling Hongguang?

Method to set the time on Wuling Hongguang: 1. Ignite the engine, and the time will be displayed on the radio in the center console; 2. There are two buttons labeled H and M on the center console, which are used to adjust the hour and minute respectively; 3. Press and hold the button with H, and when the hour on the radio starts blinking, rotate the central power button left or right to adjust the hour; 4. After setting the hour, adjust the minute by pressing and holding the button with M. When the minute starts blinking, rotate the central power button left or right to set the minute. The Wuling Hongguang is the first crossover product independently developed by SAIC-GM-Wuling, positioned between commercial vehicles and passenger cars, featuring a 2+2+3 seating layout.
102
Share

What should be noted when replacing a car battery?

Precautions for replacing a car battery: 1. Whether removing or installing, be careful not to touch metal when twisting the positive battery terminal; 2. When purchasing a battery, ensure it matches the original battery model of your vehicle for proper usage; 3. During replacement, maintain power connection to avoid resetting some electronic devices in the car; 4. For a power-connected replacement, first connect the new battery to the vehicle's power source, then remove the old battery before installing the new one; 5. After installing a new battery, drive for about half an hour to allow the battery to charge and ensure sufficient power; 6. After installation, test all electronic devices in the car, such as power windows and audio equipment, to ensure they function normally.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.